HOT TOOLS 1130

Hot Tools Pro Artist 24K Gold Marcel Iron 1-1/4 Inch

Model: 1130

1. Introduction and Overview

This manual provides instructions for the safe and effective use of your Hot Tools Pro Artist 24K Gold Marcel Iron, 1-1/4 inch barrel. This professional-grade styling tool is designed for creating long-lasting curls and waves. Please read all instructions before use and retain this manual for future reference.

Hot Tools Pro Artist 24K Gold Marcel Iron, 1-1/4 inch barrel

Image 1.1: The Hot Tools Pro Artist 24K Gold Marcel Iron with its 1-1/4 inch barrel, featuring a gold-plated surface and a black handle with temperature controls.

2. Important Safety Information

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

  • Always unplug the appliance immediately after using.
  • Do not use while bathing or in a shower.
  • Do not place or store appliance where it can fall or be pulled into a tub or sink.
  • Do not place in or drop into water or other liquid.
  • Do not reach for an appliance that has fallen into water. Unplug immediately.
  • This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
  • Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
  • Never use while sleeping.
  • Never drop or insert any object into any opening.
  • Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Do not use an extension cord with this appliance.
  • Do not touch hot surfaces. Use handles or knobs.
  • Allow the appliance to cool completely before storing.
  • This tool is designed for professional use and requires specific handling techniques. Training is recommended for optimal and safe operation.

3. Product Features

  • 24K Gold Plated Barrel: The 1-1/4 inch barrel features a 24K gold plating, which is an excellent heat conductor. This ensures even heat distribution for consistent styling results.
  • Pulse Technology: This proprietary technology ensures the iron gets hot and stays hot. It senses temperature drops and restores heat immediately for consistent styling.
  • Variable Heat Settings: Offers a high heat reach of up to 430°F (221°C), suitable for various hair types from fine to coarse.
  • Locking and Rotating Handles: Engineered for ease of use, these handles allow for smooth rotation and reduced strain during styling.
  • 8ft. Professional Swivel Cord: Provides ample reach and tangle-free movement during use.
  • Foldaway Safety Stand: Integrated stand protects countertops from heat and facilitates convenient storage.
Close-up of the Hot Tools Marcel Iron barrel and temperature dial

Image 3.1: A close-up view of the 24K gold surface barrel and the temperature control dial, indicating heat settings up to 430°F.

Woman with wavy hair demonstrating 24K Gold Technology benefits

Image 3.2: This image illustrates the 24K Gold Technology, highlighting its role in providing fast, even heat to help protect hair from heat damage, shown alongside a woman with healthy, wavy hair.

4. Setup

  1. Unpack the Marcel Iron and remove all packaging materials.
  2. Place the iron on a heat-resistant surface. Ensure the foldaway safety stand is deployed to protect the surface.
  3. Plug the 8ft. professional swivel cord into a standard electrical outlet (120V AC).
  4. The iron is now ready for use.
Diagram showing product dimensions of the Marcel Iron

Image 4.1: A diagram illustrating the product dimensions, showing the overall length of the Marcel Iron is approximately 15 inches (37 cm).

5. Operating Instructions

The Hot Tools Pro Artist 24K Gold Marcel Iron is a professional tool designed without a spring mechanism. This allows for greater control and versatility in styling but requires practice to master. If you are new to Marcel irons, consider practicing with the tool unplugged until you are comfortable with the grip and rotation.

5.1. Temperature Selection

Select the appropriate temperature setting based on your hair type. The iron heats up quickly to the desired temperature.

  • 280°F (138°C): Fine, Straight Hair
  • 330°F (166°C): Thin, Wavy Hair
  • 380°F (193°C): Medium, Wavy Hair
  • 430°F (221°C): Thick, Curly Hair
Chart showing heat settings for different hair types and examples of curl sizes

Image 5.1: This graphic displays recommended heat settings for various hair types, ranging from 280°F for fine hair to 430°F for thick hair. It also shows examples of curl sizes achievable with different barrel diameters, including the 1-1/4 inch barrel for soft curls.

5.2. Curling Technique (Marcel Method)

  1. Ensure hair is clean, dry, and detangled. Apply a heat protectant spray.
  2. Hold the Marcel iron with the thumb and forefinger on the rotating handles.
  3. Open the clamp by pressing the thumb lever. Place a section of hair between the barrel and the clamp, close to the roots.
  4. Rotate the iron away from your face, wrapping the hair around the barrel. The rotating handles allow for a smooth, continuous motion.
  5. Hold for a few seconds (duration depends on hair type and desired curl intensity).
  6. Release the curl by gently opening the clamp and sliding the iron out.
  7. Allow the curl to cool completely before touching or styling to set the shape.

Note: For those unfamiliar with the Marcel technique, a traditional spring-loaded curling iron may be easier to use initially. The Marcel iron offers advanced control for experienced users.

Woman with professionally styled wavy hair

Image 5.2: A woman showcasing professional results with voluminous, wavy hair, demonstrating the potential outcome of using the Marcel Iron.

Woman with soft, natural-looking waves

Image 5.3: A woman with soft, natural-looking waves, illustrating a common styling result achievable with the 1-1/4 inch Marcel Iron.

6. Maintenance and Care

  • Cleaning: Ensure the iron is unplugged and completely cool before cleaning. Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or immerse the iron in water.
  • Storage: Store the iron in a cool, dry place. Ensure the cord is not wrapped tightly around the appliance, as this can cause damage. Utilize the foldaway safety stand for compact storage.
  • Cord Care: Do not pull, twist, or wrap the cord around the appliance. Inspect the cord regularly for any signs of damage.

7. Troubleshooting

ProblemPossible CauseSolution
Iron does not heat up.Not plugged in; power outlet issue; internal fault.Ensure iron is securely plugged into a working outlet. Check circuit breaker. If problem persists, contact customer support.
Curls do not hold.Incorrect temperature setting; hair not properly prepared; curls not cooled.Increase temperature if hair is thick/coarse. Ensure hair is completely dry. Allow curls to cool completely before styling. Use appropriate styling products.
Difficulty with Marcel grip.Lack of practice with spring-free design.Practice the rotating motion with the iron unplugged. Watch instructional videos if available. This technique requires patience and repetition.

8. Specifications

  • Model Number: 1130
  • Barrel Size: 1-1/4 Inch
  • Barrel Material: 24K Gold Plated Iron
  • Maximum Temperature: 430°F (221°C)
  • Cord Length: 8 ft. Professional Swivel Cord
  • Product Dimensions: 14.2 x 2.4 x 5.5 inches
  • Weight: 1.2 Pounds
  • UPC: 078729110317, 078729011300, 882316978606
  • Manufacturer: Helen of Troy

9. Warranty and Support

For warranty information or customer support, please refer to the warranty card included with your product or visit the official Hot Tools website. Keep your purchase receipt as proof of purchase.

For further assistance, you may contact Hot Tools customer service directly. Contact details are typically available on the product packaging or the brand's official website.

© 2023 Hot Tools. All rights reserved.

This manual is for informational purposes only. Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.