1. Product Overview
The DELTA RP5834 is a 1/2-inch chrome tub spout designed for use in bathrooms. This model features a pull-up diverter to direct water flow from the tub spout to the shower head. Its construction is primarily plastic with a tarnish-resistant chrome finish, ensuring durability and aesthetic appeal.
Key Features:
- Plastic construction for reliable performance.
- Integrated pull-up diverter for shower activation.
- Overall length of 5 1/2 inches.
- Tarnish-resistant chrome finish.
- Compatible with 1/2-inch Copper Water Tube (CWT) sweat connections or 1/2-inch Iron Pipe Size (IPS) threaded connections.
Image 1.1: DELTA RP5834 1/2-inch Chrome Tub Spout. This image displays the complete tub spout with its chrome finish and pull-up diverter mechanism.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before beginning any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not overtighten connections, as this can damage the product or plumbing.
3. Package Contents
Verify that all components are present before beginning installation:
- DELTA RP5834 Tub Spout (1)
- Mounting Hardware (e.g., set screw, adapter for threaded connections) (1 set)
- Instructional Guide (1)
4. Setup and Installation
This tub spout can be installed using either a sweat connection onto a 1/2-inch Copper Water Tube (CWT) or a threaded connection onto a 1/2-inch Iron Pipe Size (IPS) pipe. Refer to the included instructional guide for detailed, step-by-step installation procedures specific to your plumbing type.
General Installation Steps:
- Turn off Water Supply: Locate and turn off the main water supply to your bathroom or entire home.
- Remove Old Spout: Depending on the existing spout type, this may involve loosening a set screw, unscrewing the spout, or cutting a sweat-fit connection.
- Prepare Pipe: Clean the existing pipe stub. For threaded connections, ensure threads are clean and apply plumber's tape or thread sealant. For sweat connections, ensure the pipe is clean and properly prepared for soldering.
- Install New Spout:
- Threaded Installation: If using the threaded adapter, ensure it is securely attached to the pipe stub. Then, screw the new tub spout onto the adapter until snug.
- Sweat Installation: Slide the tub spout onto the copper pipe stub. Solder the connection according to standard plumbing practices.
- Secure Spout: If applicable, tighten the set screw on the underside of the spout to secure it to the pipe.
- Test for Leaks: Slowly turn the water supply back on and check for any leaks around the new spout connection.
Note: Some installations may require a brass adapter piece, which is often included with the new unit. Ensure proper alignment and sealing for a leak-free connection.
5. Operation
The DELTA RP5834 tub spout features a simple pull-up diverter for switching between tub fill and shower mode.
- To Fill Tub: Allow water to flow freely from the tub spout.
- To Use Shower: Pull the knob or lever on top of the tub spout upwards. This will divert the water flow to the shower head.
- To Return to Tub Fill: Push the knob or lever back down. The diverter will automatically return to the tub fill position when the water is turned off.
6. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your DELTA tub spout.
- Cleaning: Clean the chrome finish regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Avoid Abrasives: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the tarnish-resistant finish and plastic construction.
- Diverter Care: If the diverter mechanism becomes stiff, ensure it is clean and free of mineral buildup. Avoid forcing the mechanism.
7. Troubleshooting
If you encounter issues with your tub spout, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from spout when shower is on. | Diverter not fully engaged or worn. | Ensure diverter is pulled up completely. If issue persists, the diverter may need replacement. |
| Spout is loose. | Set screw is loose or connection is not secure. | Tighten the set screw on the underside of the spout. For threaded connections, ensure the adapter and spout are securely tightened. |
| Low water flow from spout. | Partial blockage or water pressure issue. | Check for debris inside the spout. Ensure main water supply is fully open. Consult a plumber if water pressure is generally low. |
8. Specifications
| Brand: | DELTA |
| Model Number: | RP5834 |
| Material: | Plastic |
| Finish: | Chrome |
| Spout Design: | Pull-up diverter |
| Spout Height: | 5.5 Inches |
| Spout Reach: | 5.5 Inches |
| Mounting Type: | Wall Mount |
| Connection Type: | 1/2" CWT (Sweat) or 1/2" IPS (Threaded) |
| Item Weight: | 227 Grams |
| Dimensions: | 5-5/8" x 2-1/2" |
9. Warranty and Support
Warranty Information:
This DELTA product is covered by a Lifetime Faucet and Finish Lifetime Limited Warranty to the original consumer. This warranty covers defects in material and manufacturing workmanship. Please refer to the official DELTA warranty documentation for full terms and conditions.
Customer Support:
For technical assistance, replacement parts, or warranty claims, please contact DELTA customer support. Contact information can typically be found on the DELTA official website or in the packaging materials.