Introduction
This manual provides detailed instructions for the Zenith Universal Remotes Bonus Pack, which includes two universal remote controllers. These remotes are designed to operate a variety of electronic devices, including televisions (TVs), video cassette recorders (VCRs), cable boxes, DVD/CD players, and Satellite DBS/C Bands. Please read this manual thoroughly before attempting to set up or operate your new universal remotes.
Image: The Zenith Universal Remotes Bonus Pack, featuring two distinct universal remote controls packaged together. One remote is silver-colored, and the other is black, both designed for multi-device compatibility.
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover off in the direction indicated by the arrow.
- Insert two (2) new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, sliding it until it clicks into place.
2. Programming Your Remote
To control your devices, the universal remote must be programmed with the correct codes. Refer to the code list provided with your remotes (not included in this digital manual) or use the auto-code search method.
Auto-Code Search Method:
- Turn on the device you wish to control (e.g., TV, VCR, DVD).
- Press and hold the CODE SEARCH button until the indicator light illuminates.
- Press the device button you want to program (e.g., TV, VCR, DVD). The indicator light will blink once and then remain lit.
- Point the remote at the device and repeatedly press the POWER button (or PLAY for VCR/DVD) until the device turns off (or begins playing).
- Once the device responds, press the ENTER button to save the code. The indicator light will turn off.
- Test the remote's functions (volume, channel, playback) to ensure proper operation. If not all functions work, repeat the auto-code search to find a more compatible code.
Operating Your Remote
Once programmed, your Zenith universal remote can control multiple devices. To switch between devices, simply press the corresponding device button (e.g., TV, VCR, CBL, DVD, SAT).
Basic Functions:
- POWER: Turns the selected device on or off.
- VOLUME UP/DOWN: Adjusts the volume of the selected audio device (usually TV).
- CHANNEL UP/DOWN: Changes channels on the selected TV or cable/satellite box.
- MUTE: Silences the audio.
- NUMBER PAD (0-9): Direct channel entry.
- PLAY, STOP, PAUSE, REW, FF: Controls playback for VCRs and DVD/CD players.
- MENU/GUIDE: Accesses on-screen menus or program guides for compatible devices.
Maintenance
Cleaning:
To clean your remote, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the remote's finish or internal components.
Battery Care:
- Replace batteries when the remote's performance diminishes or the indicator light fails to illuminate.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Dispose of used batteries responsibly according to local regulations.
Troubleshooting
- Remote not working:
- Check if the batteries are inserted correctly and are not depleted. Replace if necessary.
- Ensure there is a clear line of sight between the remote and the device.
- Verify that the correct device button (e.g., TV, DVD) is selected.
- Device not responding to commands:
- The remote may not be programmed with the correct code for your device. Try reprogramming using the auto-code search method.
- Ensure the device is powered on and not in standby mode.
- Some functions not working:
- Some universal remote codes may not support all advanced functions of every device. Try reprogramming to find an alternative code that offers better compatibility.
- Ensure the remote is in the correct device mode for the function you are trying to use (e.g., pressing 'Play' while in TV mode will not work for a DVD player).
Specifications
- Model Number: ZEN5SL310
- Manufacturer: Zenith
- Compatibility: TV, VCR, Cable boxes, DVD/CD players, Satellite DBS/C Bands
- Power Source: 2 x AAA Alkaline Batteries (not included)
- Item Weight: Approximately 1 pound (including packaging)
- Package Dimensions: Approximately 1 x 1 x 0.01 inches
- ASIN: B000OFJU34
- Date First Available: January 10, 2010
Warranty and Support
For specific warranty information regarding your Zenith Universal Remotes Bonus Pack, please refer to the documentation included with your purchase or visit the official Zenith website. For technical support or further assistance, consult the manufacturer's support resources available online.
