1. Introduction
The Woods 500 Watt Portable Work Light (Model L20) is a versatile halogen utility light designed for both indoor and outdoor use. Its robust all-metal construction ensures durability, while the high-visibility yellow cord and tempered glass with UV protection enhance safety and performance. This manual provides essential information for the safe and effective use of your work light.
2. Safety Information
WARNING: This work light generates significant heat during operation. Always exercise extreme caution.
- High Heat Output: The halogen bulb and metal components become extremely hot. Do not touch the light fixture or the protective grill when the light is on or immediately after it has been turned off. Allow sufficient time for cooling.
- Protective Grill: The integrated shadow fighter grill helps reduce shadows and provides a barrier, but it does not eliminate heat. Avoid contact with the grill when the light is active.
- Bulb Handling: When replacing the bulb, ensure the lamp is completely cool and unplugged. Use a clean cloth or gloves to handle the new halogen bulb to prevent oils from your skin from damaging the bulb and shortening its lifespan.
- Wet Locations: The light is suitable for wet locations, but ensure the grounded cord and plug are in good condition and connected to a properly grounded outlet.
- Stable Placement: Always place the work light on a stable, level surface to prevent tipping.
- Clearance: Maintain adequate clearance from flammable materials, walls, and ceilings.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Product Overview
The Woods 500 Watt Portable Work Light features a durable design for various tasks. Key components include a quartz halogen bulb encased in tempered glass, a protective wire grill, a sturdy steel stand, and a comfortable plastic handle for portability.
Figure 1: Woods 500 Watt Portable Work Light with key dimensions. The light measures approximately 12 inches in height and 8 inches in width. It features a yellow steel frame and a black light housing with a protective grill.
4. Setup
- Unpack: Carefully remove the work light and all components from the packaging.
- Inspect: Check the light for any signs of damage. Ensure the halogen bulb is securely in place and the protective grill is intact.
- Position: Place the work light on a stable, non-flammable surface.
- Connect: Plug the three-prong grounded power cord into a compatible 120V grounded electrical outlet. If an extension cord is necessary, ensure it is rated for outdoor use and can handle the 500W power requirement.
5. Operating Instructions
The Woods 500 Watt Portable Work Light is designed for straightforward operation.
- Power On/Off: The light does not feature an integrated power switch. To turn the light on or off, plug or unplug the power cord from the electrical outlet.
- Adjusting Light Angle: The light head can be adjusted to direct the beam. Loosen the plastic knob adjustment screws located on either side of the light head. Adjust the light to the desired angle, then tighten the knobs securely to lock the position.
- Portability: Use the plastic handle to safely transport the light when it is cool. The yellow frame also serves as a stable base.
Video 1: An overview of the Woods Portable Work Light, demonstrating its features including the adjustable head, protective cage, handle, and grounded plug. The video also shows the light in operation, illuminating a room.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your work light.
- Cleaning: Ensure the light is unplugged and completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Bulb Replacement: If the halogen bulb burns out, ensure the light is unplugged and cool. Carefully remove the protective grill and the old bulb. Insert a new 500W quartz halogen bulb, handling it with a clean cloth or gloves to avoid skin oils. Reattach the protective grill securely.
- Cord Inspection: Periodically inspect the power cord for any cuts, fraying, or damage. Do not use the light if the cord is damaged.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to outlet; Bulb is burnt out; Damaged power cord | Check power source/breaker; Replace bulb (see Maintenance); Inspect and replace power cord if damaged (contact qualified electrician) |
| Light flickers | Loose bulb connection; Faulty bulb; Unstable power supply | Ensure bulb is seated correctly; Replace bulb; Check power outlet/circuit |
| Excessive heat | Normal operation for halogen lights; Insufficient ventilation | Ensure proper clearance from surfaces; Do not cover the light; Allow adequate cooling time |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Woods |
| Model Number | L20 |
| Light Type | Halogen |
| Wattage | 500 watts |
| Voltage | 120 Volts |
| Brightness | 7000 lumens |
| Material | Metal |
| Color | Yellow |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Special Feature | Tempered-Glass |
| Item Weight | 3.1 pounds |
| Product Dimensions | 8"W x 85"H (Note: 85"H seems like a typo in source, likely 8.5"H or similar) |
| Certifications | UL, cUL Listed |
9. Warranty and Support
This Woods 500 Watt Portable Work Light (Model L20) comes with a 1-year limited warranty (excluding the bulb). For warranty claims, technical support, or further assistance, please contact Woods customer service directly. Refer to the product packaging or the official Woods website for current contact information.
