Introduction
This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your De'Longhi TRN0812T Portable Oil-Filled Radiator. Please read all instructions carefully before using the appliance and retain this manual for future reference.

Figure 1: De'Longhi TRN0812T Portable Oil-Filled Radiator.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this heater.
- Do not use this heater in bathrooms, laundry areas, or similar indoor locations with water.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- The heater is equipped with a GFI (Ground Fault Interrupter) plug for safe use in bathrooms. Ensure the GFI plug is functioning correctly before each use.

Figure 2: The GFI plug ensures electrical safety, especially in damp environments.
Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for off-season storage.
- Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, and other objects. Do not place it on soft surfaces like beds or deep carpets where openings may be blocked.
- Power Connection: Plug the heater directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.
- Initial Use: During the first few hours of operation, the heater may emit a slight "new" smell. This is normal and will dissipate quickly. Ensure the room is well-ventilated during initial use.
Operating Instructions
The De'Longhi TRN0812T features user-friendly controls for customized heating.
Controls Overview

Figure 3: Control panel with power switch, thermostat dial, and heat setting dial.
- Power Switch: Turns the heater ON or OFF.
- Thermostat Dial: Adjusts the desired room temperature. Turn clockwise for higher temperatures, counter-clockwise for lower.
- Heat Setting Dial: Selects one of three heat settings:
- LOW: For minimal heat output.
- MID: For moderate heat output.
- HIGH: For maximum heat output (1200 watts).
- Programmable Timer: The 24-hour programmable timer allows you to set specific operating periods. Consult the detailed timer instructions in the full manual for precise programming. It offers up to 96 settings for flexible scheduling.
- Anti-Freeze Setting: This feature automatically turns the heater on if the room temperature drops below 44°F (6°C), preventing pipes from freezing.
General Operation
- Ensure the heater is plugged into a suitable outlet.
- Turn the Power Switch to the ON position. The power indicator light will illuminate.
- Select your desired heat setting (LOW, MID, or HIGH).
- Adjust the Thermostat Dial to your preferred temperature. The heater will cycle on and off to maintain this temperature.
- To use the timer, follow the specific instructions for setting the 24-hour programmable timer.
- When finished, turn the Power Switch to the OFF position and unplug the heater.
Maintenance
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Oil: The unit is permanently sealed with pure diathermic oil and never needs refilling. Any attempt to open the unit will void the warranty and may cause a safety hazard.
- Storage: When not in use, store the heater in a cool, dry place. You can use the integrated cord storage to keep the power cord tidy.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, GFI tripped, or thermostat set too low. | Check power outlet. Press the reset button on the GFI plug. Increase the thermostat setting. |
| Heater emits a strange smell. | New unit "burn-off" smell or dust accumulation. | This is normal for initial use and will dissipate. Clean the heater's exterior to remove dust. |
| Heater overheats and shuts off. | Thermal cut-off activated due to obstruction or malfunction. | Unplug the heater and let it cool. Remove any obstructions. If the problem persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | De'Longhi |
| Model Number | TRN0812T |
| Heating Power | 1200 Watts |
| Voltage | 120 Volts |
| Heat Settings | 3 (Low, Mid, High) |
| Special Features | Noiseless, Portable, Programmable Timer, GFI Plug, Anti-Freeze Setting |
| Product Dimensions | 7"D x 18"W x 15"H |
| Item Weight | 19 pounds |
| Heating Coverage | Up to 144 square feet |

Figure 4: Product dimensions for the De'Longhi TRN0812T radiator.
Warranty & Support
This product comes with a 1-year limited warranty. Please refer to the warranty card included with your purchase for full terms and conditions. Warranty does not cover misuse of the product.
For technical assistance, replacement parts, or general inquiries, please visit the official De'Longhi website or contact their customer service department. Keep your purchase receipt and model number handy for faster service.
Product Videos
No official seller videos are available for this product at this time.