Belkin 12-Outlet Pivot-Plug Surge Protector User Manual

Introduction

This user manual provides essential information for the safe and effective use of your Belkin 12-Outlet Pivot-Plug Surge Protector. Designed to safeguard your electronic devices from power surges and voltage fluctuations, this power strip offers versatile connectivity and robust protection for your home or office equipment.

Key Features

• 12 AC Outlets: Provides ample connectivity for multiple devices.
• 8 Rotating Outlets: Accommodates large power adapters and chargers without blocking adjacent outlets, offering flexible plug placement.
• 4 Standard Outlets: Fixed outlets for standard plugs.
• 8-Foot (2.4m) Power Cord: Offers extended reach for convenient placement.
• 4320 Joules of Surge Protection: High-level protection against power surges and spikes, safeguarding sensitive electronics.
• UL Certified: Independently tested and certified to meet or exceed UL safety standards.
• Coaxial Cable Protection: 1-in-2-out RJ11 telephone or fax protection and coaxial cable protection to safeguard cable box and satellite connections.
• Built-in Cable Management: Integrated feature to help organize cords for a tidy setup.
• 8-Point Safety System: Protection from over-temperature, overcurrent, overload, short circuit, and clamping. Includes 3-line AC protection and LED indicators for surge and ground status.

Setup

1. Unpack the Device: Carefully remove the surge protector from its packaging.
2. Placement: Position the surge protector in a stable location near the devices you intend to power. Ensure adequate ventilation around the unit.
3. Connect to Wall Outlet: Plug the surge protector's 8-foot power cord into a grounded 3-prong wall outlet.
4. Power On: Press the recessed power button on the surge protector. The orange light will illuminate, indicating the unit is powered on.
5. Check Indicator Lights:
   • A red "GROUNDED" light indicates proper grounding.
   • A green "PROTECTED" light indicates that your connected equipment is protected from surges.
   • If either light is off, consult the Troubleshooting section.
6. Connect Devices: Plug your electronic devices into the available AC outlets. Utilize the rotating outlets for larger power adapters to maximize space.
7. Coaxial/Phone Line Connection (Optional): For additional protection, connect your coaxial cable (e.g., from cable TV or satellite) and/or phone line to the designated "IN" and "OUT" ports on the surge protector.
8. Cable Management: Use the built-in cable management arm to route and secure your cables for a neat and organized setup.

Figure 1: Belkin 12-Outlet Pivot-Plug Surge Protector. Note the 8 rotating outlets on the sides and 4 standard outlets in the center.

Figure 2: Pivoting outlets allow large power adapters to be positioned without blocking adjacent outlets.

Operating Instructions

Once properly set up, operating the Belkin Surge Protector is straightforward:

• Power On/Off: Use the recessed power button to turn the entire unit on or off. This button also acts as a circuit breaker.
• Indicator Lights: Always ensure both the "GROUNDED" (red) and "PROTECTED" (green) indicator lights are illuminated when the unit is powered on. These lights confirm proper operation and protection.
• Rotating Outlets: Gently pivot the side outlets to accommodate various plug sizes and shapes. Do not force the outlets beyond their intended rotation range.

Figure 3: The surge protector features an 8-point safety system for comprehensive device protection.

Maintenance

• Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires or cracks. If damage is found, discontinue use and replace the unit.
• Overload Protection: If the power button trips (pops out), it indicates an overload. Disconnect some devices, then press the button to reset.
• Surge Protection Indicator: If the "PROTECTED" (green) light goes out, it means the surge protection components have absorbed a significant surge and may no longer be providing full protection. It is recommended to replace the unit.

Troubleshooting

Specifications

• Model: BP11223008
• Total Power Outlets: 12 (8 rotating, 4 standard)
• Joule Rating: 4320 Joules
• Maximum Spike Voltage: 6,000 Volts
• Cord Length: 8 ft (2.4m)
• Voltage: 125 Volts
• Wattage: 1875W
• Frequency: 150K Hz - 100M Hz EMI/RFI Noise Filter
• Phone Line Protection: 1-in-2-out RJ11
• Coaxial Protection: Yes
• Product Dimensions: 10" x 4.75" x 1.9" (25.4 cm x 12.06 cm x 4.82 cm)
• Item Weight: 2.3 lbs (1.04 kg)
• Color: Gray
• Manufacturer: Belkin
• Country of Origin: Vietnam

Warranty & Support

The Belkin 12-Outlet Pivot-Plug Surge Protector is backed by a 2-year warranty. Additionally, it is protected by a $300,000 Connected Equipment Warranty, which covers equipment properly connected to the surge protector from damage due to surges.

For warranty claims, technical support, or further assistance, please visit the official Belkin support website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty purposes.

For more information, you may also refer to the official User Manual (PDF).