1. Product Overview
The Plumb Pak PP20925 is a 16-inch end outlet continuous waste assembly designed for plumbing applications. It features a durable white plastic construction and offers versatile connection options, including slip joint or direct connect. This unit is equipped with a baffle tee, facilitating efficient drainage for double-bowl sinks or similar setups.
Image 1.1: The Plumb Pak PP20925 End Outlet Continuous Waste assembly, showing its white plastic construction and configuration.
Key Features:
- Durable Plastic Construction: Ensures longevity and resistance to corrosion.
- White Finish: Provides a clean, standard appearance.
- Slip Joint or Direct Connect: Offers flexibility for various plumbing configurations.
- C to E with Baffle Tee: Designed for continuous waste applications, typically for two sink bowls draining into one trap.
- Complete Kit: Includes all necessary nuts and washers for installation.
2. Components Included
The Plumb Pak PP20925 package contains the following components:
- 16-inch End Outlet Continuous Waste Pipe
- Baffle Tee
- All necessary nuts and washers for assembly and connection
The primary material is plastic, and the color is white.
3. Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the water supply to the sink before starting any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all connections are tight to prevent leaks, but do not overtighten plastic nuts, as this can cause cracking.
- If you are unsure about any step, consult a qualified plumber.
4. Installation Instructions
This section provides general guidelines for installing the Plumb Pak PP20925 continuous waste. Specific configurations may vary.
Tools You May Need:
- Adjustable wrench or slip-joint pliers
- Bucket or pan (to catch residual water)
- Rag or towel
- Hacksaw or PVC cutter (if pipe trimming is required)
Installation Steps:
- Prepare the Area: Turn off the water supply to the sink. Place a bucket or pan under the existing drain assembly to catch any water. Remove the old drain assembly if present.
- Connect Tailpieces to Sink Drains: Attach the tailpieces from your sink drains (not included with this product) to the sink basket strainers. Ensure a good seal with plumbers putty or a gasket.
- Assemble the Baffle Tee: Connect the baffle tee to one of the sink tailpieces. The baffle tee is designed to direct water flow from both sink bowls into the trap. Ensure the slip nuts and washers are correctly positioned and tightened by hand, then snug with pliers.
- Attach Continuous Waste Pipe: Connect the 16-inch continuous waste pipe from the other sink tailpiece to the baffle tee. This pipe runs horizontally between the two sink drains. Adjust the length if necessary by cutting the pipe with a hacksaw or PVC cutter, ensuring clean, straight cuts.
- Connect to P-Trap: Attach the outlet of the baffle tee to your existing P-trap assembly. If installing a new P-trap, ensure it is correctly aligned with the wall or floor drain.
- Tighten All Connections: Hand-tighten all slip nuts first, then use an adjustable wrench or pliers to snug them an additional quarter to half turn. Be careful not to overtighten, especially with plastic components.
- Test for Leaks: Turn on the water supply and fill both sink bowls. Remove the stoppers and observe all connections for any signs of leaks. If leaks occur, tighten the affected connection slightly.
5. Operation
The Plumb Pak PP20925 continuous waste system operates passively by directing wastewater from two sink bowls into a single P-trap. Once installed correctly, water will flow from the sink drains through the tailpieces, into the continuous waste pipe and baffle tee, and then down into the P-trap and main drain line.
Ensure that sink stoppers are functioning correctly to prevent accidental overflow. Avoid pouring harsh chemicals down the drain, as they can damage plastic plumbing components over time.
6. Maintenance
Regular maintenance helps ensure the longevity and proper function of your continuous waste assembly.
- Leak Checks: Periodically inspect all connections for any signs of leaks, especially after heavy use or if you notice water under the sink.
- Cleaning: If clogs occur, disassemble the slip joint connections to clean out any debris. Avoid using chemical drain cleaners that can corrode or damage plastic pipes. A plumbing snake or a mixture of baking soda and vinegar followed by hot water can be effective for minor clogs.
- Preventative Measures: Use sink strainers to catch food particles and other debris before they enter the drain system.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Leaks at Connections | Loose slip nut, misaligned washer, damaged washer. | Tighten slip nuts (do not overtighten). Check washer alignment and condition; replace if damaged. |
| Slow Drainage / Clog | Accumulation of food particles, grease, or hair. | Disassemble and clean the continuous waste pipe and baffle tee. Use a plumbing snake for deeper clogs. Avoid chemical drain cleaners. |
| Water Backing Up | Severe clog in the P-trap or main drain line. | Clear the P-trap. If the problem persists, the clog may be further down the main drain, requiring professional assistance. |
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | PP20925 |
| Brand | Plumb Pak (by Keeney Manufacturing) |
| Product Type | End Outlet Continuous Waste |
| Size | 16 inches |
| Material | Plastic |
| Color | White |
| Connection Type | Slip Joint and Direct Connect |
| Included Components | Continuous waste pipe, baffle tee, nuts, and washers |
| Item Weight | 6.4 ounces |
| Product Dimensions | 24.15 x 16.31 x 8.26 inches (packaging/overall) |
9. Understanding Tubular Systems
For a better understanding of tubular plumbing components and how to select the right parts for your needs, please refer to the following informational video provided by Keeney Holdings LLC.
Video 9.1: This video, titled "How to Select the Right Tubular" by Keeney Holdings LLC, provides guidance on choosing appropriate tubular plumbing components, which can be helpful context for installing continuous waste systems.
10. Warranty Information
For specific warranty details regarding the Plumb Pak PP20925, please refer to the packaging or contact Keeney Manufacturing directly. General plumbing product warranties typically cover defects in materials and workmanship for a limited period from the date of purchase.
11. Customer Support
If you have questions about the installation, operation, or maintenance of your Plumb Pak PP20925, please contact Keeney Manufacturing customer support. Contact information can typically be found on the product packaging or their official website.
Manufacturer: Keeney Manufacturing
