1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TYC 600600 Cooling Fan Assembly. This assembly is designed as a direct replacement for the original equipment in 2002-2006 Acura RSX vehicles, ensuring comparable performance and fitment. Proper installation and care are essential for optimal engine cooling and air conditioning system efficiency.
2. Safety Information
WARNING: Always prioritize safety when working on a vehicle. Failure to follow these safety guidelines may result in serious injury or damage to the vehicle.
- Ensure the vehicle is turned off, the engine is cool, and the battery is disconnected before beginning any work.
- Wear appropriate personal protective equipment, including safety glasses and gloves.
- Use proper lifting equipment and secure the vehicle on jack stands if raising it.
- Refer to your vehicle's service manual for specific procedures and torque specifications.
- Be aware of hot engine components and fluids.
- Keep children and pets away from the work area.
- Dispose of old parts and fluids responsibly.
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1x TYC 600600 Cooling Fan Assembly
4. Setup & Installation
This section outlines the general steps for installing the TYC 600600 Cooling Fan Assembly. Specific procedures may vary slightly depending on your vehicle's exact configuration. Always consult your vehicle's factory service manual for detailed instructions.
4.1 Tools and Materials Required
- Socket set and wrenches
- Screwdrivers
- Pliers
- Coolant drain pan
- New engine coolant (if draining)
- Shop rags
- Safety glasses and gloves
4.2 Installation Steps
- Prepare the Vehicle: Park the vehicle on a level surface, engage the parking brake, and disconnect the negative battery terminal. Allow the engine to cool completely.
- Access the Cooling Fan: Depending on your vehicle, you may need to remove the front bumper, grille, or other components to gain access to the radiator and cooling fan assembly.
- Drain Coolant (if necessary): If the radiator needs to be moved or hoses disconnected, drain the engine coolant into a suitable container.
- Disconnect Electrical Connector: Locate and disconnect the electrical connector from the existing cooling fan motor.
- Remove Mounting Bolts/Clips: Unfasten all bolts, clips, or other retaining hardware securing the old cooling fan assembly to the radiator or vehicle frame.
- Remove Old Assembly: Carefully lift and remove the old cooling fan assembly from the vehicle. Be mindful of any remaining hoses or wires.
- Install New Assembly: Position the new TYC 600600 Cooling Fan Assembly into place. Ensure it aligns correctly with the mounting points.

Image: Front view of the TYC 600600 Cooling Fan Assembly, showing the fan blades and shroud.
- Secure Mounting Hardware: Reinstall all mounting bolts, clips, or retaining hardware. Tighten to the manufacturer's specified torque.

Image: Rear view of the TYC 600600 Cooling Fan Assembly, showing the motor and wiring.
- Connect Electrical Connector: Reconnect the electrical connector to the new fan motor. Ensure a secure connection.

Image: Close-up of the 3-pin electrical connector, ensuring proper connection.
- Refill Coolant (if drained): If coolant was drained, refill the system with the appropriate type and amount of coolant. Bleed any air from the cooling system as per your vehicle's service manual.
- Reinstall Removed Components: Reinstall any components that were removed to access the fan assembly (e.g., bumper, grille).
- Reconnect Battery: Reconnect the negative battery terminal.
- Test Operation: Start the engine and allow it to reach operating temperature. Verify that the cooling fan activates and operates correctly. Check for any leaks.
5. Operation
The TYC 600600 Cooling Fan Assembly is an integral part of your vehicle's engine cooling and air conditioning systems. It operates automatically, controlled by the vehicle's engine control unit (ECU) or a dedicated fan control module.
- Engine Cooling: When the engine coolant temperature rises above a predetermined threshold, the fan will activate to draw air through the radiator, dissipating heat and maintaining optimal engine operating temperature.
- Air Conditioning: When the air conditioning system is engaged, the fan may also activate to draw air through the condenser, which helps cool the refrigerant and improve AC performance.
The fan may operate at different speeds depending on the cooling demand. It is normal for the fan to cycle on and off during vehicle operation, especially in stop-and-go traffic or hot weather conditions.
6. Maintenance
Regular inspection of your cooling fan assembly can help ensure its longevity and proper function.
- Visual Inspection: Periodically inspect the fan blades for any cracks, damage, or debris accumulation. Ensure the shroud is intact and securely mounted.
- Wiring Check: Verify that all electrical connections are secure and free from corrosion or damage.
- Cleanliness: Keep the radiator and condenser fins clean and free of leaves, insects, and other obstructions to allow for optimal airflow.
- Coolant Level: Regularly check your engine coolant level and ensure it is at the proper mark.
If you notice any unusual noises, vibrations, or a decrease in cooling performance, consult a qualified automotive technician.
7. Troubleshooting
If you experience issues with your cooling fan assembly, consider the following common troubleshooting steps:
| Symptom | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Blown fuse, faulty relay, wiring issue, faulty temperature sensor, faulty fan motor. | Check fuses and relays. Inspect wiring for damage. Test temperature sensor. If motor is faulty, replacement may be necessary. |
| Fan runs constantly | Faulty temperature sensor, faulty fan control module, short circuit in wiring. | Diagnose temperature sensor or fan control module. Inspect wiring. |
| Excessive noise or vibration | Damaged fan blades, loose mounting, foreign object in fan shroud, worn motor bearings. | Inspect fan blades and shroud for damage or obstructions. Ensure mounting is secure. If motor bearings are worn, replacement is needed. |
| Engine overheating | Fan not operating correctly, low coolant, clogged radiator, faulty thermostat. | Verify fan operation. Check coolant level and radiator condition. Inspect thermostat. |
If you are unable to resolve the issue after performing these checks, it is recommended to seek assistance from a certified automotive technician.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TYC |
| Model Number | 600600 |
| Compatible Vehicles | 2002-2006 Acura RSX |
| Power Connector Type | 3-Pin |
| Cooling Method | Air |
| Material | PA (Polyamide) |
| Maximum Rotational Speed | 2500 RPM |
| Item Weight | 5.5 pounds |
| OEM Part Number | 19030-PND-A01 |
| UPC | 762405231570 |
9. Warranty Information
TYC stands behind the quality of its products. This cooling fan assembly is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the documentation included with your purchase or visit the official TYC website.
10. Customer Support
If you have any questions regarding the installation, operation, or troubleshooting of your TYC 600600 Cooling Fan Assembly, please contact TYC customer support. Have your product model number and purchase information ready when contacting support.
You can find contact information on the TYC official website or through your product retailer.