Introduction
This manual provides essential information for the installation, operation, and maintenance of your Fender 5-Position Strat/Tele Super Switch. This high-quality switch is designed to replace worn switches or expand the tonal versatility of your instrument.
The package includes the switch, one white Strat switch tip, one black barrel-style Tele switch tip, and mounting hardware. This switch is commonly used on American-made Fat and Double Fat Stratocasters, as well as the Nashville Telecaster, and is suitable for guitars with 4-conductor wired pickups.
Image: The Fender 5-Position Strat/Tele Super Switch, showing its main body and lever.
Setup and Installation
Proper installation of the Fender 5-Position Super Switch requires careful attention to wiring and physical fitment. It is recommended that installation be performed by a qualified guitar technician if you are not experienced with guitar electronics.
Included Components:
- Fender 5-Position Super Switch
- One (1) White Strat Switch Tip
- One (1) Black Barrel-Style Tele Switch Tip
- Mounting Hardware (screws)
Image: The white Strat switch tip, black Tele switch tip, and two mounting screws included with the switch.
Installation Steps:
- Preparation: Ensure your guitar is unplugged from any amplifier. Remove the pickguard or control plate to access the existing switch and wiring.
- Removal of Old Switch: Carefully desolder all connections from the old switch and remove it from the instrument. Note the wiring configuration if you plan to replicate it.
- Physical Fitment: The Fender Super Switch is a dual-wafer design, which makes it wider and potentially deeper than standard 3-way or 5-way switches. Before soldering, test fit the new switch in the guitar's cavity to ensure adequate clearance. Some instruments may require minor routing of the body cavity for proper fit. Ensure the cover plate will not press against terminals or wires.
- Wiring: Consult a specific wiring diagram for your desired pickup configuration. The 5-Position Super Switch offers extensive wiring possibilities beyond standard 5-way switches due to its 4-pole, 5-throw design with 24 contacts. Diagrams for various configurations (e.g., coil splitting, series/parallel, phase switching) are widely available from Fender and other guitar electronics resources.
- Soldering: Solder all connections according to your chosen wiring diagram. Use multi-colored wires to help identify connections, especially with the numerous contacts on this switch. Ensure all solder joints are clean and secure.
- Mounting: Secure the switch to the pickguard or control plate using the provided mounting hardware. Attach the desired switch tip (Strat or Tele style).
- Testing: Before reassembling the guitar, temporarily connect it to an amplifier and test all switch positions to ensure correct functionality and sound output.
- Reassembly: Carefully reattach the pickguard or control plate, ensuring no wires are pinched.
Image: Bottom view of the Fender 5-Position Super Switch, illustrating the multiple contact points for wiring.
Image: Top view of the Fender 5-Position Super Switch, showing the lever mechanism and included tips and screws.
Operating Instructions
The Fender 5-Position Super Switch functions as a selector for different pickup configurations on your electric guitar. It provides five distinct positions, each corresponding to a specific wiring setup as determined by your installation.
- Move the switch lever to select between the five available pickup combinations.
- The specific tonal output for each position will depend on the wiring diagram used during installation. Common configurations include selecting individual pickups, combinations of pickups (e.g., neck and bridge), or coil-split options for humbuckers.
- The switch action is designed to be smooth and precise, ensuring reliable contact for each position.
Maintenance
The Fender 5-Position Super Switch is designed for durability and reliable performance. Minimal maintenance is required.
- Cleaning: Keep the switch area free from dust and debris. If necessary, gently clean the exterior of the switch with a soft, dry cloth. Avoid using liquid cleaners directly on the switch mechanism.
- Inspection: Periodically inspect the switch and its connections for any signs of wear, corrosion, or loose wiring. Ensure the mounting screws remain tight.
- Avoid Moisture: Protect the switch and guitar electronics from excessive moisture, which can cause corrosion and malfunction.
Troubleshooting
If you encounter issues with your Fender 5-Position Super Switch, consider the following troubleshooting steps:
- No Sound or Intermittent Sound:
- Check all soldered connections for cold joints or breaks.
- Ensure all wires are securely connected to the correct terminals on the switch and other components (pickups, pots, output jack).
- Verify that the output jack is functioning correctly.
- Scratchy Sound When Switching:
- This can sometimes indicate dust or debris within the switch mechanism. If the switch is new, this is less likely.
- Ensure the switch is properly grounded.
- Incorrect Pickup Selection/Unexpected Tones:
- Re-verify your wiring against the chosen wiring diagram. A single miswired connection can lead to incorrect functionality.
- Ensure the pickups themselves are functioning correctly.
- Switch Lever Feels Loose or Stiff:
- A new switch should have a firm, positive feel. If it feels unusually loose or stiff, inspect for any physical obstructions or manufacturing defects.
If problems persist after troubleshooting, it is advisable to consult a professional guitar technician.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 0992251000 |
| Brand | Fender |
| Mounting Type | Panel Mount |
| Switch Type | Toggle |
| Number of Positions | 5 |
| Circuit Type | Parallel |
| Contact Material | Brass |
| Terminal Type | Screw |
| Material | Brass |
| Item Weight | 5.67 g |
| Included Components | White Strat switch tip, Black Tele switch tip, Mounting hardware |
| UPC | 717669512651 |
Warranty Information
This Fender 5-Position Strat/Tele Super Switch is covered by a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets Fender's quality standards. For specific terms and conditions, please refer to the official Fender warranty documentation or contact Fender customer support.
Support
For further assistance, technical support, or warranty claims, please contact Fender customer service through their official website or authorized service centers. When contacting support, please have your product model number (0992251000) and proof of purchase available.
Fender Official Website: www.fender.com
