1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dornbracht Tara Classic Single-Lever Mixer, model 33800888-06, with a Platinum Matt finish. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
Figure 1: Dornbracht Tara Classic Single-Lever Mixer. This image displays the elegant design of the single-lever kitchen faucet in its Platinum Matt finish, featuring a high-arc spout and a sleek, minimalist handle.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Professional Installation: Installation should be performed by a qualified plumber or technician in accordance with local plumbing and building codes.
- Water Supply: Always turn off the main water supply before beginning any installation or maintenance work.
- Hot Water: Exercise caution when adjusting hot water temperatures to prevent scalding.
- Tools: Use appropriate tools for installation and avoid overtightening connections, which can cause damage.
- Product Integrity: Do not modify the product in any way. Use only genuine Dornbracht replacement parts.
3. Package Contents
Verify that all components are present before beginning installation. The package typically includes:
- Dornbracht Tara Classic Single-Lever Mixer (faucet body with handle)
- Mounting hardware (washers, nuts, gaskets)
- Flexible supply lines
- Installation instructions / User manual
4. Setup and Installation
This faucet is designed for single-hole, deck-mount installation. Follow these general steps:
- Prepare the Installation Area: Ensure the mounting surface is clean and free of debris. The required mounting hole diameter is approximately 35mm (1.38 inches).
- Turn Off Water Supply: Locate and turn off the main water supply valves to the installation area.
- Install Faucet: Insert the faucet body through the mounting hole in the sink or countertop. Ensure the base gasket is properly seated.
- Secure Faucet: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank. Tighten the nut securely using an appropriate wrench, ensuring the faucet is aligned correctly.
- Connect Supply Lines: Attach the flexible hot and cold water supply lines to the corresponding connections on the faucet body. Connect the other ends of the supply lines to the hot and cold water shut-off valves. Hand-tighten, then use a wrench for a final quarter-turn.
- Check for Leaks: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections as necessary.
- Flush Faucet: Remove the aerator from the spout. Turn on the faucet to full hot and cold for several minutes to flush out any debris from the supply lines. Turn off the faucet, reattach the aerator, and test operation.
Figure 2: Technical drawing of the Dornbracht Tara Classic Single-Lever Mixer. This diagram provides critical dimensions for installation, including overall height (325mm), spout reach (200mm), spout height (180mm), base diameter (60mm), and maximum countertop thickness (35mm) for mounting.
5. Operating Instructions
The Dornbracht Tara Classic Single-Lever Mixer is designed for intuitive control of water flow and temperature.
- Water Flow: Lift the lever handle upwards to increase water flow. Push it downwards to decrease flow and turn off the water.
- Temperature Control: Move the lever handle to the left for hot water and to the right for cold water. The further you move it, the higher the proportion of hot or cold water.
6. Maintenance and Care
To maintain the pristine Platinum Matt finish and ensure optimal performance of your Dornbracht faucet, follow these care guidelines:
- Regular Cleaning: Clean the faucet regularly with a soft, damp cloth and a mild, non-abrasive soap. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based products, or cleaners containing bleach, acids, or alcohol. These can damage the Platinum Matt finish.
- Aerator Cleaning: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any mineral deposits or debris, and rinse thoroughly before reattaching.
- Finish Protection: The Platinum Matt finish is durable but can be scratched by sharp objects. Handle with care.
Figure 3: Dornbracht surface finishes. This image illustrates various available finishes for Dornbracht fittings, with 'Platin Gebürstet 06' (Platinum Matt 06) highlighted, corresponding to the product's finish.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator; partially closed shut-off valves; debris in supply lines. | Clean or replace aerator. Fully open shut-off valves. Flush supply lines. |
| Faucet leaks from spout | Worn cartridge; mineral deposits. | Contact a qualified plumber to inspect or replace the cartridge. |
| Leaks at base of faucet | Loose mounting nut; damaged gasket. | Tighten mounting nut. Inspect and replace gasket if damaged. |
| Water temperature inconsistent | Issues with water heater; cross-connection; faulty cartridge. | Check water heater settings. Consult a plumber for cross-connection or cartridge issues. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Dornbracht |
| Model Number | 33800888-06 |
| Finish | Platinum Matt |
| Installation Method | Single hole |
| Mounting Type | Deck mount |
| Number of Handles | 1 |
| Item Weight | 5.96 pounds (approx.) |
| Product Dimensions | Refer to Figure 2 for detailed dimensions (e.g., 325mm total height, 200mm spout reach). |
Figure 4: Dornbracht Tara Classic in a kitchen setting. This image shows the faucet elegantly integrated into a contemporary kitchen design, demonstrating its functional and aesthetic appeal.
9. Warranty and Support
Dornbracht products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Dornbracht website. For technical support, replacement parts, or service inquiries, please contact Dornbracht customer service or your authorized dealer.
Dornbracht Contact Information:
Please refer to the official Dornbracht website or product packaging for the most current contact details.
