1. Introduction
The Mastercool 53351 Professional UV Leak Detection Kit is designed for technicians to accurately and efficiently locate leaks in various automotive and HVAC systems. This kit utilizes fluorescent dyes and a high-intensity UV light to pinpoint leaks in A/C, coolant, fuel, oil, and automatic transmission fluid (ATF) systems.
This manual provides essential information for the safe and effective use of your leak detection kit. Please read all instructions carefully before operation.

Image 1: Mastercool 53351 Professional UV Leak Detection Kit, showing all included components.
2. Safety Information
WARNING: Always follow safety precautions to prevent injury or damage to equipment.
- Always wear the provided UV-enhancing safety glasses and appropriate gloves when handling fluorescent dyes and operating the UV light.
- Avoid direct exposure of eyes and skin to the UV light.
- Do not operate the UV light without proper eye protection.
- The UV light lens can become hot during use. Avoid touching it to prevent burns.
- Ensure proper ventilation when working with refrigerants and other automotive fluids.
- Purge air from the dye injector hose assembly prior to first use to prevent air from entering the system.
- Refer to vehicle manufacturer's service manual for specific fluid capacities and procedures.
3. Kit Contents
The Mastercool 53351 kit includes the following components:
- High-Intensity Mini UV Light (12V / 50W equivalent)
- 1 oz Universal Fluorescent Dye Cartridge (for oil-based systems, 10 applications)
- Refillable Oil/Dye Injector Hose Assembly
- R134a Coupler
- R12 Adapter
- 1 oz Engine Coolant Dye
- 4 oz Dye Remover
- UV-Enhancing Safety Glasses
- 25 Service Information Labels
- Durable Molded Carrying Case

Image 2: All components of the Mastercool 53351 kit, highlighting its all-in-one capability for various automotive systems.
4. Setup
4.1 UV Light Preparation
- Ensure the 12V UV light is connected to a suitable 12V power source (e.g., vehicle battery) using the provided clamps.
- Verify the light is functioning correctly before proceeding.
4.2 Dye Injector Preparation
- Select the appropriate fluorescent dye for the system you are testing (e.g., universal fluorescent dye for oil-based systems, engine coolant dye for cooling systems).
- Load the dye into the refillable oil/dye injector hose assembly.
- Attach the correct coupler (R134a or R12 adapter) to the injector hose assembly, if testing an A/C system.
- Before connecting to the system, purge any air from the injector hose by slightly opening the valve and allowing a small amount of dye to escape. This prevents air from entering the system.

Image 3: The 12V UV light and dye injector with R134a hose and R12 adapter, demonstrating industry-compatible design.
5. Operating Instructions
5.1 Dye Injection
- Wear UV-enhancing safety glasses and gloves.
- For A/C systems: Connect the dye injector to the low-side service port of the A/C system. Follow the vehicle manufacturer's instructions for proper dye injection.
- For other fluid systems (engine oil, transmission, power steering, fuel, coolant): Add the appropriate fluorescent dye directly into the fluid reservoir. Refer to the dye packaging for recommended dosage.
- Allow the system to operate for a sufficient period (e.g., 15-30 minutes for A/C, or longer for other systems as recommended by dye instructions) to ensure the dye circulates throughout the system.
5.2 Leak Detection
- Ensure the area is as dark as possible for optimal visibility of the fluorescent dye.
- Activate the 12V high-intensity UV light.
- Systematically scan all components, hoses, and connections of the suspected system with the UV light.
- Leaks will appear as a bright, glowing fluorescent yellow or green area under the UV light.
- Once a leak is identified, mark its location for repair.

Image 4: Using the high-intensity 12V UV light to detect fluorescent dye at a leak point in an engine bay.
5.3 Video Demonstration
Watch this official Mastercool video for a visual guide on using the UV Leak Detection Kit:
Video 1: Official Mastercool demonstration of the 53351 UV Leak Detection Kit in action.
6. Maintenance
6.1 Cleaning
- After detecting leaks, use the provided 4 oz dye remover to clean any visible fluorescent dye from components.
- Wipe down the UV light and injector assembly with a clean cloth.
- Clean safety glasses with a soft cloth.
6.2 Storage
- Store all kit components in the durable molded carrying case when not in use.
- Keep the kit in a cool, dry place away from direct sunlight and extreme temperatures.

Image 5: Essential accessories for the kit, including dye remover and UV safety glasses.
7. Troubleshooting
- Dye not visible under UV light:
- Ensure the area is sufficiently dark. Ambient light can diminish fluorescence.
- Verify the UV light is functioning correctly and is adequately powered.
- Confirm the correct type of dye was used for the fluid system.
- Allow more time for the dye to circulate throughout the system.
- Dye injector not working properly:
- Check for blockages in the injector hose or valve.
- Ensure the dye cartridge is correctly installed and not empty.
- Verify the system pressure is within the acceptable range for dye injection.
- UV light not turning on:
- Check the 12V power connection and ensure it is secure.
- Inspect the power cable for any damage.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Mastercool |
| Model Number | 53351-B |
| Item Weight | 2.2 pounds |
| Product Dimensions | 9.75 x 6.75 x 3.25 inches |
| UV Light Power | 12V / 50W equivalent |
| Dye Compatibility | Universal (oil-based), Engine Coolant |
| A/C System Compatibility | R134a, R12 |
9. Warranty and Support
Mastercool products are built for professional-grade performance. For warranty information, technical assistance, or support, please contact Mastercool's U.S.-based customer service team. Refer to the product packaging or Mastercool's official website for the most current contact details.