MANHATTAN Stereo Headset with Flexible Microphone (Model 175517) - User Manual

1. Product Overview

The MANHATTAN Stereo Headset with Flexible Microphone (Model 175517) is designed for clear audio communication and listening on desktop and laptop computers. It features a comfortable over-ear design, a flexible microphone, and in-line volume control.

Package Contents

• MANHATTAN Stereo Headset (Model 175517)
• Integrated 8 ft. connecting cable with two 3.5 mm plugs (one for audio, one for microphone)

Key Features

• Padded ear cushions and adjustable headband for comfort.
• Flexible stainless steel microphone boom with a padded mic to reduce pop noise.
• Durable cable with nylon mesh protective jacket.
• In-line rotary volume control.
• Dual 3.5 mm audio and microphone jacks.

Figure 1: MANHATTAN Stereo Headset (Model 175517) showing the headset, flexible microphone, in-line volume control, and dual 3.5mm audio/microphone plugs.

2. Setup

Follow these steps to connect your MANHATTAN Stereo Headset to your computer.

1. Identify Audio Ports: Locate the audio input (microphone) and audio output (headphone) ports on your computer. These are typically color-coded: pink for microphone and green for headphones, or marked with corresponding icons.
2. Connect Headphone Plug: Insert the green 3.5 mm plug from the headset cable into your computer's green audio output (headphone) port.
3. Connect Microphone Plug: Insert the pink 3.5 mm plug from the headset cable into your computer's pink audio input (microphone) port.
4. Adjust Fit: Place the headset on your head. Adjust the headband and earcups for a comfortable fit. Position the flexible microphone approximately 1-2 inches from your mouth for optimal voice capture.

Figure 2: Close-up view of the green (audio) and pink (microphone) 3.5mm plugs, along with the in-line volume control unit.

3. Operating Instructions

Once connected, you can begin using your headset for audio playback and communication.

Volume Control

• The headset features an in-line rotary volume control located on the cable.
• Rotate the wheel upwards to increase the volume.
• Rotate the wheel downwards to decrease the volume.
• Ensure your computer's system volume is also adjusted to an appropriate level.

Microphone Usage

• Position the flexible microphone boom so the microphone is near your mouth.
• For optimal voice clarity, avoid placing the microphone directly in front of your mouth to prevent "pop" sounds.
• Most operating systems allow you to adjust microphone input levels in their sound settings. Refer to your computer's documentation for specific instructions.

Figure 3: Side view of the headset, highlighting the flexible microphone's position and the padded earcups.

4. Maintenance

Proper care will extend the life of your headset.

• Cleaning: Use a soft, dry cloth to clean the headset. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the headset in a clean, dry place. Avoid wrapping the cable too tightly to prevent damage.
• Cable Care: Do not pull on the cable to disconnect the plugs. Always grasp the plug itself.
• Avoid Extreme Conditions: Do not expose the headset to extreme temperatures, humidity, or direct sunlight.

5. Troubleshooting

If you encounter issues with your headset, refer to the following common solutions.

No Sound from Headset

• Check Connections: Ensure the green 3.5 mm audio plug is fully inserted into the correct headphone jack on your computer.
• Volume Levels: Verify that the in-line volume control on the headset cable is turned up. Also, check your computer's system volume and ensure it is not muted or set too low.
• Audio Output Settings: Confirm that your computer's audio output is set to the correct device (e.g., "Speakers/Headphones" or "Realtek High Definition Audio"). This can usually be found in your operating system's sound settings.
• Test on Another Device: If possible, test the headset on another computer or device to determine if the issue is with the headset or the original computer.

Microphone Not Working

• Check Connections: Ensure the pink 3.5 mm microphone plug is fully inserted into the correct microphone jack on your computer.
• Microphone Input Settings: Verify that your computer's microphone input is set to the correct device. Check microphone levels and ensure it is not muted in your operating system's sound settings.
• Application Settings: If using the microphone with a specific application (e.g., video conferencing software), check that application's audio settings to ensure the correct microphone is selected and not muted.
• Test on Another Device: If possible, test the microphone on another computer or device.

Poor Sound Quality / Background Noise

• Secure Connections: Ensure all plugs are securely connected. Loose connections can cause static or intermittent audio.
• Cable Interference: Keep the headset cable away from power cables or other electronic devices that might cause interference.
• Microphone Position: Adjust the microphone's position to optimize voice clarity and minimize background noise.

6. Specifications

Technical details for the MANHATTAN Stereo Headset (Model 175517).

7. Warranty and Support

MANHATTAN provides a warranty for this product and offers customer support.

• Warranty: This product is covered by a three-year warranty. Please retain your proof of purchase for warranty claims.
• Compliance: The headset complies with CE, FCC, RoHS, and WEEE standards.
• Support: For technical assistance or warranty inquiries, please visit the official MANHATTAN website or contact their customer service department. Refer to the product packaging or the MANHATTAN website for specific contact information.