1. Introduction
The Brita Maxtra Water Filter Cartridges are designed to improve the taste and quality of your tap water. These cartridges effectively reduce substances such as limescale, chlorine, and certain heavy metals like lead and copper, which can be present in domestic water supplies. By filtering your water, the Maxtra cartridge helps to ensure that beverages like tea and coffee develop their full aroma and flavor, and it also protects small domestic appliances from limescale build-up.
2. Product Overview
The Brita Maxtra filter cartridge is a key component for Brita water filter jugs and compatible appliances. It features a unique filtration technology to deliver cleaner, clearer water. Each cartridge is designed for approximately one month of use, ensuring consistent filtration performance.
Figure 1: Retail packaging for Brita Maxtra Water Filter Cartridges. The box displays the Brita logo, "MAXTRA Technology", and indicates a 6-month supply. It also features a gold seal with "DAS ORIGINAL" (The Original) and "Vertrauen Sie auf 40 Jahre Erfahrung!" (Trust in 40 years of experience!). Several individual filter cartridges are depicted on the box.
Key Features:
- Reduces limescale, chlorine, and other impurities for improved taste.
- Compatible with all Brita Maxtra jugs, partner kettles, and Massimo machines.
- Helps prolong the life of domestic appliances by reducing limescale build-up.
- Each cartridge provides optimum performance for approximately one month.
- 100% recyclable.
3. Setup and Installation
- Preparation: Remove the new Maxtra filter cartridge from its protective wrapper.
- Initial Soak (Optional but Recommended): For best results, submerge the cartridge in a bowl of water for a few minutes to remove any air bubbles.
- Insert Cartridge: Firmly insert the cartridge into the funnel of your Brita water filter jug or compatible appliance until it clicks into place.
- Initial Filtration: Fill the jug with tap water. Discard the first two fillings of filtered water. This primes the filter and removes any loose filter particles.
- Activate Memo/Indicator: If your Brita jug has an electronic filter change indicator (Memo), press and hold the START button until the four bars appear and flash twice. This indicates the filter life has been reset.
4. Operating Instructions
Once installed, the Brita Maxtra cartridge filters water as it passes through. Simply fill the jug with tap water, and the water will flow through the cartridge into the main reservoir. The filtered water is then ready for consumption or use in cooking and beverages.
- Always use cold tap water for filtration.
- Do not expose the filter jug to direct sunlight or heat sources.
- Store filtered water in a cool, dark place, preferably in the refrigerator.
5. Maintenance and Replacement
For optimal performance and hygiene, it is crucial to replace your Brita Maxtra filter cartridge regularly.
- Replacement Frequency: Replace the filter cartridge approximately every four weeks (or after filtering about 100 liters of water), regardless of the water hardness.
- Replacement Procedure:
- Remove the used cartridge from the funnel.
- Follow the "Setup and Installation" steps (Section 3) for the new cartridge.
- Reset the filter change indicator on your jug, if applicable.
- Disposal: Brita Maxtra cartridges are 100% recyclable. Please check with your local recycling facilities for proper disposal methods or Brita's recycling programs in your region.
- Cleaning the Jug: Regularly clean your Brita water filter jug, especially the funnel and reservoir, with mild detergent and warm water.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow filtration rate. | Air bubbles trapped in the filter, or filter is nearing end of life. | Remove the filter, re-soak it in water to release air, then reinsert. If the problem persists, replace the filter. |
| Unusual taste in filtered water. | Filter not properly primed, or filter has exceeded its lifespan. | Ensure the first two fillings were discarded after installation. Replace the filter if it has been in use for more than four weeks. |
| Water leaking from the filter area. | Cartridge not seated correctly. | Remove the cartridge and reinsert it firmly until it clicks into place. |
7. Specifications
- Model: Maxtra
- Compatible Water Purifier Models: BRITA Marella XL Water Filter Jug (and other Maxtra compatible systems)
- External Testing Certification: TUV
- Approximate Filter Lifespan: 1 month (or 100 liters)
- Item Weight (per pack): 1.73 pounds (approx. 27.68 ounces)
- Packaging Dimensions: 4.57"D x 9.57"W x 4.57"H
- Recyclability: 100% recyclable
8. Warranty and Support
For specific warranty information regarding your Brita Maxtra Water Filter Cartridges, please refer to the packaging or contact Brita customer service directly. General product support and additional information can be found on the official Brita website or by visiting the Brita Store on Amazon.
