Fellowes Pulsar 300 Comb Binding Machine User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Fellowes Pulsar 300 Comb Binding Machine. Please read this manual thoroughly before using the machine to ensure proper function and to prevent damage.

The Fellowes Pulsar 300 is a medium-duty comb binding machine designed for general office use. It features a manual punch capacity of up to 15 sheets and can bind documents up to 300 sheets using a 1-1/2 inch comb. Its efficient design allows for continuous punching and binding, enhancing productivity.

Figure 1: Fellowes Pulsar 300 Comb Binding Machine in its compact, closed state.

2. Setup

1. Unpacking: Carefully remove the binding machine from its packaging. Retain all packaging materials for future transport or storage.
2. Placement: Place the machine on a stable, flat surface. Ensure adequate space around the machine for operation and paper handling.
3. Initial Inspection: Verify that all components are present and undamaged. Refer to the packing list if available.
4. Adjustable Edge Guide: Familiarize yourself with the adjustable edge guide, located on the punching platform. This guide helps center documents for accurate punching.

3. Operating Instructions

3.1 Punching Documents

1. Prepare Documents: Ensure all pages are aligned and free from staples or paper clips.
2. Adjust Edge Guide: Use the rotary edge guide to set the desired margin depth. This ensures consistent hole placement.
3. Load Pages: Insert up to 15 sheets of paper vertically into the punching slot. Vertical loading ensures accurate punch alignment. Do not exceed the maximum sheet capacity to prevent damage to the machine and ensure clean punches.
4. Punch: Firmly press the punch lever down to create the holes. Release the lever and remove the punched pages.

3.2 Selecting Comb Size

The Fellowes Pulsar 300 includes a built-in comb/document measurement device. Use this tool to determine the appropriate comb size for your document thickness. The device will indicate the correct comb diameter based on the total number of pages.

3.3 Binding Documents

Figure 2: The Fellowes Pulsar 300 in operation, demonstrating the binding process.

1. Open Comb: Place the selected binding comb onto the comb opener. Pull the comb opening lever towards you to open the comb rings.
2. Load Pages: Carefully load the punched pages onto the open comb rings. Start with the back cover, then the document pages, and finally the front cover.
3. Close Comb: Push the comb opening lever away from you to close the comb rings, securing the document.
4. Remove Document: Remove the bound document from the machine.

4. Maintenance

4.1 Cleaning

• Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the punching area is free of paper dust and debris.

4.2 Emptying the Waste Tray

The machine is equipped with a waste tray to collect paper chads from punching. Regularly empty this tray to prevent accumulation, which can affect punching performance. The waste tray is typically located at the bottom or side of the machine and can be pulled out for emptying.

5. Troubleshooting

• Paper Jams: If paper becomes jammed during punching, gently pull the paper out. If resistance is met, try to operate the punch lever slightly to loosen the paper. Never force jammed paper.
• Incomplete Punches: This may occur if too many sheets are loaded at once. Reduce the number of sheets per punch. Ensure the punch lever is fully depressed.
• Uneven Holes: Verify that the adjustable edge guide is correctly set and that pages are inserted squarely against it before punching.
• Comb Not Closing Properly: Ensure the comb is correctly seated on the comb opener and that the comb opening lever is fully operated to close the comb. The comb size should also be appropriate for the document thickness.

6. Specifications

7. Warranty and Support

The Fellowes Pulsar 300 Comb Binding Machine is backed by a limited two-year warranty. For warranty claims, technical assistance, or further support, please refer to the contact information provided with your product packaging or visit the official Fellowes website.