BLACK+DECKER FC150B InfraWave Speed Cooking Countertop Oven User Manual

Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your BLACK+DECKER FC150B InfraWave Speed Cooking Countertop Oven. This appliance combines the speed of microwave-like cooking with the performance of a traditional oven, utilizing InfraWave technology for instant heat and faster results without preheating.

The oven features a 1500-watt heating system and an intelligent profiling system that adjusts cooking lights based on food type. It includes a control panel with an LCD screen and 52 digital pre-settings for various cooking functions.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock, do not immerse cord, plugs, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer service for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• To disconnect, turn any control to "off," then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Oversize foods or metal utensils must not be inserted in a toaster oven as they may create a fire or risk of electric shock.
• A fire may occur if the oven is covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
• Do not place any of the following materials in the oven: paper, cardboard, plastic, or anything that could burn or melt.
• Do not store any materials, other than manufacturer's recommended accessories, in this oven when not in use.
• Do not cover crumb tray or any part of the oven with metal foil. This will cause overheating of the oven.
• Exercise extreme caution when removing tray or disposing of hot grease.

Package Contents

Verify that all items are present in the packaging:

• BLACK+DECKER FC150B InfraWave Speed Cooking Countertop Oven
• Broil Rack
• Bake Pan
• Removable Crumb Tray
• Instruction Manual

Setup

1. Unpack: Carefully remove all packaging materials and any promotional labels from the oven.
2. Clean: Wipe the exterior of the oven with a damp cloth. Wash the broil rack, bake pan, and crumb tray in warm, soapy water. Rinse and dry thoroughly.
3. Placement: Place the oven on a stable, level, heat-resistant surface. Ensure there is at least 6 inches (15 cm) of clearance on all sides and above the oven for proper ventilation. Do not place the oven directly against a wall or under cabinets.
4. Insert Crumb Tray: Slide the removable crumb tray into the bottom slot of the oven.
5. Power Connection: Plug the power cord into a standard 120V AC electrical outlet.
6. Initial Burn-Off: Before first use, operate the oven empty for approximately 10-15 minutes on a high setting (e.g., Broil) to burn off any manufacturing residues. A slight odor or smoke is normal during this process. Ensure the area is well-ventilated.

Image 1: The BLACK+DECKER FC150B InfraWave Speed Cooking Countertop Oven. This image shows the oven's exterior, including the control panel at the bottom and the glass door.

Operating Instructions

Control Panel Overview

Image 2: Close-up of the BLACK+DECKER FC150B InfraWave Oven's control panel. This image highlights the LCD screen, function buttons (Pizza, Quick Foods, Cookies, Toast, Reheat, Bake & Roast, Broil), and control knobs for speed/time adjustment.

The control panel features an LCD screen and various buttons for selecting cooking functions and adjusting settings. Refer to Image 2 for a visual guide.

• LCD Screen: Displays selected function, cooking time, and other relevant information.
• Function Buttons: Dedicated buttons for common cooking tasks such as Pizza, Quick Foods, Cookies, Toast, Reheat, Bake & Roast, and Broil.
• Speed/Time Adjustment (+/-): Used to increase or decrease cooking time or adjust other parameters.
• SET Button: Confirms selections.
• START/STOP Button: Initiates or cancels a cooking cycle.
• CONVERT Menu: Allows manual entry of temperature and time, which the oven then converts to InfraWave cooking time.
• POWER Button: Turns the oven on or off.

General Operation Steps

1. Prepare Food: Place food on the appropriate accessory (bake pan or broil rack) and insert it into the oven.
2. Close Door: Ensure the oven door is fully closed.
3. Select Function: Press the desired function button (e.g., "Pizza," "Toast," "Bake & Roast"). The LCD screen will display the default settings for that function.
4. Adjust Settings (if needed): Use the "+" or "-" buttons to adjust the cooking time or other parameters as displayed on the LCD screen.
5. Confirm: Press the "SET" button to confirm your selection.
6. Start Cooking: Press the "START/STOP" button to begin the cooking cycle. The InfraWave lights will activate.
7. Monitor: Periodically check food for desired doneness. The oven does not require preheating.
8. Stop Cooking: To stop cooking at any time, press the "START/STOP" button.
9. Remove Food: Carefully remove cooked food using oven mitts.

Using the CONVERT Menu

The CONVERT menu is designed for recipes that specify traditional oven temperatures and times. This feature allows the InfraWave oven to automatically adjust its cooking cycle to achieve similar results.

1. Press the "CONVERT" button.
2. Use the "+" or "-" buttons to enter the desired temperature from your recipe. Press "SET".
3. Use the "+" or "-" buttons to enter the desired cooking time from your recipe. Press "SET".
4. The oven will then display the converted InfraWave cooking time. Press "START/STOP" to begin.

Image 3: The interior of the BLACK+DECKER FC150B InfraWave Oven with the door open. This view shows the wire racks and the heating elements, illustrating the cooking chamber.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your oven.

1. Unplug: Always unplug the oven from the power outlet and allow it to cool completely before cleaning.
2. Crumb Tray: Remove the crumb tray and discard accumulated crumbs. Wash the tray in warm, soapy water, rinse, and dry thoroughly.
3. Accessories: Wash the bake pan and broil rack in warm, soapy water. For stubborn food residue, soak them before washing. Rinse and dry completely.
4. Interior: Wipe the interior walls and glass door with a damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads, as they can damage surfaces.
5. Exterior: Wipe the exterior surfaces with a damp cloth. Do not immerse the oven in water or any other liquid.
6. Heating Elements: Do not attempt to clean the InfraWave heating elements. Any food splatters on the elements will burn off during operation.

Troubleshooting

If you encounter issues with your BLACK+DECKER FC150B oven, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact BLACK+DECKER customer support.

Specifications

• Model: FC150B
• Power: 1500 Watts
• Dimensions: Approximately 17 x 17 x 13 inches
• Item Weight: 15.6 pounds
• Color: Black
• Special Feature: InfraWave Technology
• Control Type: Knob and Digital Buttons
• Door Style: Dropdown Door
• Power Source: Electric
• Manufacturer: Black & Decker

Warranty and Support

This BLACK+DECKER FC150B InfraWave Speed Cooking Countertop Oven is covered by a one-year limited warranty from the date of purchase.

This warranty covers defects in material or workmanship. It does not cover damage resulting from accident, misuse, abuse, commercial use, or unauthorized modification of the product.

For warranty service, technical support, or to order replacement parts, please contact BLACK+DECKER customer service. Keep your original purchase receipt as proof of purchase.

For further assistance, visit the official BLACK+DECKER website or refer to the contact information provided in your warranty documentation.