Broan-NuTone L300

Broan-NuTone L300 High Capacity Ventilator Fan Instruction Manual

Model: L300 | Brand: Broan-NuTone

1. Product Overview

The Broan-NuTone L300 High Capacity Ventilator Fan is designed to provide powerful and quiet ventilation for various spaces, including offices, commercial buildings, and public restrooms. This fan features a single, impact-resistant centrifugal blower wheel motor that is permanently lubricated for continuous operation. With a 2.9 Sone rating and 308 CFM airflow, it ensures effective air movement while maintaining a low noise level.

The unit is constructed with a durable 20-gauge galvanized steel housing and includes an 8-inch round metal duct connector. Its versatile design allows for horizontal, vertical, or in-line ducting with an appropriate adapter. The fan can be installed in either ceiling or wall applications, and its 14" x 14" white plastic grille can be painted to match existing decor.

Key Features:

  • High-Capacity Performance: Operates with 308 CFM airflow, 2.9 Sones, and 120V for efficient ventilation.
  • Durable Construction: Features a 20-gauge galvanized steel housing and an 8-inch round metal duct connector for long-lasting use.
  • Flexible Installation: Supports horizontal, vertical, or in-line ducting, and can be installed in ceilings or walls.
  • Quiet and Continuous Operation: Permanently lubricated motor ensures quiet and reliable performance.
  • Versatile Application: Ideal for large rooms in commercial settings requiring consistent ventilation.
Broan-NuTone L300 High Capacity Ventilator Fan
Figure 1: Broan-NuTone L300 High Capacity Ventilator Fan. This image shows the complete fan unit with its white plastic grille and duct connector.

2. Safety Information

Read and understand all instructions before installing, operating, or servicing this product. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

General Safety Precautions:

  • Always disconnect power at the service panel before working on the fan.
  • Installation and wiring must be done by a qualified person in accordance with all applicable codes and standards, including fire-rated construction codes.
  • Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
  • Do not use this fan with any solid-state speed control device unless specifically approved by the manufacturer.
  • Never place any object into the fan blades.
  • This product is designed for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

Electrical Safety:

  • Ensure the electrical supply matches the voltage and current requirements specified on the product label (120V).
  • Proper grounding is essential to reduce the risk of electric shock.
  • All wiring connections must be secured and insulated to prevent short circuits.

3. Package Contents

Verify that all components are present before beginning installation:

  • Broan-NuTone L300 Ventilator Fan Unit
  • White Plastic Grille (14" x 14")
  • Installation Hardware (screws, wire connectors, etc. - specific items may vary)
  • Instruction Manual

4. Installation Instructions

The Broan-NuTone L300 fan is designed for installation in ceilings or walls. It requires an 8-inch round duct for proper ventilation. Ensure adequate space and structural support are available at the chosen installation location.

Pre-Installation Steps:

  1. Turn off power at the circuit breaker or fuse box before starting any work.
  2. Determine the optimal location for the fan, considering ducting routes and electrical access.
  3. Prepare the opening in the ceiling or wall according to the fan housing dimensions (approximately 11.75"D x 12.25"W x 12.25"H).

Mounting the Fan:

  1. Secure the fan housing to the ceiling joists or wall studs using appropriate fasteners. Ensure the housing is level and firmly attached.
  2. Connect the 8-inch round ductwork to the fan's duct connector. Seal all duct connections with duct tape or mastic to prevent air leakage. The duct can be configured for horizontal or vertical discharge.

Electrical Wiring:

  1. Route the electrical supply cable to the fan's wiring compartment.
  2. Connect the household wiring to the fan's wiring according to the wiring diagram provided in the full manual and local electrical codes. Ensure proper grounding.
  3. Secure the wiring compartment cover.

Grille Installation:

  1. Once the fan is wired and ducted, attach the white plastic grille to the fan housing. The grille is typically secured with spring clips or screws.
  2. If desired, the grille can be painted to match the room's decor before installation.
Installed Broan-NuTone Ventilator Fan in Bathroom
Figure 2: Example of a Broan-NuTone ventilator fan installed in a ceiling, demonstrating typical placement.

5. Operating Instructions

The Broan-NuTone L300 Ventilator Fan is designed for simple operation, typically controlled by a standard wall switch. It operates at a single speed.

Basic Operation:

  1. Ensure the fan is properly installed and wired to a power source.
  2. Activate the wall switch connected to the fan to turn the unit ON.
  3. Deactivate the wall switch to turn the unit OFF.

For optimal performance, operate the fan during and after activities that generate moisture or odors, such as cooking or using a public restroom, to effectively remove airborne contaminants.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your Broan-NuTone L300 Ventilator Fan. Always disconnect power before performing any maintenance.

