Steinbach 29021
Steinbach Krystal Clear Solar Pool Cover User Manual
Model: 29021 | Brand: Steinbach
Introduction
The Steinbach Krystal Clear Solar Pool Cover is designed to efficiently warm your pool water and reduce heat loss. This lightweight, bubble-tarpaulin cover floats directly on the water surface, utilizing solar energy to increase water temperature and significantly reduce evaporation. It is suitable for 8 to 10-foot round pools, including popular models like the Intex Krystal Clear series.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your solar pool cover to ensure optimal performance and longevity.
Safety Information
Please read and understand all safety instructions before using the solar pool cover. Failure to follow these instructions could result in injury or damage.
- Not a Safety Cover: This solar cover is not a safety cover. It will not prevent drowning. Always supervise children and pets around the pool.
- Remove Before Swimming: Always remove the solar cover completely from the pool before anyone enters the water. Entanglement is a risk.
- Chemicals: Ensure proper pool chemical balance. Excessive chlorine or other chemicals can degrade the cover material over time.
- Sharp Objects: Keep sharp objects away from the cover to prevent punctures or tears.
- Storage: Store the cover in a shaded area when not in use to prolong its lifespan, especially during extreme heat or cold.
Setup
Setting up your solar pool cover is a simple process:
- Unpack: Carefully remove the solar cover from its packaging.
- Unroll: Unroll the cover and lay it flat near your pool.
- Place on Water: Gently place the cover directly onto the surface of your pool water. The bubble side should face down into the water.
- Adjust Fit: The cover is designed to float just inside the edge of the pool. Adjust it so it covers the entire water surface. For pools slightly smaller than 10 feet, the cover may overlap the edges slightly; this can be trimmed if desired, but it is not necessary for function.
The Steinbach Krystal Clear Solar Pool Cover, designed to float on the water surface.
Operating
The solar pool cover operates passively by harnessing sunlight.
- Solar Heating: The translucent material allows solar rays to pass through and heat the water. The bubbles on the underside trap this heat, preventing it from escaping back into the atmosphere.
- Evaporation Reduction: By covering the water surface, the cover acts as a barrier, significantly reducing water evaporation. This helps maintain water levels and reduces the need for frequent refilling, which can introduce colder water.
- Heat Retention: At night or on cooler days, the cover continues to insulate the pool, minimizing heat loss to the cooler air.
This diagram demonstrates how the solar cover helps to retain heat within the pool water and reduce evaporation.
The solar cover in place on a round above-ground pool, showcasing its fit and appearance when in use.
Maintenance
Proper maintenance will extend the life of your solar pool cover.
- Cleaning: Periodically rinse the cover with clean water to remove any debris or chemical residue. Avoid using harsh brushes or abrasive cleaners.
- Chemical Balance: Maintain proper pool chemical levels. High chlorine levels can cause premature degradation of the cover material.
- Handling: When removing the cover, fold or roll it carefully to avoid creasing or tearing.
- Storage: When not in use for extended periods (e.g., during winter), clean the cover thoroughly, allow it to dry completely, and store it in the included reusable carry bag. Store in a cool, dry, shaded area, away from direct sunlight and extreme temperatures.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool water not warming sufficiently. | Insufficient sunlight; cover not fully deployed; cold ambient temperatures. | Ensure pool receives maximum direct sunlight. Fully spread the cover over the entire water surface. Allow more time for heating, especially in cooler weather. |
| Cover appears to be degrading or becoming brittle. | Excessive chemical levels (e.g., high chlorine); prolonged exposure to direct sunlight when not in use; improper storage. | Check and adjust pool chemical balance. Store the cover in a shaded area or its carry bag when not on the pool. |
| Debris accumulating on the cover. | Normal environmental accumulation. | Rinse the cover with a hose before removing it from the pool to prevent debris from falling into the water. |
Specifications
- Product Name: Steinbach Krystal Clear Solar Pool Cover
- Model Number: 29021
- Dimensions: Approximately 10 feet (305 cm) diameter (fits 8 to 10-foot round pools)
- Material: Bubble tarpaulin
- Item Weight: 1.93 pounds (approx.)
- Manufacturer: Intex Recreation Corp L&G
Warranty and Support
For specific warranty information regarding your Steinbach Krystal Clear Solar Pool Cover, please refer to the documentation included with your purchase or contact the manufacturer directly. Warranty terms and conditions may vary.
If you require further assistance or have questions not covered in this manual, please contact the customer support of your retailer or the product manufacturer, Intex Recreation Corp L&G.
Manufacturer Contact Information: Please refer to the manufacturer's official website or product packaging for the most current contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.