Introduction
This instruction manual provides essential information for the proper setup, operation, and maintenance of your BLACK+DECKER 79-010-4 Workmate Swivel Grip Pegs. These pegs are designed to enhance the versatility of your Workmate workbench, allowing for secure clamping of various workpiece shapes.
Setup
The BLACK+DECKER 79-010-4 Swivel Grip Pegs are compatible with all BLACK+DECKER Workmate models. Installation is straightforward:
- Identify Peg Holes: Locate the designated peg holes on the surface of your Workmate workbench. These are typically circular openings designed to accommodate Workmate accessories.
- Insert Peg: Take one swivel grip peg. Align the cylindrical base of the peg with a peg hole on your Workmate.
- Secure in Place: Gently push the peg down into the hole until it clicks or sits firmly. The flexible design allows for a secure fit. Repeat for additional pegs as needed for your task.

Figure 1: A set of four red BLACK+DECKER 79-010-4 Workmate Swivel Grip Pegs. Each peg features a flat, ribbed top surface for gripping and a cylindrical base with flexible prongs for insertion into a Workmate workbench.
Operating Instructions
These swivel grip pegs provide enhanced workholding capabilities for your Workmate. Follow these guidelines for effective use:
- Positioning Workpieces: Place your workpiece on the Workmate surface between the movable jaw and the installed swivel grip pegs.
- Clamping Irregular Shapes: The swivel design of the pegs allows them to adapt to the contours of irregularly shaped objects, providing a secure grip where traditional clamps might struggle.
- Applying Pressure: Use the Workmate's crank handle to move the adjustable jaw, applying even pressure against the workpiece and the swivel grip pegs. Ensure the workpiece is held firmly without excessive force that could cause damage.
- Multiple Pegs: For larger or more complex workpieces, utilize multiple pegs to distribute clamping force and enhance stability.
Maintenance
To ensure the longevity and optimal performance of your swivel grip pegs, consider the following maintenance tips:
- Cleaning: Wipe the pegs clean with a damp cloth after use to remove dust, sawdust, or other debris. Avoid harsh chemicals that may degrade the plastic material.
- Storage: Store the pegs in a dry place, away from direct sunlight and extreme temperatures, when not in use. This helps prevent material degradation.
- Inspection: Periodically inspect the pegs for any signs of wear, cracks, or damage. Replace any damaged pegs to maintain safe and effective operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pegs do not fit securely in Workmate holes. | Holes may be obstructed or pegs are not fully inserted. | Clear any debris from the Workmate holes. Ensure the peg is pushed down firmly until seated. Verify Workmate model compatibility. |
| Workpiece slips when clamped. | Insufficient clamping pressure or improper peg placement. | Increase clamping pressure using the Workmate handle. Reposition pegs to better distribute force and accommodate the workpiece shape. Ensure pegs are clean and free of slippery residue. |
| Pegs appear damaged or worn. | Normal wear and tear or excessive force applied. | Replace damaged pegs immediately to maintain safety and effectiveness. Avoid applying excessive force during clamping. |
Specifications
- Model Number: 79-010-4
- Brand: BLACK+DECKER
- Material: Plastic
- Color: Black (Note: Product image shows red, but specification lists black. User should refer to actual product for color.)
- Item Dimensions (L x W x H): 3.9 x 1.5 x 5.9 inches
- Item Weight: 3.2 ounces (per 4-pack)
- Package Quantity: 4 pegs
- Compatibility: All BLACK+DECKER Workmate models
Warranty Information
BLACK+DECKER Tools and Home Products are warranted for two (2) years from the date of purchase. This warranty does not cover damage resulting from negligent handling, misuse, or lack of reasonable maintenance and care. Proof of purchase may be required for warranty claims.
For detailed warranty terms and conditions, please refer to the official BLACK+DECKER website or contact customer support.
Support
For further assistance, product inquiries, or to purchase replacement parts, please visit the official BLACK+DECKER website or contact their customer service department. Always refer to your product's model number (79-010-4) when seeking support.
Online Resources: www.blackanddecker.com