Cleaning the Grille:

  1. Turn off power to the fan at the service panel.
  2. Carefully remove the grille from the fan housing.
  3. Wash the grille with mild soap and water. Rinse thoroughly and allow it to dry completely before reattaching.

Cleaning the Fan Interior:

  1. With the grille removed and power off, gently vacuum or wipe the fan blades and interior surfaces of the housing to remove dust and debris.
  2. Do not use abrasive cleaners or solvents.

Motor Lubrication:

The motor in your Broan-NuTone L300 fan is permanently lubricated and does not require additional oiling.

7. Troubleshooting

If you experience issues with your ventilator fan, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Fan does not operateNo power supply
Loose wiring connection
Faulty switch
Check circuit breaker/fuse
Verify all wiring connections are secure (with power off)
Test or replace the wall switch
Low airflowBlocked grille or ductwork
Ductwork too long or restrictive
Damaged fan blade
Clean grille and check duct for obstructions
Ensure ducting meets recommended specifications
Inspect fan blade for damage (with power off)
Excessive noiseLoose mounting
Debris in fan housing
Damaged motor/blower wheel
Ensure fan housing is securely mounted
Clean fan interior (with power off)
Contact customer support if motor/blower is damaged

If the problem persists after attempting these solutions, contact Broan-NuTone customer support.

8. Specifications

SpecificationDetail
BrandBroan-NuTone
Model NumberL300
Air Flow Capacity308 CFM (Cubic Feet Per Minute)
Noise Level2.9 Sones
Voltage120V
Wattage212 watts
Product Dimensions (D x W x H)11.75" x 12.25" x 12.25"
Item Weight19.26 pounds
Installation TypeCeiling Mount or Wall Mount
Duct Connector Size8-inch Round
Housing Material20-gauge Galvanized Steel
Grille Size14" x 14"
Control MethodTouch (via external switch)
Included ComponentsVent fan unit
Indoor/Outdoor UsageIndoor

9. Official Product Video

Watch the official product line video for an overview of Broan-NuTone ventilation fans.

Video 1: Broan Bath Ventilation Fans Product Line. This video provides a general overview of Broan-NuTone's range of bath ventilation fans and their features.

10. Warranty and Support

For warranty information, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Broan-NuTone website. Keep your purchase receipt as proof of purchase for warranty claims.

Broan-NuTone Official Website: www.broan-nutone.com

Related Documents - L300

Preview Broan Installer Manual for HRV150S, HRV190S, and ERV180S Ventilation Units
This installer manual provides comprehensive instructions for the installation, operation, and maintenance of Broan-NuTone HRV150S, HRV190S, and ERV180S residential heat and energy recovery ventilators. It includes technical specifications, ductwork planning, electrical connections, balancing procedures, and troubleshooting guides to ensure optimal performance and safety.
Preview Broan-NuTone Ventilation System User and Installer Manual
Comprehensive guide for Broan-NuTone ventilation systems, covering installation, operation, maintenance, and troubleshooting for models like B180H75RT, B180E75RT, B230H75RT, B210E75RT, B230H75RS, and B210E75RS. Learn how to ensure optimal indoor air quality and energy efficiency in residential settings.
Preview Broan HRV150S, HRV190S, ERV180S Heat and Energy Recovery Ventilator Installer Manual
Comprehensive installation manual for Broan-NuTone HRV150S, HRV190S Heat Recovery Ventilators and ERV180S Energy Recovery Ventilator. Covers technical specifications, installation procedures, system controls, wiring diagrams, and troubleshooting for residential use.
Preview Broan-NuTone BLP150E75NS Series Installation, Use & Care Manual
Comprehensive installation, use, and care instructions for the Broan-NuTone BLP150E75NS-HW and BLP150E75NS-PC Energy Recovery Ventilators, covering safety, setup, operation, and maintenance.
Preview Broan-NuTone AI/AIR Series Heat/Energy Recovery Ventilator User and Installer Manual
Comprehensive User and Installer Manual for Broan-NuTone AI/AIR Series Heat/Energy Recovery Ventilators (HRV/ERV). Covers installation, operation, maintenance, troubleshooting, and warranty. Visit www.Broan-NuTone.com for support.
Preview Broan-NuTone V180H75RT, V180E75RT, V230H75RT, V210E75RT, V230H75RS, V210E75RS User and Installer Manual
Comprehensive user and installer manual for Broan-NuTone's V180H75RT, V180E75RT, V230H75RT, V210E75RT, V230H75RS, and V210E75RS Heat/Energy Recovery Ventilators. Covers installation, operation, maintenance, and troubleshooting for ENERGY STAR certified units.