1. Introduction
This manual provides essential information for the proper use and care of your HEWLETT PACKARD CR52020CB CD-R 20PK Spindle. These CD-R discs are designed for reliable data and audio recording, offering 700MB of storage capacity or 80 minutes of audio recording time, with a maximum write speed of 52x. Please read this manual thoroughly to ensure optimal performance and longevity of your discs.
2. Setup
The HEWLETT PACKARD CR52020CB CD-R discs come in a convenient 20-pack spindle. No complex setup is required for the discs themselves, but proper handling and preparation are crucial before use.
2.1 Unpacking the Spindle
- Carefully remove the spindle from its packaging.
- Twist the clear top cover counter-clockwise to unlock and remove it from the spindle base.
- Remove one CD-R disc at a time, holding it by the edges or the center hole to avoid touching the recording surface.

Image: A stack of 20 HP CD-R discs in their original spindle packaging. The discs feature a blue and white label with 'hp CD-R', '52x', '700 MB Data', and '80 min Music' printed on them. The clear plastic lid is visible on top.
2.2 Preparing for Use
- Ensure your CD/DVD burner drive is clean and functioning correctly.
- Have appropriate CD burning software installed on your computer.
- Verify that the disc is free from dust, fingerprints, or scratches before insertion.
3. Operating Instructions
These CD-R discs are designed for one-time recording of data or audio. Once recorded, the data cannot be erased or overwritten.
3.1 Inserting a CD-R Disc
- Gently slide the CD-R disc into the disc tray of your compatible CD/DVD burner drive, ensuring the label side is facing up.
- Close the disc tray. Your computer's operating system or burning software should detect the blank disc.
3.2 Recording Data
- Open your preferred CD burning software (e.g., Windows Media Player, Nero, Roxio).
- Select the option to create a new data CD.
- Drag and drop the files you wish to burn onto the disc into the software's interface. Ensure the total size does not exceed 700MB.
- Initiate the burning process. The discs support a maximum write speed of 52x, but using a slightly lower speed can sometimes improve recording reliability.
- Once burning is complete, the software may prompt you to finalize the disc. Finalization is recommended for the disc to be readable on other devices.
3.3 Recording Audio
- Open your audio burning software.
- Select the option to create an audio CD.
- Add the audio tracks you wish to burn. The disc can hold approximately 80 minutes of standard audio.
- Start the burning process.
- Finalize the disc after burning to ensure it can be played on standard CD players.
4. Maintenance and Storage
Proper care and storage will help preserve the integrity of your recorded data and the lifespan of your discs.
4.1 Handling
- Always hold discs by their outer edges or by placing a finger through the center hole.
- Avoid touching the shiny, recording surface of the disc, as fingerprints can interfere with data readability.
4.2 Cleaning
- If a disc becomes dirty, gently wipe it with a soft, lint-free cloth.
- Wipe from the center of the disc outwards in a straight line, not in a circular motion.
- Do not use abrasive cleaners or solvents.
4.3 Storage
- Store discs in their original spindle, jewel cases, or protective sleeves to prevent scratches and exposure to dust.
- Keep discs in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
4.4 Labeling
- Use a permanent, felt-tip marker specifically designed for optical media to write on the label side of the disc.
- Avoid using ballpoint pens or sharp objects, as they can damage the disc's data layer.
5. Troubleshooting
If you encounter issues with your CD-R discs, consider the following common solutions:
- Disc Not Recognized:
- Ensure the disc is inserted correctly into the drive.
- Verify that your optical drive is compatible with CD-R media.
- Check the disc for any visible damage, dirt, or fingerprints. Clean if necessary.
- Burning Errors or Failed Recordings:
- Try reducing the write speed in your burning software. While rated for 52x, slower speeds can sometimes be more reliable.
- Ensure you have sufficient free space on your hard drive for temporary files during the burning process.
- Update your optical drive's firmware and your burning software to the latest versions.
- Use a different blank disc, as some discs may have manufacturing defects.
- Playback Issues on Other Devices:
- Confirm that the disc was properly finalized after burning. Unfinalized discs may not be readable by all players.
- Ensure the playback device (e.g., car stereo, standalone CD player) is compatible with CD-R media.
- Clean the disc and check for scratches.
6. Specifications
The following table details the technical specifications for the HEWLETT PACKARD CR52020CB CD-R discs:
| Feature | Specification |
|---|---|
| Product Type | CD-R (Compact Disc Recordable) |
| Storage Capacity | 700 MB (Data) / 80 Minutes (Audio) |
| Maximum Write Speed | 52x |
| Quantity | 20 discs per spindle |
| Brand | HEWLETT PACKARD |
| Model Number | CR52020CB |
| Product Dimensions | 5.63 x 2.25 x 5.63 inches (Spindle) |
| Item Weight | 11.2 ounces (Spindle) |
| Color | Blue (Label Design) |
| UPC | 637668100430 |
7. Warranty Information
Specific warranty details for the HEWLETT PACKARD CR52020CB CD-R 20PK Spindle are not provided within this product data. For information regarding product warranty, please refer to the product packaging or visit the official HEWLETT PACKARD website.
8. Support Information
Specific customer support contact information for the HEWLETT PACKARD CR52020CB CD-R 20PK Spindle is not provided within this product data. For technical assistance or further inquiries, please visit the official HEWLETT PACKARD support website or consult your product's original documentation.