Skyjacker TB520 Front OEM Track Bar Relocation Bracket

Product Overview

The Skyjacker TB520 Front OEM Track Bar Relocation Bracket is engineered to maintain proper front suspension geometry and function, especially in lifted vehicles. This bracket is essential for relocating the original equipment manufacturer (OEM) track bar to ensure correct alignment and performance throughout the suspension's full range of travel.

Image: The Skyjacker TB520 Front OEM Track Bar Relocation Bracket, a robust black metal component designed for vehicle suspension systems.

Important Safety Information

Please read and understand all safety warnings and instructions before installation and use of this product. Failure to do so may result in serious injury or property damage.

What's in the Box

Upon opening the package, verify that all components are present and undamaged. The package should contain:

• One (1) Skyjacker TB520 Front OEM Track Bar Relocation Bracket
• Associated mounting hardware (e.g., bolts, nuts, washers)
• Installation Instructions (this manual)

Installation Instructions

Professional installation is recommended. Ensure the vehicle is on a level surface and properly supported before beginning any work. Always wear appropriate safety gear, including eye protection.

1. Prepare Vehicle: Park the vehicle on a flat, stable surface. Engage the parking brake and block the wheels. Lift the front of the vehicle using a suitable jack and support it securely with jack stands.
2. Locate OEM Track Bar: Identify the existing front OEM track bar and its mounting points on the frame and axle.
3. Remove OEM Track Bar: Carefully unbolt the OEM track bar from its frame and axle mounting points. Retain all OEM hardware unless specified otherwise.
4. Position Relocation Bracket: Align the Skyjacker TB520 relocation bracket with the original frame mounting point for the track bar. The bracket is designed to reposition the track bar's pivot point.
5. Secure Bracket: Using the provided new hardware or specified OEM hardware, securely bolt the relocation bracket to the vehicle's frame. Ensure all bolts are torqued to the manufacturer's specifications. Refer to your vehicle's service manual for torque values.
6. Reattach Track Bar: Attach the OEM track bar to the new mounting point on the Skyjacker relocation bracket. Use the appropriate hardware and torque to specifications.
7. Check Clearance and Alignment: With the vehicle still on jack stands, cycle the suspension through its full travel range to check for any clearance issues or binding. Verify that the track bar operates freely without interference.
8. Lower Vehicle: Carefully lower the vehicle to the ground.
9. Final Inspection: Double-check all bolted connections for tightness. It is highly recommended to have a professional alignment performed after installation to ensure proper vehicle handling and tire wear.

Operation and Function

The Skyjacker TB520 Track Bar Relocation Bracket is a passive component that, once installed, works in conjunction with your vehicle's suspension system. Its primary function is to correct the geometry of the front track bar on lifted vehicles. By relocating the track bar's frame-side mounting point, it ensures that the axle remains properly centered under the vehicle, preventing lateral axle shift during suspension articulation. This maintains steering stability and prevents issues such as "bump steer" or uneven tire wear.

Maintenance

The Skyjacker TB520 bracket requires minimal maintenance. Regular inspection is key to ensuring its longevity and continued performance.

• Periodic Inspection: Every 3-6 months, or during routine vehicle maintenance, visually inspect the bracket for any signs of damage, cracks, or corrosion.
• Check Fasteners: Verify that all bolts securing the bracket and the track bar to the bracket are tight. Re-torque if necessary according to vehicle manufacturer specifications.
• Cleanliness: Keep the bracket free from excessive dirt, mud, and road salt, which can accelerate corrosion. Clean with mild soap and water if needed.

Troubleshooting

If you experience issues after installing the track bar relocation bracket, consider the following common problems and solutions:

• Issue: Vehicle pulls to one side or steering feels off-center.
  Solution: This often indicates that the axle is not perfectly centered. Ensure the track bar is properly adjusted (if adjustable) and that all mounting bolts are torqued correctly. A professional wheel alignment is highly recommended after installation.
• Issue: Clunking or rattling noises from the front suspension.
  Solution: Check all mounting hardware for tightness. Loose bolts can cause noise. Inspect the track bar bushings and the bracket itself for any signs of wear or damage.
• Issue: Limited suspension travel or binding.
  Solution: Re-check the installation steps to ensure the bracket is correctly positioned and that there are no interferences with other suspension components throughout the full range of suspension travel.

If problems persist, consult with a certified automotive technician or contact Skyjacker customer support.

Specifications

Warranty and Support

For information regarding product warranty, technical support, or replacement parts, please contact Skyjacker directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, Skyjacker typically offers warranties on their suspension components against defects in material and workmanship. Please refer to the official Skyjacker website for the most current warranty policy.

Skyjacker Official Website: www.skyjacker.com