Leviton 4710 Locking Receptacle Instruction Manual

Product Overview

The Leviton 4710 is an industrial-grade, grounding, single locking receptacle designed for demanding environments. It is rated for 15 Amps and 125 Volts, featuring an L5-15R configuration with 2 poles and 3 wires. This device is engineered for superior performance and dependability, combining high-quality materials with stringent production standards.

Image: Front view of the Leviton 4710 Single Locking Receptacle, showcasing its black housing and metal mounting straps. The NEMA L5-15R configuration is visible on the face of the receptacle.

Key Features:

• Industrial Grade: Built for severe industrial settings, ensuring durability and reliability.
• Locking Mechanism: L5-15R configuration provides a secure, twist-lock connection to prevent accidental disconnections.
• Grounding: Includes a grounding terminal for enhanced safety.
• Voltage and Amperage: Rated for 15 Amps and 125 Volts.
• Construction: Made from durable plastic material, designed for longevity.

Setup and Installation

WARNING: Installation of electrical devices should only be performed by a qualified electrician or a knowledgeable individual with a thorough understanding of electrical wiring and safety codes. Always turn off power at the circuit breaker or fuse box before beginning any electrical work to prevent electric shock or fire hazards.

Required Tools and Materials:

• Screwdrivers (Phillips and flathead)
• Wire strippers/cutters
• Voltage tester
• Electrical tape (optional)
• Electrical box (if not already present)

Installation Steps:

1. Safety First: Locate the circuit breaker or fuse that controls the power to the installation area and turn it OFF. Verify that the power is off using a voltage tester.
2. Prepare Wires: If replacing an existing receptacle, carefully remove the old device. Strip approximately 1/2 inch of insulation from the ends of the electrical wires (hot, neutral, ground).
3. Connect Wires:
   • Connect the green or bare copper ground wire to the green grounding screw on the receptacle.
   • Connect the white neutral wire to the silver screw terminal.
   • Connect the black or colored hot wire to the brass screw terminal.
   Ensure all connections are tight and secure.
4. Mount Receptacle: Carefully fold the wires into the electrical box. Secure the receptacle to the electrical box using the provided mounting screws.
5. Install Wallplate: Attach the appropriate wallplate (sold separately) over the receptacle.
6. Restore Power: Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

For detailed wiring diagrams and local electrical codes, consult a professional electrician.

Operating Instructions

The Leviton 4710 L5-15R locking receptacle is designed for secure power connections. Its locking feature prevents accidental disconnections, making it ideal for applications where a reliable power supply is critical.

Connecting a Device:

1. Ensure the device you are connecting has a compatible NEMA L5-15P locking plug.
2. Align the blades of the plug with the corresponding slots on the receptacle. The L-shaped blade will align with the L-shaped slot.
3. Insert the plug fully into the receptacle.
4. Twist the plug clockwise until it locks into place. You should feel a slight click or resistance indicating it is securely locked.

Disconnecting a Device:

1. Grasp the plug firmly.
2. Twist the plug counter-clockwise to unlock it.
3. Pull the plug straight out from the receptacle.

Important: Never force a plug into the receptacle. If it does not insert or twist easily, check for proper alignment or compatibility. Do not pull on the cord to disconnect; always grasp the plug itself.

Maintenance

The Leviton 4710 locking receptacle requires minimal maintenance. Regular inspection and cleaning can help ensure its longevity and safe operation.

Routine Checks:

• Visual Inspection: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose components.
• Connection Integrity: Ensure the receptacle is securely mounted to the electrical box and that the wallplate is firmly attached.
• Plug Fit: Verify that plugs fit snugly into the receptacle and that the locking mechanism engages properly.

Cleaning:

Before cleaning, always ensure the power to the receptacle is OFF at the circuit breaker. Use a soft, dry cloth to wipe down the surface of the receptacle and wallplate. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.

If any damage is observed or if the receptacle is not functioning correctly, discontinue use and have it inspected or replaced by a qualified electrician.

Troubleshooting

This section provides guidance for common issues you might encounter with your Leviton 4710 locking receptacle. For complex electrical problems, always consult a qualified electrician.

Common Issues and Solutions:

• No Power at Receptacle:
  • Check Circuit Breaker: Verify that the circuit breaker for the outlet is in the 'ON' position. If it's tripped, reset it.
  • Check GFCI/AFCI: If the receptacle is part of a GFCI or AFCI protected circuit, check if the GFCI/AFCI outlet or breaker has tripped and reset it.
  • Verify Wiring: Ensure all wire connections at the receptacle and in the electrical box are secure. (Only perform if qualified and power is off.)
• Plug Does Not Lock Securely:
  • Check Plug Compatibility: Ensure the plug being used is a NEMA L5-15P locking plug, compatible with the L5-15R receptacle.
  • Inspect Receptacle Slots: Look for any obstructions or damage within the receptacle slots that might prevent proper insertion or locking.
  • Inspect Plug Blades: Check the blades of the plug for bends or damage.
• Receptacle Feels Loose in Wall:
  • Tighten Mounting Screws: With power OFF, gently tighten the mounting screws that secure the receptacle to the electrical box. Do not overtighten.

If troubleshooting steps do not resolve the issue, or if you are unsure about any electrical procedure, contact a certified electrician for assistance.

Specifications

Warranty and Support

Leviton products are manufactured to the highest quality standards and are backed by Leviton's commitment to customer satisfaction.

For specific warranty information, technical support, or to inquire about replacement parts, please visit the official Leviton website or contact Leviton customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Leviton Official Website: www.leviton.com