Oeuf Classic Toddler Bed User Manual

1. Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Oeuf Classic Toddler Bed. Please read all instructions carefully before assembly and retain this manual for future reference. The Oeuf Classic Toddler Bed is designed to facilitate your child's transition from a crib to an independent sleeping space, offering a low mattress position and protective side rails.

Figure 1: The Oeuf Classic Toddler Bed in Walnut, featuring its distinctive white frame and wooden base.

2. Safety Information

WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.

• Always ensure all parts are securely fastened before allowing a child to use the bed. Regularly check all screws and bolts to ensure they are tight.
• Do not use this bed if any parts are missing, damaged, or broken. Contact the manufacturer for replacement parts. Do not substitute parts.
• The bed is designed for a standard full-size crib mattress measuring 28 inches by 52 inches, with a thickness of 4-6 inches. Use of a non-standard mattress may create a gap that could entrap a child.
• To prevent falls, ensure the mattress is positioned correctly and securely within the bed frame.
• Never allow children to jump on the bed. While the bed is sturdy, jumping can lead to falls and potential injury.
• Keep the area around the bed clear of cords, blinds, or other items that could pose a strangulation hazard.
• This product is intended for children comfortable with transitioning from a crib, typically up to 6 years of age.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Headboard and Footboard panels
• Side rails (with integrated safety rails)
• Mattress support base
• Bed legs
• Hardware pack (screws, bolts, Allen wrench)
• Instruction Manual

4. Assembly Instructions

The Oeuf Classic Toddler Bed is designed for straightforward assembly. All necessary tools are included. It is recommended to assemble the bed in the room where it will be used.

1. Unpack all components and lay them out on a soft, clean surface to prevent scratching.
2. Attach the bed legs to the main bed frame using the provided hardware. Ensure they are securely tightened.
3. Connect the side rails to the headboard and footboard panels. Align the pre-drilled holes and insert the bolts, tightening them with the Allen wrench. Do not overtighten.
4. Carefully place the mattress support base onto the designated ledges within the bed frame. Ensure it sits flush and is stable.
5. Place your standard crib mattress (28" x 52" x 4-6") onto the mattress support base.
6. Double-check all connections to ensure they are tight and secure before allowing your child to use the bed.

For visual guidance, refer to the product images provided.

5. Usage and Operation

The Oeuf Classic Toddler Bed is designed for ease of use and child independence. Its low profile allows children to safely climb in and out on their own, fostering a sense of autonomy. The integrated side rails provide security, helping to prevent accidental falls during sleep.

Figure 2: A child enjoying the comfort and accessibility of the Oeuf Classic Toddler Bed.

This bed is suitable for children up to approximately 6 years of age. It is compatible with a standard full-size crib mattress. The design allows for conversion into a crib with the separate purchase of crib sides, offering extended utility.

Important Note:

While the bed is constructed for durability, it is not designed for rough play such as jumping. Jumping on the bed can compromise its structural integrity over time and poses a significant risk of injury to the child. Always supervise children and encourage safe use of the bed.

Figure 3: This image illustrates the bed's robust design. However, for safety, children should not jump on the bed.

6. Care and Maintenance

To ensure the longevity and appearance of your Oeuf Classic Toddler Bed, follow these care instructions:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the non-toxic, water-based finish.
• Regular Inspection: Periodically check all hardware (screws, bolts) to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• Avoid Moisture: Protect the bed from excessive moisture and direct sunlight, which can cause warping or fading of the wood finish.
• Moving the Bed: When moving the bed, lift it rather than dragging it to prevent stress on the joints and damage to flooring.

7. Troubleshooting

The Oeuf Classic Toddler Bed is designed for durability and stability. If you encounter any issues, consider the following:

• Wobbling or Instability: This is typically caused by loose hardware. Re-check and tighten all screws and bolts. Ensure the bed is on a flat, even surface.
• Squeaking Noises: Squeaking can often be resolved by tightening all assembly hardware. If the issue persists, disassemble and reassemble, ensuring all connections are firm.
• Mattress Fit Issues: Ensure you are using a standard full-size crib mattress (28" x 52" x 4-6"). An incorrect mattress size can lead to gaps or an improper fit.

If problems persist after following these steps, please contact Oeuf customer support for further assistance.

8. Specifications

9. Warranty and Support

Oeuf products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Oeuf website. If you have any questions, require replacement parts, or need assistance with your Oeuf Classic Toddler Bed, please contact Oeuf customer support directly.

Manufacturer: Oeuf

Contact Information: Please refer to the official Oeuf website or product packaging for the most current customer support details.