Introduction
This manual provides detailed instructions for the proper use and care of your Kodak Easyshare Z710 7.1 MP Digital Camera. Please read this manual thoroughly to ensure optimal performance and longevity of your device. The Kodak Easyshare Z710 features a 7.1-megapixel CCD sensor and a 10x optical zoom lens, designed for capturing high-quality images with ease.
Setup
1. Battery Installation
The Kodak Easyshare Z710 requires one CR123A battery for operation. Ensure the battery is inserted with the correct polarity.
- Locate the battery compartment door on the camera body.
- Open the compartment door by sliding or lifting the latch.
- Insert one CR123A battery, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
- Close the battery compartment door securely until it clicks into place.
2. Memory Card Installation
The camera stores images on SD memory cards and includes 32MB of internal memory. For extended storage, an SD card is recommended.
- Locate the memory card slot, typically on the side or bottom of the camera.
- Open the memory card slot cover.
- Insert the SD memory card with the metal contacts facing the correct direction, usually towards the front of the camera, until it clicks into place.
- Close the memory card slot cover securely.
Note: If using a new SD card, the camera may prompt you to format it. Formatting will erase all data on the card, so ensure you back up any important files before proceeding.
3. Initial Power On
After installing the battery and memory card, press the power button to turn on the camera. The LCD screen will illuminate, and the lens will extend.
Operating the Camera

Figure 1: Rear view of the Kodak Easyshare Z710, displaying the LCD screen and various control buttons.
1. Basic Controls
- Power Button: Located on the top of the camera, used to turn the camera on or off.
- Shutter Button: Located on the top, press halfway to focus, fully to capture an image.
- Zoom Lever (W/T): Positioned near the shutter button. Slide towards 'W' for wide-angle (zoom out) and 'T' for telephoto (zoom in).
- Mode Dial: Located on the rear, allows selection of various shooting modes such as AUTO (automatic), SCN (scene modes), P (Program AE), and ASM (Aperture Priority, Shutter Priority, Manual).
- LCD Display: The 2.0-inch screen on the back for framing shots, reviewing images, and navigating menus.
- EVF/LCD Button: Toggles between the electronic viewfinder (EVF) and the LCD screen.
- Share Button: A red button for marking photos for printing, emailing, or uploading to online services when connected to a computer.
- Delete Button: Used to erase selected images or videos.
- Menu Button: Accesses the camera's settings and options.
- Review Button: Enters playback mode to view captured images and videos.
2. Taking Photos
- Turn on the camera using the power button.
- Select your desired shooting mode using the mode dial (e.g., AUTO for general use).
- Frame your shot using the LCD display or electronic viewfinder.
- Use the zoom lever to adjust the 10x optical zoom as needed.
- Press the shutter button halfway down to allow the camera to focus before fully pressing to capture. The focus indicator will confirm when focus is achieved.
- Press the shutter button fully to capture the image.
3. Picture Enhancing Features
The Kodak Easyshare Z710 includes several features to enhance your photos directly on the camera:
- Cropping: Adjust the composition of your photos after capture.
- Live Histogram: View the tonal distribution of your image in real-time for better exposure control.
- Capture Grid Line Display: Helps with composition by overlaying a grid on the LCD screen.
4. Connecting to a Computer
To transfer images and videos to your computer, use the provided USB cable and Kodak EasyShare Software Version 6.0. Install the software on your computer before connecting the camera.
- Ensure Kodak EasyShare Software Version 6.0 is installed on your computer.
- Connect the camera to your computer using a compatible USB cable.
- Turn on the camera. The software should automatically detect the camera and prompt you to import images.
Maintenance
1. Cleaning the Camera
- Lens: Use a soft, lint-free cloth specifically designed for camera lenses. Gently wipe the lens in a circular motion. Avoid using harsh chemicals or abrasive materials.
- Body: Wipe the camera body with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use solvents.
- LCD Screen: Use a soft, dry cloth. For smudges, a specialized LCD screen cleaner can be used sparingly.
2. Battery Care
- Remove the battery if the camera will not be used for an extended period to prevent leakage.
- Store batteries in a cool, dry place.
- Dispose of depleted batteries according to local regulations.
3. Memory Card Handling
- Always turn off the camera before inserting or removing an SD card to prevent data corruption.
- Avoid touching the metal contacts of the memory card.
- Keep memory cards away from strong magnetic fields and extreme temperatures.
Troubleshooting
- Camera does not power on:
- Ensure the CR123A battery is correctly inserted with the proper polarity.
- Check if the battery is depleted and replace it with a fresh one.
- Verify the battery compartment door is securely closed.
- Memory card error or unable to initialize:
- Ensure the SD card is fully inserted into the slot.
- Try formatting the memory card through the camera's menu (Note: This will erase all data).
- Test with a different, known-good SD card to rule out a faulty card.
- Ensure the camera is turned off before inserting or removing the card.
- Images are blurry or out of focus:
- Ensure you press the shutter button halfway to allow the camera to focus before fully pressing to capture.
- Check if the lens is clean and free from smudges or dust.
- In low light conditions, the camera may struggle to focus. Use the flash if appropriate.
- Ensure the subject is within the camera's focusing range.
- LCD screen is blank or not displaying correctly:
- Press the EVF/LCD button to ensure you haven't accidentally switched to the electronic viewfinder.
- Check battery level; a low battery can affect screen performance.
- If the screen is physically damaged, contact support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 8197774 |
| Image Sensor | 7.1 Megapixel CCD |
| Optical Zoom | 10x (Schneider-Kreuznach Variogon Lens) |
| Maximum Focal Length | 380 Millimeters |
| Display | 2.0-inch LCD |
| Image Stabilization | Digital, Optical |
| Storage Media | SD Memory Card (32MB internal memory included) |
| Supported File Format | JPEG |
| Battery Type | 1 x CR123A battery |
| Product Dimensions | 3.86 x 2.87 x 3.07 inches |
| Item Weight | 12.6 ounces |
| Manufacturer | Kodak |
| Date First Available | November 29, 2006 |
Warranty & Support
Warranty Information
This product is covered by a limited manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Note: The legal disclaimer states "All Sales Final". This typically refers to the seller's return policy, not the manufacturer's warranty. For warranty service, contact Kodak directly.
Customer Support
For technical assistance, service, or further inquiries regarding your Kodak Easyshare Z710 camera, please contact Kodak customer support. Contact information can typically be found on the Kodak official website or in the documentation provided with your camera.