Introduction
This instruction manual provides essential information for the Disney Pixar Cars RPM #64 die-cast vehicle. This collectible toy car is designed for imaginative play and is part of the Piston Cup Series.

Image: Front of the product packaging, featuring Lightning McQueen and other Piston Cup racers.
Safety Information
WARNING: Small parts may be generated.
This product is suitable for ages 3 and up (Manufacturer Minimum Age: 36 months). It conforms to the safety requirements of ASTM F963.
Always supervise young children during play to prevent choking hazards from small parts.

Image: Age warning symbol indicating the product is not suitable for children under 3 years due to potential small parts.
Setup
The Disney Pixar Cars RPM #64 vehicle comes pre-assembled and ready for play. No assembly is required.
- Carefully remove the vehicle from its packaging.
- Dispose of packaging materials responsibly.

Image: Back of the product packaging, illustrating the RPM #64 car along with other vehicles in the Piston Cup series.
Operating Instructions
This die-cast vehicle is designed for manual operation and imaginative play.
- Place the vehicle on a flat, smooth surface.
- Push the vehicle manually to make it roll.
- Engage in imaginative play scenarios, recreating scenes from the Disney/Pixar Cars movie or creating new adventures.
Maintenance
Proper care will ensure the longevity of your die-cast vehicle.
- Cleaning: Wipe the vehicle with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the paint finish.
- Storage: Store the vehicle in a cool, dry place away from direct sunlight and extreme temperatures to prevent fading or material degradation.
- Handling: Handle the vehicle with care to avoid chipping paint or bending small parts.
Troubleshooting
Due to the simple nature of this die-cast toy, extensive troubleshooting is not typically required. However, consider the following:
- Wheels not rolling smoothly: Check for any debris or hair caught in the axles. Gently remove any obstructions.
- Damaged parts: If any part of the vehicle is broken or damaged, discontinue use, especially if small parts have detached, to prevent choking hazards.
Specifications
| Brand: | Disney |
| Model Number: | L4148 (RPM #64) |
| Material Type: | Plastic |
| Item Dimensions: | Approximately 7.5 x 5.5 x 1.75 inches (packaging) |
| Vehicle Scale: | 1:55-scale |
| Recommended Age: | 3 years and up |
| Operation Mode: | Manual |
| GTIN/UPC: | 027084641622, 027084494068 |
Warranty and Support
This product is manufactured by Mattel. For warranty information or customer support, please contact Mattel directly.
- Manufacturer: Mattel
- Consumer Relations (U.S.A.): 1-800-524-8697
- Consumer Advisory Service (Australia): 1300 135 312
- Website: SERVICE.MATTEL.COM
- Product Information: WWW.MATTEL.COM/CARS
For additional information regarding Disney/Pixar Cars, visit www.disney.com/cars.