1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Lutron Nova T NT-600-WH Incandescent Dimmer. Please read these instructions carefully before beginning installation or use. Retain this manual for future reference.
Important Safety Information
- WARNING: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring.
- Install in accordance with all national and local electrical codes.
- Use only with incandescent or halogen lighting loads. Do not use with fluorescent, LED, or low-voltage lighting unless specifically rated for those types.
- Do not install if the product has visible damage.
- For indoor use only.
2. Product Overview
The Lutron Nova T NT-600-WH is a 1-pole, 600W slide-to-off dimmer designed for incandescent and halogen lighting. It provides smooth, continuous dimming control and features a thin profile for easy installation. The slide control allows for precise adjustment of light levels, while the integrated switch turns the lights completely off.
Figure 2.1: Front view of the Lutron Nova T NT-600-WH Dimmer.
Key Features:
- Single-pole application (controls light from one location).
- 600W maximum capacity for incandescent/halogen bulbs.
- Slide-to-off functionality for full range dimming and positive off.
- Thin profile design.
- Operates at 120V AC.
3. Specifications
| Specification | Value |
|---|---|
| Model Number | NT-600-WH |
| Brand | Lutron |
| Wattage | 600W |
| Voltage | 120V AC |
| Switch Type | 1-Pole (Single-Location Control) |
| Bulb Type Compatibility | Incandescent, Halogen |
| Operation Mode | Automatic, Off |
| Actuator Type | Slide |
| Terminal Type | Screw Terminals |
| Color | White |
| Dimensions (L x W x H) | 0.3 x 2.75 x 4.56 inches |
| Item Weight | 6.4 ounces |
| International Protection Rating | IP54 |
| UPC | 027557392006 |
4. Installation (Setup)
Tools Required:
- Screwdriver (Phillips and/or flathead)
- Wire strippers
- Electrical tape (optional)
- Voltage tester
Pre-Installation Steps:
- Turn off power: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn it OFF.
- Verify power is off: Use a voltage tester to confirm that power is off at the switch box.
- Remove the existing wall plate and switch from the wall box.
- Carefully disconnect the wires from the existing switch. Note which wire was connected to which terminal.
Wiring Instructions:
The Lutron NT-600-WH dimmer is designed for single-pole applications. It typically has two black wires (load/line) and one green ground wire.
Figure 4.1: Back view of the dimmer with wiring connections.
- Ground Wire: Connect the green ground wire from the dimmer to the bare copper or green ground wire in the wall box. If no ground wire is present, consult a qualified electrician.
- Line/Load Wires: Connect the two black wires from the dimmer to the two wires that were connected to your old switch. For single-pole applications, these wires are interchangeable. Use wire nuts to secure connections.
- Secure Wiring: Ensure all wire connections are tight and secure. Gently push the wires and the dimmer into the wall box.
- Mount Dimmer: Secure the dimmer to the wall box using the provided screws.
- Install Wall Plate: Attach the new or existing wall plate over the dimmer.
- Restore Power: Turn the power back ON at the circuit breaker or fuse box.
5. Operation
The Lutron Nova T NT-600-WH dimmer provides simple and intuitive control over your incandescent or halogen lighting.
Turning Lights On/Off:
- To turn the lights ON, slide the control lever upwards. The lights will turn on to the previously set dimming level.
- To turn the lights OFF, slide the control lever all the way down until it clicks into the 'off' position.
Dimming/Brightening Lights:
- To brighten the lights, slide the control lever upwards.
- To dim the lights, slide the control lever downwards.
6. Maintenance
Your Lutron Nova T dimmer is designed for long-lasting performance with minimal maintenance.
Cleaning:
- Always turn off power at the circuit breaker before cleaning.
- Clean the dimmer and wall plate with a soft, damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.
- Ensure the dimmer is completely dry before restoring power.
General Care:
- Do not paint the dimmer or wall plate.
- Ensure the dimmer is not overloaded beyond its 600W capacity. Overloading can cause premature failure and is a fire hazard.
7. Troubleshooting
If you experience issues with your dimmer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn ON. | Power is off at the breaker; loose wiring; bulb burned out. | Check circuit breaker; verify wiring connections; replace bulb. |
| Lights do not dim or flicker. | Incorrect bulb type (not incandescent/halogen); dimmer overloaded; loose wiring. | Ensure bulbs are incandescent/halogen; check total wattage does not exceed 600W; verify wiring. |
| Dimmer is warm to the touch. | Normal operation for dimmers. | This is normal. If it is excessively hot or smells of burning, turn off power immediately and consult an electrician. |
| Dimmer makes a buzzing sound. | Some buzzing is normal with certain incandescent bulbs; dimmer overloaded. | Try different brand of incandescent bulbs; ensure total wattage does not exceed 600W. |
If the problem persists after trying these solutions, turn off power at the circuit breaker and contact a qualified electrician or Lutron customer support.
8. Warranty and Support
Lutron products are manufactured to high-quality standards and are typically backed by a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Lutron website.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Lutron customer support directly. You can often find contact information on the product packaging or on the official Lutron website.
You can also visit the Lutron Store on Amazon for more product information and resources.
