HOT TOOLS 1105

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Hot Tools Professional Marcel Curling Iron

Model: 1105 | Brand: HOT TOOLS

1. Introduction

Thank you for choosing the Hot Tools 3/4 inch Professional Marcel Curling Iron. This manual provides essential information for the safe and effective use of your new curling iron. Please read it thoroughly before operation and retain it for future reference.

The Hot Tools 3/4 inch 24K Gold Marcel Curling Iron is designed to create beautiful, long-lasting defined hairstyles. It features advanced Pulse Technology to ensure consistent heat and quick recovery, reducing styling time and enhancing hair shine.

Hot Tools 3/4 inch Professional Marcel Curling Iron

Image 1.1: The Hot Tools 3/4 inch Professional Marcel Curling Iron, showcasing its gold barrel and black handle.

2. Safety Information

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

  • Burn Hazard: Surfaces get extremely hot during use. Avoid direct contact with skin, especially the scalp, ears, and neck.
  • Electric Shock Risk: Keep away from water. Do not use near bathtubs, sinks, showers, or other water sources. If the appliance falls into water, unplug it immediately. Do not reach into the water.
  • Fire Risk: Unplug the appliance immediately after use and when not in use. Do not leave it unattended when plugged in. Ensure the appliance is placed on a heat-resistant surface when hot.
  • Children: Keep out of reach of children. This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless supervised.
  • Do not wrap the cord around the appliance.
  • Inspect the cord regularly for damage. Do not use if the cord or plug is damaged.

3. Product Features

The Hot Tools Professional Marcel Curling Iron is engineered with advanced features for superior styling performance:

  • 24K Gold Barrel Surface: Ensures even heat distribution and consistent results for beautiful curls.
  • Pulse Technology: "Gets Hot...Stays Hot" system quickly diagnoses heat loss and restores it to the heating surface, maintaining consistent styling temperature.
  • Fast Heat-Up: Rapid heating allows for quick styling.
  • Rheostat Control Dial: Provides variable heat settings up to 430°F (220°C) for precise temperature control suitable for various hair types.
  • Locking/Rotating Main and Marcel Handles: Offers flexibility and control during styling.
  • Touch Guard Protector: Designed for easier handling, especially when working close to the neck and face.
  • Soft Touch Handle: Provides a comfortable and secure grip.
  • Separate On/Off Switch: For convenient power control.
  • "On" Indicator Light: Visually confirms when the iron is powered on.
  • Foldaway Safety Stand: Allows for safe placement of the hot iron on surfaces.
  • 8 ft. Professional Swivel Cord: Provides tangle-free operation and extended reach.
Close-up of Hot Tools curling iron showing 24K gold surface and temperature dial

Image 3.1: Close-up view highlighting the 24K gold barrel surface and the rheostat control dial with temperature settings.

4. Setup

  1. Unpack: Carefully remove the curling iron from its packaging. Retain packaging for storage or future transport.
  2. Inspect: Check the curling iron and power cord for any signs of damage. Do not use if damaged.
  3. Placement: Place the curling iron on a flat, heat-resistant surface, ensuring the foldaway safety stand is deployed.
  4. Power Connection: Plug the 8 ft. professional swivel cord into a standard electrical outlet (110-120V AC).

5. Operating Instructions

Follow these steps to achieve optimal curling results:

  1. Prepare Hair: Ensure hair is clean, dry, and detangled. For best results, apply a heat protectant spray.
  2. Power On: Turn on the curling iron using the separate On/Off switch. The "On" indicator light will illuminate.
  3. Set Temperature: Use the rheostat control dial to select your desired heat setting. Start with a lower temperature for fine or damaged hair and increase as needed for thicker or coarser hair, up to 430°F. Allow the iron to heat up completely.
  4. Section Hair: Create a section of hair to curl. The smaller the section, the tighter the curl. The larger the section, the looser the curl.
  5. Position Iron: Open the clamp of your curling iron. Place the iron toward the root of your hair section, with the hair positioned between the open clamp and the barrel. Be careful to avoid contact with the scalp or skin.
  6. Close and Slide: Lightly close the clamp, then slide it down the section of hair until it reaches the very end. Fully close the clamp.
  7. Twist and Wrap: Twist your curling iron upwards towards your roots, wrapping the hair smoothly around the barrel. Hold for a few seconds (typically 5-10 seconds, depending on hair type and desired curl intensity).
  8. Release Curl: Gently open the clamp and release the curl. Allow the curl to cool completely before styling or brushing to set the curl.
  9. Repeat: Continue sectioning and curling hair until your desired style is achieved.
  10. Power Off: Once finished, turn off the curling iron using the On/Off switch and unplug it from the electrical outlet.

6. Maintenance

Proper maintenance ensures the longevity and performance of your Hot Tools curling iron:

  • Cleaning: Ensure the curling iron is unplugged and completely cool before cleaning. Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
  • Storage: Store the curling iron in a cool, dry place. Do not wrap the power cord tightly around the appliance, as this can damage the cord.
  • Cord Care: Avoid twisting or kinking the power cord. Do not pull on the cord to unplug the appliance; always grasp the plug.

7. Troubleshooting

ProblemPossible CauseSolution
Iron does not heat up.Not plugged in; power switch off; faulty outlet.Ensure plug is fully inserted; turn power switch ON; test outlet with another appliance.
Curls do not hold.Temperature too low; hair not fully dry; sections too large; curl not cooled.Increase temperature setting; ensure hair is completely dry; use smaller sections; allow curls to cool before brushing.
Iron is too hot.Temperature setting too high for hair type.Adjust rheostat dial to a lower temperature setting.

8. Specifications

  • Model Number: 1105
  • Barrel Size: 3/4 inch
  • Barrel Material: 24K Gold Plated
  • Maximum Temperature: Up to 430°F (220°C)
  • Power Cord: 8 ft. Professional Swivel Cord
  • Product Dimensions: 0.79 x 1.18 x 2.76 inches
  • Weight: 3.2 ounces
  • UPC: 078729011058
  • Manufacturer: Hot Tools

9. Warranty and Support

For warranty information and customer support, please refer to the official Hot Tools website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, visit the HOT TOOLS Store on Amazon.

© 2025 HOT TOOLS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.