1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Selkirk Metalbestos Selkirk-206024U Ultra-Temp Type HT Chimney Pipe. This product is designed for venting residential heating appliances. Adherence to these instructions and all applicable local and national building codes is critical for safety and optimal performance.
2. Safety Information
WARNING: Improper installation, operation, or maintenance can result in fire, carbon monoxide poisoning, or other serious hazards. Always consult with qualified professionals for installation and adhere to all local building and fire codes.
- Professional Installation: Installation should be performed by a certified professional in accordance with all applicable local and national building and fire codes.
- Appliance Compatibility: Ensure this chimney pipe is compatible with your specific heating appliance (wood stove, natural gas, LP gas, or #2 oil burning appliance).
- Clearances: Maintain proper clearances to combustible materials as specified by the appliance manufacturer and local codes.
- Inspection: Regularly inspect the chimney system for creosote buildup, damage, or obstructions.
- Fuel Type: Use only approved fuels for your heating appliance.
3. Product Overview
The Selkirk Metalbestos Selkirk-206024U is an Ultra-Temp Type HT insulated chimney pipe, engineered for high-temperature applications. It is suitable for venting residential heating appliances that burn natural gas, LP gas, #2 oil, and wood. Its design is optimized for use with today's airtight wood stoves, providing efficient and safe exhaust of combustion byproducts.
4. Setup and Installation
Installation of the Selkirk Metalbestos chimney system requires careful planning and adherence to specific guidelines to ensure safety and performance. Always refer to the detailed installation instructions provided with the complete Selkirk chimney system components and consult local building codes.
4.1 Pre-Installation Checks
- Verify that all components are present and undamaged.
- Confirm the chimney pipe diameter matches the appliance flue collar.
- Review local building and fire codes for specific requirements regarding chimney installation, clearances, and support.
4.2 General Installation Steps (Summary)
- Appliance Connection: Connect the first section of the chimney pipe to the appliance flue collar using appropriate adapter components.
- Vertical Run: Assemble subsequent pipe sections, ensuring secure connections. Sections typically twist-lock together.
- Support: Install appropriate support components (e.g., wall supports, roof supports, ceiling supports) at specified intervals to bear the weight of the chimney system.
- Penetrations: Use approved thimbles and firestops when passing through walls, ceilings, or roofs to maintain required clearances to combustibles.
- Termination: Install the chimney cap and flashing at the roof penetration, ensuring weather-tightness and proper draft.
- Clearances: Double-check all clearances to combustible materials throughout the entire chimney run.
For detailed, step-by-step instructions, refer to the comprehensive installation guide provided with your complete Selkirk chimney system.
5. Operating the System
Once properly installed, the Selkirk Metalbestos chimney pipe functions as a passive exhaust system for your heating appliance. Its operation is directly tied to the proper functioning of the connected appliance.
- Appliance Operation: Operate your heating appliance according to its manufacturer's instructions.
- Draft: Ensure adequate draft is maintained for efficient combustion and to prevent smoke spillage. Factors affecting draft include chimney height, temperature difference, and obstructions.
- Monitoring: Periodically observe the appliance's exhaust for signs of improper combustion, such as excessive smoke or unusual odors.
6. Maintenance
Regular maintenance is crucial for the safe and efficient operation of your chimney system. Neglecting maintenance can lead to creosote buildup, reduced performance, and fire hazards.
- Annual Inspection: Have the entire chimney system, including the Selkirk-206024U pipe, inspected annually by a certified chimney sweep.
- Creosote Removal: For wood-burning appliances, creosote buildup is a significant concern. The chimney should be cleaned as often as necessary to prevent accumulation, typically when 1/4 inch or more of creosote is present.
- Damage Check: Inspect for any signs of corrosion, dents, cracks, or loose connections. Any damaged components must be replaced immediately.
- Obstruction Check: Ensure the chimney cap and flue are free from bird nests, debris, or other obstructions.
7. Troubleshooting
If you experience issues with your venting system, consider the following common troubleshooting steps. Always prioritize safety and consult a professional if you are unsure or if problems persist.
- Smoke Spillage: Check for chimney blockages (creosote, debris), ensure the appliance door gasket is sealing properly, and verify adequate combustion air supply to the appliance.
- Poor Draft: This can be caused by a cold chimney, obstructions, or insufficient chimney height. Try pre-heating the flue or having the chimney inspected for blockages.
- Unusual Odors: May indicate incomplete combustion, creosote buildup, or a leak in the system. Cease appliance operation and have the system inspected.
- Visible Damage: Any visible damage to the chimney pipe or components requires immediate attention and replacement by a qualified professional.
8. Specifications
The following table details the key specifications for the Selkirk Metalbestos Selkirk-206024U Ultra-Temp Type HT Chimney Pipe:
| Feature | Detail |
|---|---|
| Model Number | Selkirk-206024U |
| Type | Ultra-Temp Type HT |
| Manufacturer | Jensen (Home Improvement) |
| Item Weight | 8 ounces |
| Product Dimensions | 8.75 x 8.75 x 25 inches |
| Color | No color (Metallic) |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Included Components | Selkirk-206024U |
9. Warranty and Support
This product comes with a manufacturer's warranty. For specific details regarding the warranty coverage, duration, and terms, please refer to the warranty documentation included with your purchase or visit the official Selkirk website. For technical support, installation guidance, or to report any issues, please contact Selkirk customer service directly.
Manufacturer: Jensen (Home Improvement)
Brand: Selkirk
