LEDVANCE SYLVANIA 65W BR30 Incandescent Dimmable Flood Light Bulb

1. Introduction

Thank you for choosing the LEDVANCE SYLVANIA 65W BR30 Incandescent Dimmable Flood Light Bulb. This manual provides essential information for the safe and effective use of your new light bulb. Please read it thoroughly before installation and retain it for future reference.

Important Safety Information

• For Indoor Use Only: This bulb is designed exclusively for indoor applications.
• Electrical Safety: Always ensure the power is turned off at the switch or circuit breaker before installing or removing the bulb.
• Voltage Compatibility: This product is designed for 130 volts. When used on the normal line voltage of 120 volts, the light output and energy efficiency are noticeably reduced.
• Dimmable: This bulb is dimmable. Ensure your dimmer switch is compatible with incandescent bulbs.
• Heat: Incandescent bulbs generate heat. Do not touch the bulb immediately after use. Allow it to cool before handling.
• Disposal: Dispose of used bulbs according to local regulations.

2. Product Overview

The SYLVANIA 65-Watt 130-Volt BR30 Incandescent Flood Light Bulb is designed for various indoor lighting applications. It features a medium E26 base and provides a soft white light at 2850K. This bulb is dimmable, offering flexibility in lighting control.

Key Features:

• 65 Watts, 130 Volts
• BR30 Reflector Lamp Shape
• Medium Base (E26)
• Inside Frost for Soft White Light (2850K)
• Dimmable functionality
• Average rated life: 2000 hours (5000 hours at 120V)

Image: SYLVANIA 65W 130V BR30 Incandescent Flood Light Bulb with Lighting Facts label, showing 540 lumens brightness and 2850K soft white color.

Image: Packaging for SYLVANIA 65W 130V BR30 Incandescent Flood Light Bulbs, indicating a 6-pack and model number 15172-5.

Official Product Video

3. Setup

Installing your SYLVANIA BR30 incandescent flood light bulb is a straightforward process. Follow these steps carefully:

1. Turn Off Power: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch. This prevents electrical shock.
2. Allow Cooling: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
3. Unpack the Bulb: Carefully remove the new SYLVANIA BR30 bulb from its packaging. Avoid touching the glass with bare hands, as oils can reduce bulb life. If touched, wipe with a clean, dry cloth.
4. Screw In the Bulb: Gently screw the bulb into the E26 medium base socket. Turn clockwise until it is snug, but do not overtighten.
5. Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or wall switch.
6. Test: Turn on the light switch to confirm the bulb is working correctly.

4. Operating Instructions

This SYLVANIA BR30 incandescent bulb operates like a standard light bulb with the added benefit of dimmability.

• Turning On/Off: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
• Dimming: If your fixture is connected to a compatible dimmer switch, you can adjust the light output by manipulating the dimmer control. Ensure your dimmer is designed for incandescent loads.

5. Maintenance

Minimal maintenance is required for your incandescent light bulb.

• Cleaning: Ensure the power is off and the bulb is cool. Gently wipe the bulb with a soft, dry, lint-free cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Replacement: When the bulb reaches the end of its life, turn off the power, allow it to cool, and unscrew it counter-clockwise. Replace with a new SYLVANIA 65W BR30 incandescent bulb (Model 15172) or an equivalent.

6. Troubleshooting

If your light bulb is not functioning as expected, consider the following common issues:

• Bulb Does Not Light:
  • Check if the power switch is on.
  • Ensure the bulb is screwed in tightly.
  • Verify that the circuit breaker has not tripped.
  • Test the bulb in another working fixture to confirm it is not burnt out.
• Bulb Flickers:
  • Ensure the bulb is screwed in tightly.
  • If using a dimmer, ensure it is compatible with incandescent bulbs and is functioning correctly.
  • Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
• Reduced Brightness:
  • This bulb is designed for 130V. If used on a 120V line, brightness will be reduced. This is normal operation.
  • Ensure the dimmer is set to maximum brightness if full output is desired.

7. Specifications

8. Warranty and Support

Warranty: This product comes with a 30-day manufacturer's warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

Customer Support: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact LEDVANCE customer support. Refer to the LEDVANCE official website for the most current contact information.