Introduction
This manual provides essential instructions for the safe assembly, operation, maintenance, and troubleshooting of your Regalo Hideaway Double Sided Bed Rail Guard. Please read all instructions carefully before use and retain this manual for future reference.
The Regalo Hideaway Double Sided Bed Rail Guard is designed to provide a secure barrier, preventing falls from bed for children transitioning from a crib to an adult-sized bed. Its patented HideAway feature allows the rail to fold down and tuck discreetly under the mattress when not in use, facilitating bed making and sheet changes. This double-sided rail is suitable for beds not placed against a wall and can also be used as a single bed rail if the bed's position is changed.
Package Contents
Verify that all components are present before beginning assembly:
- One (1) Regalo Hideaway Double Sided Bed Rail Guard
- Instruction Manual
- All necessary assembly hardware (pre-attached or within packaging)
Image: The Regalo Hideaway Double Sided Bed Rail Guard in use, providing a secure boundary for a child in bed.
Setup and Assembly
No tools are required for the assembly of the Regalo Hideaway Double Sided Bed Rail Guard. Follow these steps for proper installation:
- Unpack Components: Carefully remove all parts from the packaging. Ensure no components are damaged.
- Position the Rail: Place the bed rail frame on the bed base, ensuring the support bars are positioned under the mattress. The bed rail is designed for use with a mattress and box spring.
- Secure the Rail: The patented Gap Guard system features two braces that hold the bed rail tightly against the opposite side of the mattress. Adjust these braces to ensure a snug fit, preventing any gaps between the rail and the mattress.
- Raise the Rail: Lift the bed rail into its upright position until it locks securely into place. You should hear an audible click.
Image: Detail of the bed rail's locking mechanism, which secures the rail in the upright position.
Important: Ensure the bed rail is firmly secured and there are no gaps between the rail and the mattress to prevent entrapment hazards.
Operating Instructions
The Regalo Hideaway Bed Rail features a convenient mechanism to raise and lower the rail.
- To Raise the Rail: Lift the bed rail upwards until both locking mechanisms engage with an audible click. Verify that the rail is securely locked in the upright position before use.
- To Lower the Rail (HideAway Feature):
- Locate the release buttons/levers on the side of the bed rail, typically near the base.
- Simultaneously press the release buttons/levers and gently push the rail downwards.
- The rail will fold flat and can be tucked between the mattress and box spring, allowing for easy access to the bed for making or changing sheets.
Image: A user demonstrating the process of lowering the bed rail for convenient access.
Image: The bed rail in its lowered position, being tucked discreetly under the mattress.
Care and Maintenance
Regular care will ensure the longevity and proper function of your bed rail.
- Cleaning: The durable mesh nylon fabric can be easily cleaned by wiping with a damp washcloth. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect all parts for wear, damage, or loose connections. Ensure the locking mechanisms operate smoothly and securely.
- Storage: When not in use for extended periods, ensure the bed rail is clean and dry before storing in a cool, dry place.
Troubleshooting
If you encounter issues with your Regalo Hideaway Double Sided Bed Rail Guard, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed rail does not lock securely. | Mechanism obstructed or misaligned. | Ensure no bedding or other items are blocking the locking mechanism. Lift the rail firmly until an audible click is heard. |
| Gaps between rail and mattress. | Improper adjustment of Gap Guard system. | Re-adjust the Gap Guard braces to ensure a tight fit against the mattress. Confirm the mattress is centered on the bed frame. |
| Difficulty lowering the rail. | Release buttons not fully pressed or mechanism stiff. | Ensure both release buttons/levers are fully depressed simultaneously. Apply gentle, even pressure to lower the rail. Regular use can improve smoothness. |
If issues persist, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Regalo |
| Model Number | 6010 HD DS |
| Product Dimensions (per rail) | 43 inches (Width) x 18 inches (Height) |
| Color | White |
| Material | Steel frame, Mesh Nylon fabric |
| Assembly Required | No tools required |
| Safety Certifications | Meets ASTM standards, JPMA certified, PVC- and lead-free |
Warranty Information
The Regalo Hideaway Double Sided Bed Rail Guard is backed by a manufacturer's limited 90-day warranty. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage, contact Regalo customer support.
Customer Support
For assistance with assembly, operation, troubleshooting, or warranty inquiries, please contact Regalo customer support:
- Phone: 952-435-1080
- Email: service@regalo-baby.com
