Introduction
The Stander HandyBar is a portable vehicle support handle designed to provide stability and assistance when entering or exiting a vehicle. It is compatible with most vehicles and requires no modifications for installation. Beyond its primary function as a mobility aid, the HandyBar also incorporates essential emergency safety tools.
Figure 1: The Stander HandyBar, a portable vehicle support handle.
Safety Information
Please read and understand all safety information before using the Stander HandyBar.
- The HandyBar is designed to provide support and leverage. It is not intended to bear the full weight of an individual for extended periods.
- Ensure the HandyBar is securely inserted into the U-shaped door striker or latch before applying weight.
- Always test the stability of the HandyBar before relying on it for full support.
- Keep the seat belt cutter and window breaker away from children.
- The product is Latex Free.
- Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Product Components
The Stander HandyBar consists of the following key components:
- Ergonomic Non-Slip Grip Handle: Provides a comfortable and secure hold.
- U-Shaped Metal Insert: Designed to fit into the vehicle's door striker or latch.
- Window Breaker: A pointed tip for emergency glass breaking.
- Seat Belt Cutter: A protected blade for emergency seat belt cutting.
Figure 2: Key features of the Stander HandyBar, including the glass breaker, seat belt cutter, and ergonomic grip.
Setup
The Stander HandyBar requires no assembly or permanent installation. It is designed for immediate use.
- Locate the Door Striker: Open your vehicle's door. The door striker is the U-shaped metal latch located on the vehicle's frame, typically near the seat belt anchor.
- Insert the HandyBar: Firmly insert the metal U-shaped end of the HandyBar into the door striker. Ensure it is seated securely and parallel to the vehicle.
- Verify Stability: Before applying full weight, gently test the HandyBar to confirm it is stable and does not wobble.
Figure 3: The HandyBar easily fits into the U-shaped door latch of most vehicles, requiring no modifications.
Operating Instructions
Using for Vehicle Entry/Exit
The HandyBar provides leverage and support for individuals needing assistance with mobility, such as the elderly, those recovering from injury, or individuals with limited mobility.
- For Exiting:
- Open the vehicle door and securely insert the HandyBar into the door striker.
- Grasp the non-slip grip handle firmly.
- Use the HandyBar to push up and out of the vehicle seat, transferring your weight to the handle for stability.
- For Entering:
- Open the vehicle door and securely insert the HandyBar into the door striker.
- Grasp the non-slip grip handle firmly.
- Use the HandyBar to lower yourself into the vehicle seat with control and stability.
Figure 4: The HandyBar assists users in safely entering and exiting vehicles, promoting independence.
Figure 5: The HandyBar is designed to support up to 350 pounds, providing robust assistance.
Using Emergency Safety Tools
The Stander HandyBar includes a built-in window breaker and seat belt cutter for emergency situations.
- Window Breaker: In an emergency where the vehicle's window needs to be broken (e.g., submerged vehicle, electrical failure), use the pointed metal tip of the HandyBar to strike a corner of the side window. Apply firm, direct pressure.
- Seat Belt Cutter: In an emergency where the seat belt needs to be cut (e.g., jammed buckle), locate the protected blade within the handle. Slide the seat belt into the cutter's slot and pull to sever the belt. The blade is designed to be recessed for safety during normal handling.
Video 1: Official demonstration of the Stander HandyBar's features, including its use for vehicle entry/exit and emergency tools.
Maintenance
To ensure the longevity and proper function of your Stander HandyBar, follow these simple maintenance guidelines:
- Cleaning: Wipe the HandyBar with a damp cloth as needed to remove dirt or debris. Avoid abrasive cleaners that could damage the finish or grip.
- Inspection: Periodically inspect the metal insert for any signs of wear, bending, or damage. Ensure the seat belt cutter blade is clear of obstructions.
- Storage: Store the HandyBar in a convenient and accessible location within your vehicle, such as the glove compartment or door pocket.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| HandyBar feels unstable when inserted. | Not fully seated in the door striker; incorrect angle. | Ensure the metal insert is fully and firmly seated into the U-shaped door striker. Adjust the angle until it feels secure. |
| Difficulty using the seat belt cutter. | Seat belt not properly positioned; debris in cutter slot. | Ensure the seat belt is fully inserted into the cutter's slot. Check for and remove any debris. Apply firm, consistent pressure. |
| HandyBar does not fit my vehicle. | Vehicle door striker design incompatibility. | The HandyBar is designed to fit most U-shaped door strikers. If it does not fit, it may not be compatible with your specific vehicle model. Consult the manufacturer's support. |
Specifications
- Model: 3001
- Brand: Stander
- Dimensions (Product): Approximately 9 inches (L) x 2.75 inches (W) x 1.5 inches (H)
- Weight: 0.75 Pounds (12 ounces)
- Weight Capacity: Supports up to 350 lbs
- Material: Durable plastic grip with a strong metal insert.
- Features: Vehicle support handle, window breaker, seat belt cutter.
- Country of Origin: China
- Manufacturer: Standers
Figure 6: Detailed product dimensions of the Stander HandyBar.
Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact Stander customer service directly. Refer to the product packaging or the official Stander website for the most current contact details.
Manufacturer: Standers
Brand Store: Stander Amazon Store
