Quoizel Newbury NY8318K Outdoor Wall Lantern Instruction Manual

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Quoizel Newbury NY8318K Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. This 3-light outdoor wall lantern features a classic design with clear beveled glass and a Mystic Black finish, suitable for various architectural styles.

Image: The Quoizel Newbury NY8318K Outdoor Wall Lantern in Mystic Black, showcasing its classic design and clear beveled glass panels.

Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• This fixture is ETL listed for wet locations, ensuring suitability for outdoor use in all weather conditions.
• Use only the specified bulb type and wattage: three 15-watt LED candelabra base (E12) bulbs (not included). Do not exceed the maximum wattage.
• Handle glass components with care to prevent breakage and injury.
• Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 13 pounds).
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

What's in the Box

Your Quoizel Newbury Outdoor Wall Lantern package includes the following components:

• 1 x Wall Lantern Fixture
• Mounting Hardware (screws, wire nuts, mounting plate)
• Installation Instructions

Note: Light bulbs are not included and must be purchased separately.

Setup and Installation

Follow these steps for proper installation of your outdoor wall lantern. It is recommended to have two people for installation.

1. Prepare for Installation

1. Turn off power: Locate the circuit breaker or fuse box and turn off the power to the electrical box where you will install the fixture.
2. Unpack contents: Carefully remove all components from the packaging. Lay them out on a clean, flat surface to ensure all parts are present.
3. Review dimensions: Familiarize yourself with the fixture's dimensions and mounting requirements.

Image: Detailed product dimensions and electrical specifications for the Quoizel Newbury NY8318K lantern, including fixture width, backplate size, and overall height.

2. Mount the Fixture

1. Attach the mounting plate (X bracket) to the electrical outlet box using the provided screws. Ensure it is securely fastened.
2. Adjust the mounting screws on the X bracket so they protrude approximately 1/4 inch through the fixture's mounting plate. If the provided screws are too long, shorter 8-32 1/2 inch stainless steel screws may be required (not included).

3. Electrical Connections

1. Connect the fixture's black wire to the house's black (hot) wire.
2. Connect the fixture's white wire to the house's white (neutral) wire.
3. Connect the fixture's ground wire to the house's ground wire (bare copper or green).
4. Secure all connections with wire nuts (two per fixture recommended, not always included).
5. Carefully tuck all wires into the electrical box.

4. Secure the Fixture

1. Align the fixture's backplate with the mounting screws on the X bracket.
2. Secure the fixture in place using the decorative nuts provided. Tighten firmly but do not overtighten.
3. For wet locations, apply a small bead of clear silicone sealant around the top and sides of the fixture's mounting plate where it meets the wall. Leave the bottom unsealed to allow for drainage and ventilation.

Image: Features of the Quoizel Newbury Wall Lantern, highlighting its solid brass construction and suitability for outdoor use.

Operating Instructions

• Bulb Installation: Install three 15-watt LED candelabra base (E12) bulbs into the sockets. Ensure bulbs are fully seated.
• Power On: Once installation is complete, restore power at the circuit breaker or fuse box.
• Control: The fixture is controlled by an external wall switch (not included). If connected to a dimmer switch, ensure the installed LED bulbs are dimmable.

Image: Key product highlights, including bulb base type, wet rating, and voltage requirements.

Maintenance

• Cleaning: To clean the fixture, turn off the power and wipe with a soft, damp cloth. Do not use abrasive cleaners or polishes as they may damage the finish or glass.
• Glass Care: The clear beveled glass can be cleaned with standard glass cleaner. Avoid spraying cleaner directly onto electrical components.
• Finish: The solid brass construction is designed to withstand outdoor elements. The Mystic Black finish will naturally mature and may develop a patina over time, which is a characteristic of the material and adds to its distinctive appearance.
• Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching.

Image: Features of the Quoizel Newbury Wall Lantern, emphasizing its weather, water, and heat resistance, and solid brass construction.

Troubleshooting

Specifications

Warranty

The Quoizel Newbury NY8318K Outdoor Wall Lantern is backed by a 3-Year Quoizel Limited Warranty. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and limitations, please refer to the official Quoizel warranty documentation or contact customer support.

Support

For technical assistance, replacement parts, or warranty inquiries, please contact Quoizel Customer Support:

• Website: Visit the official Quoizel website for support resources and contact information.
• Phone: Refer to the contact information provided in your product packaging or on the Quoizel website.
• Online Store: Visit the Quoizel Store on Amazon