Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Metabo HS 55 Hedge Trimmer. Please read these instructions carefully before using the tool for the first time and keep them for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the lifespan of your hedge trimmer.
Safety Features
The Metabo HS 55 Hedge Trimmer is equipped with several safety features designed to protect the user and the equipment:
- Patented Mechanical Blade Quick Stop: This feature stops the blades within 0.05 seconds, significantly reducing the risk of injury during operation.
- Metabo S-Automatic Safety Clutch: This clutch protects the blades and gearbox from damage in case of blockage by foreign objects, ensuring durability and consistent performance.
- Safety Undercut Blade: Designed for enhanced operational safety.
- Impact Protection with Branch Feed: This guard protects the user and the gearbox from kickbacks and assists in feeding branches into the cutting blades.
- Cable Strain Relief: Prevents accidental disconnection of the power cable during use.
Image: Illustration of the 0.05 second fast brake system, highlighting its rapid blade stop capability for user safety.
Image: Logo representing the Metabo S-Automatic Mechanical Safety Clutch, which protects the tool from overload.
Setup
Unpacking and Initial Inspection
Carefully remove the hedge trimmer and all accessories from the packaging. Inspect the contents for any signs of damage. If any components are damaged or missing, do not operate the tool and contact your dealer.
Included Components:
- Metabo HS 55 Hedge Trimmer (Model 620017000)
- Impact Protection
- Storage Container
Power Connection
Ensure the hedge trimmer is switched off before connecting it to a power source. Use an extension cord suitable for outdoor use and rated for the tool's wattage (450W). Secure the power cable using the integrated cable strain relief to prevent accidental disconnection during operation.
Operating Instructions
Before Operation
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear.
- Inspect the hedge for any hidden objects such as wires, fences, or debris that could damage the blades.
- Ensure the work area is clear of bystanders and pets.
Cutting Technique
The Metabo HS 55 features double-sided, diamond-ground blade teeth angled at 30 degrees, providing a clean and precise cut. For best results:
- Hold the hedge trimmer firmly with both hands.
- Maintain a stable stance.
- Move the trimmer smoothly and evenly along the hedge.
- For thicker branches, utilize the impact protection with branch feed to guide them into the cutting area.
- Avoid forcing the blades through thick material; allow the tool to work at its own pace.
Image: The Metabo HS 55 Hedge Trimmer, showcasing its ergonomic design and long blade for efficient hedge trimming.
Maintenance
Cleaning
- Always disconnect the power supply before cleaning.
- Remove plant debris from the blades and housing after each use.
- Use a stiff brush or a damp cloth for cleaning. Avoid using solvents or abrasive cleaners.
Blade Care
- Regularly lubricate the blades with a suitable blade spray or light oil to prevent rust and ensure smooth operation.
- If the blades become dull, they can be professionally sharpened. Do not attempt to sharpen them yourself unless you have the proper tools and expertise.
Storage
- Store the hedge trimmer in its provided storage container to protect the blades and prevent accidental contact.
- Keep the tool in a dry, secure location, out of reach of children.
Troubleshooting
This section addresses common issues you might encounter with your Metabo HS 55 Hedge Trimmer. For problems not listed here, please contact Metabo customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | No power supply; faulty cable; safety switch not engaged. | Check power connection and extension cord. Inspect cable for damage. Ensure both safety switches are pressed. |
| Blades stop during operation | Overload (e.g., cutting too thick branches); S-Automatic Safety Clutch activated. | Release the trigger, remove the obstruction, and restart. Avoid cutting branches exceeding the maximum cutting thickness. |
| Poor cutting performance | Dull blades; blades not lubricated; excessive debris. | Clean and lubricate blades. If dull, have them professionally sharpened. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 620017000 |
| Brand | Metabo |
| Power Source | Electric (Corded) |
| Wattage | 450 W |
| Maximum Cutting Thickness | 18 mm |
| Cutting Length | 55 cm |
| Blade Spacing | 28 mm |
| Blade Material | Alloy Steel (Diamond-ground) |
| Product Dimensions (L x W x H) | 106 x 23 x 21 cm |
| Weight | 3.6 kg |
| Fast Brake Time | 0.05 seconds |
Warranty and Support
Metabo provides a manufacturer's warranty for its products. Please refer to the warranty card included with your purchase or visit the official Metabo website for detailed warranty terms and conditions specific to your region. For technical support, spare parts, or service inquiries, please contact your authorized Metabo dealer or the Metabo customer service department.
Online Resources:
