Intex 58924NP

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Intex Sunset Glow Baby Pool (Model 58924NP) Instruction Manual

Model: 58924NP | Brand: Intex

1. Important Safety Information

Please read and understand all instructions and warnings before assembling and using this product. Failure to follow these instructions may result in serious injury or drowning.

  • WARNING: Children have drowned in portable swimming pools. Ensure active adult supervision at all times.
  • WARNING: Empty the pool when not in use to prevent children from gaining unauthorized access and drowning.
  • WARNING: No diving or jumping in shallow water.
  • Assemble and disassemble by adults only.
  • Never place the pool in another body of water.
  • Always ensure the pool is placed on a level, stable surface.

2. Product Components

The Intex Sunset Glow Baby Pool includes the following components:

  • Inflatable pool with three colored rings (pink, yellow, green).
  • Inflatable bottom for added comfort.
Intex Sunset Glow Baby Pool, showing its three colorful inflatable rings and soft blue inflatable bottom.

Figure 1: Intex Sunset Glow Baby Pool

3. Setup Instructions

Follow these steps to properly set up your Intex Sunset Glow Baby Pool:

  1. Unpack and Inspect: Carefully remove the pool from its packaging. Unfold it and lay it flat on a clean, level surface, free from sharp objects. Inspect for any damage or punctures.
  2. Inflate the Bottom: Locate the inflation valve on the bottom of the pool. Inflate this section first until it is firm but not over-inflated. This creates the soft, cushioned floor.
  3. Inflate the Rings: Locate the separate inflation valves for each of the three colored rings (green, yellow, pink). Inflate each ring individually, starting from the bottom (green) and working your way up (yellow, then pink). Inflate until each ring is firm to the touch but still has some give. Do not over-inflate.
Close-up of the Intex Sunset Glow Baby Pool showing the inflation valves on each ring and the soft inflatable bottom.

Figure 2: Inflation Valves and Soft Bottom

  1. Fill with Water: Once fully inflated, begin filling the pool with water. The pool is designed to hold approximately 22 gallons of water, with walls allowing for up to 6.5 inches of water depth.
  2. Check for Leaks: After filling, observe the pool for any signs of leaks. If a leak is detected, refer to the Troubleshooting section.

4. Operating Instructions

The Intex Sunset Glow Baby Pool is designed for safe water play for children aged 12 months to 3 years. Always ensure active adult supervision.

  • Ensure the pool is placed on a stable, level surface away from any hazards.
  • Fill the pool with a suitable amount of water, typically up to 6.5 inches, to allow for comfortable and safe play.
  • Always supervise children closely while they are in or near the pool. Never leave a child unattended.
  • The soft inflatable floor provides a comfortable and safe play area for your child.
A child playing in the Intex Sunset Glow Baby Pool with an adult supervising nearby.

Figure 3: Supervised Play in the Pool

5. Maintenance

Proper maintenance will extend the life of your baby pool.

  • Cleaning: Regularly empty and clean the pool with mild soap and water. Rinse thoroughly and allow to air dry completely before storage.
  • Deflation: To deflate, open all air valves. Gently press on the pool to release air.
  • Storage: Once completely dry and deflated, fold the pool neatly and store it in a cool, dry place away from direct sunlight and sharp objects.

6. Troubleshooting

This section addresses common issues you might encounter with your baby pool.

  • Pool does not hold air: Check all inflation valves to ensure they are securely closed. Inspect the entire surface of the pool for any punctures or small holes. A repair patch (not included) may be used for minor punctures.
  • Water drains too quickly: Ensure the drain plug (if applicable, though this model typically does not have one) is securely closed. Check for any unnoticed punctures.

7. Specifications

Detailed specifications for the Intex Sunset Glow Baby Pool (Model 58924NP).

FeatureDetail
BrandIntex
Model Number58924NP
Product Dimensions33.86"L x 33.86"W x 9.84"H
ShapeRound
MaterialVinyl
Water Capacity22 Gallons
Recommended Age12 months - 3 years
Included ComponentsInflatable bottom, Three coloured tubes
Item Weight0.039 ounces (approx. 1.1 grams)
Assembly RequiredNo (Inflation required)

8. Warranty and Support

Specific warranty information for the Intex Sunset Glow Baby Pool (Model 58924NP) is not provided in the product details. For any product support, warranty claims, or further assistance, please visit the official Intex website or contact their customer service directly.

You can find more information and contact details on the Intex Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.