Introduction
This manual provides essential instructions for the safe and effective use of your Woods 692 16/3-Gauge SJTW 50-Foot Trouble Light. Please read this manual thoroughly before operation and retain it for future reference. This trouble light is designed for temporary lighting in various work environments such as job sites, workshops, and garages.
Safety Information
WARNING: Electrical shock hazard. Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Read all instructions: Before using this product.
- Grounding: This product is equipped with a 3-prong grounding plug. Ensure it is plugged into a properly grounded outlet. Do not modify the plug.
- Bulb Wattage: Do not exceed the maximum recommended bulb wattage of 75 watts.
- Inspect Before Use: Check the cord, plug, and light assembly for any damage before each use. Do not use if damaged.
- Keep Away from Water: Do not immerse in water or use in excessively wet conditions.
- Disconnect Power: Always unplug the unit before changing the bulb or performing any maintenance.
- Children and Pets: Keep out of reach of children and pets.
Product Components
The Woods 692 Trouble Light consists of the following main components:
- 16/3 SJTW Cord: A 50-foot, 16-gauge, Service Junior Thermoplastic Weather-resistant cord.
- Metal Bulb Guard: Protects the light bulb from impact.
- Handle with Integrated Outlet: Provides a comfortable grip and an additional 3-prong outlet for convenience.
- Hanging Hook: Allows for easy suspension of the light.
- On/Off Switch: Located on the handle for easy control.
Image Description: A full view of the Woods 692 50-Foot Trouble Light. It features an orange 16/3 SJTW cord coiled, an orange handle with an integrated outlet and switch, and a metal bulb guard with a hanging hook. The product packaging is visible, highlighting key features like 50 ft length, 16 gauge, 13 amps, 3-wire, 100W bulb rating, outlet in handle, and handle hanger.
Setup Instructions
- Unpack: Carefully remove the trouble light from its packaging.
- Bulb Installation: Ensure the unit is unplugged. Unscrew the metal bulb guard. Carefully screw in a standard incandescent or LED bulb (maximum 75 watts) into the socket. Do not overtighten. Replace the metal bulb guard.
- Placement: Position the trouble light in the desired work area. Use the integrated hanging hook to suspend the light if needed.
- Connect to Power: Plug the 3-prong power cord into a standard 120V AC grounded electrical outlet.
Operating Instructions
- Turn On/Off: Use the switch located on the handle to turn the light on or off.
- Using the Integrated Outlet: The handle includes a 3-prong outlet. This can be used to power other tools or devices (ensure total wattage does not exceed the trouble light's capacity and the circuit's rating).
- Positioning: Adjust the position of the light as needed to illuminate your work area. The metal guard protects the bulb from accidental breakage.
Maintenance
- Cleaning: Disconnect from power. Wipe the exterior with a dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Bulb Replacement: Always unplug the unit before replacing a bulb. Allow the bulb to cool completely before touching. Unscrew the metal guard, replace the bulb (max 75W), and reattach the guard.
- Cord Care: Avoid kinking, cutting, or crushing the power cord. Store the cord neatly coiled when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to outlet, faulty bulb, switch off, or damaged cord. | Check power outlet, replace bulb, ensure switch is ON, inspect cord for damage. |
| Integrated outlet not working. | Overload, no power to main outlet. | Reduce load on outlet, check main power source. |
Specifications
- Model: Woods 692 (692SW)
- Cord Gauge: 16 AWG
- Cord Type: SJTW
- Cord Length: 50 Feet (15.2 meters)
- Maximum Bulb Wattage: 75 Watts (incandescent or LED equivalent)
- Voltage: 120 Volts AC
- Amperage Capacity: 12 Amps
- Plug Format: Type B (3-prong grounded)
- Certification: UL Listed
- Material: PVC jacket, Metal guard
- Color: Orange
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Woods product website. Keep your proof of purchase for warranty claims.
