1. Introduction
Thank you for purchasing the Oster 2613 Hand Blender. This manual provides essential information for the safe and efficient use of your appliance. Please read all instructions carefully before use and retain for future reference.
Important Safety Information
- Always unplug the blender from the power outlet before cleaning or when not in use.
- Do not immerse the motor body in water or any other liquid.
- Keep hands, hair, clothing, and utensils away from the blending shaft during operation to prevent injury.
- Avoid contact with moving parts.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use the appliance if the cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner.
- The stainless steel S-Blade is sharp. Handle with care.
2. Parts and Features
Your Oster 2613 Hand Blender consists of the following main components:
- Motor Body: Contains the 250-watt motor and speed control buttons.
- Blending Shaft: Detachable shaft with a stainless steel S-Blade at the end.
- Speed Control Buttons: Two buttons for selecting different blending speeds.
- Measuring and Blending Cup: A convenient cup for blending and measuring ingredients.
3. Setup
Before first use, ensure all packaging materials are removed and clean the blending shaft and cup as described in the 'Cleaning and Maintenance' section.
Assembly
- Align the blending shaft with the motor body.
- Twist the blending shaft clockwise until it locks securely into place. Ensure it is firmly attached before plugging in the appliance.
4. Operating Instructions
The Oster 2613 Hand Blender is designed for blending liquids, pureeing cooked foods, and preparing sauces, soups, and smoothies.
Blending
- Prepare your ingredients and place them in a suitable container, such as the included blending cup, a deep pot, or a bowl. Ensure the container is large enough to prevent splashing.
- Plug the hand blender into a standard electrical outlet.
- Immerse the blending shaft into the ingredients. Ensure the blade guard is fully submerged to prevent splashing.
- Press and hold one of the speed control buttons (Speed 1 or Speed 2) to begin blending. Speed 1 is for lighter tasks, while Speed 2 provides more power for thicker mixtures.
- Move the blender gently up and down and in a circular motion to ensure all ingredients are thoroughly blended.
- Release the speed button to stop the blender.
- Unplug the appliance from the outlet before removing the blending shaft from the ingredients.
Tips for Best Results
- For best results, cut solid ingredients into small pieces before blending.
- Do not use the hand blender to crush ice or process hard, un-cooked foods like coffee beans or grains, as this can damage the blade and motor.
- Avoid operating the blender continuously for more than one minute to prevent overheating. Allow a short break between blending cycles.
- When blending hot liquids, use caution and do not fill the container more than halfway to prevent overflow and splashing.
5. Cleaning and Maintenance
Proper cleaning and maintenance will extend the life of your hand blender.
Cleaning
- Always unplug the hand blender before cleaning.
- Twist the blending shaft counter-clockwise to detach it from the motor body.
- Wash the blending shaft and the blending cup in warm, soapy water. Rinse thoroughly and dry immediately. The stainless steel S-Blade is sharp; handle with extreme care.
- Wipe the motor body with a damp cloth. Never immerse the motor body in water or place it under running water.
- Do not use abrasive cleaners or scouring pads, as they may scratch the surfaces.
Storage
Store the cleaned and dried hand blender and its accessories in a dry place, away from direct sunlight and out of reach of children.
6. Troubleshooting
If you encounter issues with your hand blender, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; power outage; motor body not properly attached to blending shaft. | Ensure the blender is securely plugged into a working outlet. Check your circuit breaker. Re-attach the blending shaft firmly until it locks. |
| Poor blending results or motor struggles. | Ingredients are too large or too hard; container is overfilled; continuous operation for too long. | Cut ingredients into smaller pieces. Do not overfill the blending cup. Use Speed 2 for thicker mixtures. Allow the motor to cool if it has been running continuously. |
| Excessive splashing during operation. | Blade guard not fully submerged; container too full. | Ensure the blade guard is fully immersed in the ingredients before starting. Do not overfill the blending container. |
7. Specifications
- Brand: Oster
- Model: 2613
- Power: 250 Watts
- Number of Speeds: 2
- Blade Material: Stainless Steel
- Power Source: Corded Electric
- Product Dimensions: Approximately 4.9 x 17 x 4.85 inches
- Item Weight: Approximately 2.45 pounds
8. Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Oster website. Keep your purchase receipt as proof of purchase for any warranty claims.
Oster Customer Service: For assistance, please contact Oster customer support through their official website or the contact information provided in your product packaging.
