1. Product Overview
The ATOMIC AAA 1.5V Ultra Alkaline batteries (Model A-AAA, LR03 AM4) are designed to provide reliable power for a wide range of electronic devices. This package contains 24 individual AAA batteries, offering a convenient and long-lasting power solution.

Image 1.1: A pack of 24 ATOMIC AAA Ultra Alkaline batteries, showcasing the product packaging and individual battery design.
These batteries are suitable for everyday use in various household and personal electronic devices, ensuring consistent performance.
2. Safety Information
Please read and follow these safety guidelines to prevent personal injury and product damage:
- Keep out of reach of children: Small batteries can be swallowed. If swallowed, seek medical attention immediately.
- Do not recharge: These are primary (non-rechargeable) alkaline batteries. Attempting to recharge them can cause leakage, fire, or explosion.
- Do not disassemble or modify: Tampering with batteries can lead to dangerous chemical leaks or explosions.
- Do not expose to heat or fire: High temperatures can cause batteries to leak or explode.
- Do not mix battery types: Avoid mixing new and used batteries, or different brands/types of batteries, as this can cause leakage or reduced performance.
- Insert correctly: Always align the positive (+) and negative (-) terminals according to the device's markings. Incorrect insertion can cause damage.
- Remove depleted batteries: Remove exhausted batteries promptly from devices to prevent leakage and potential damage.
- Store properly: Store batteries in a cool, dry place at room temperature.

Image 2.1: ATOMIC batteries highlighting their composition as 0% Mercury, 0% Uranium, and 0% Cadmium, emphasizing environmental and safety considerations.
3. Installation (Setup)
Follow these steps to correctly install ATOMIC AAA batteries into your device:
- Identify Battery Compartment: Locate the battery compartment on your electronic device. This is often on the back, bottom, or side, secured by a cover or screw.
- Open Compartment: Open the battery compartment cover. If a screw is present, use the appropriate tool to remove it.
- Observe Polarity: Inside the compartment, observe the polarity markings (+ and -). These indicate the correct orientation for battery insertion.
- Insert Batteries: Insert the ATOMIC AAA batteries one by one, ensuring that the positive (+) end of the battery aligns with the positive (+) marking in the compartment, and the negative (-) end aligns with the negative (-) marking.
- Close Compartment: Once all batteries are correctly inserted, replace the battery compartment cover and secure it if necessary.
- Test Device: Power on your device to confirm proper battery installation and functionality.
4. Operation
ATOMIC AAA Ultra Alkaline batteries are designed for straightforward use in compatible devices. Once installed, they will power your device until depleted.
Recommended Uses:
These batteries are ideal for a variety of common household and personal electronics, including but not limited to:
- Clocks
- Gaming Controllers
- Power Tools (low-drain)
- Radios
- Remote Control Vehicles
- TV Remotes
- Flashlights
- Blood Glucose Meters
- Digital Cameras

Image 4.1: Battery powering a flashlight.

Image 4.2: Battery for TV remote control.

Image 4.3: Battery for medical devices.

Image 4.4: Battery for digital cameras.
5. Storage and Disposal (Maintenance)
Storage:
- Store unused batteries in their original packaging in a cool, dry place at normal room temperature.
- Avoid storing batteries in direct sunlight, high humidity, or extreme temperatures.
- Do not store batteries loosely in a drawer with metal objects (like coins or keys) as this can cause a short circuit.
- These batteries have a long shelf life, typically up to seven years, when stored correctly.

Image 5.1: ATOMIC batteries highlighting their seven-year shelf life and outstanding performance.
Disposal:
Proper disposal of alkaline batteries is important for environmental protection. While alkaline batteries are generally considered non-hazardous in many regions, it is recommended to:
- Check local regulations for battery recycling and disposal.
- Many communities offer recycling programs for batteries.
- Do not dispose of batteries in household trash where they might end up in landfills.
6. Troubleshooting
If your device is not functioning correctly after installing ATOMIC AAA batteries, consider the following:
- Check Polarity: Ensure that the batteries are inserted with the correct positive (+) and negative (-) orientation as indicated in the device's battery compartment.
- Verify Battery Contact: Make sure the battery terminals are clean and making proper contact with the device's contacts. Gently clean contacts with a dry cloth if necessary.
- Test Batteries: If possible, test the batteries with a battery tester to confirm they are not depleted.
- Try New Batteries: Replace the batteries with a fresh set of ATOMIC AAA batteries to rule out a faulty battery.
- Check Device: If the issue persists, the problem may lie with the device itself. Refer to your device's instruction manual for further troubleshooting.
7. Specifications
Detailed technical specifications for ATOMIC AAA Ultra Alkaline Batteries:

Image 7.1: Visual representation of ATOMIC AAA battery dimensions and electrical specifications.
| Specification | Value |
|---|---|
| Battery Type | AAA (LR03 AM4) |
| Battery Cell Composition | Alkaline |
| Nominal Voltage | 1.5 Volts |
| Product Dimensions (per battery) | Diameter: 10.5 mm, Length: 44.5 mm |
| Item Weight (per battery) | 11.5 grams (0.41 ounces) |
| Model Number | A-AAA |
| Number of Batteries per Pack | 24 |
| Manufacturer | Atomic Energy U.S.A. |
| Date First Available | October 2, 2001 |
| Mercury, Cadmium, Uranium Content | 0% |
| Shelf Life | Up to 7 years (under optimal storage conditions) |
8. Warranty and Support
For information regarding product warranty or customer support, please refer to the contact details provided on the product packaging or visit the official ATOMIC website. Keep your purchase receipt as proof of purchase.