T&G Cork Round Pot Stand / Surface Protector - Model 451 Instruction Manual

Introduction

Welcome to your T&G Cork Round Pot Stand / Surface Protector instruction manual. This product is designed to provide a protective barrier between hot cookware and delicate surfaces, preventing heat damage and scratches. Made from high-quality, FSC certified cork, these stands are naturally anti-slip and resistant to liquids. This manual will guide you through the proper setup, usage, and care to ensure optimal performance and longevity of your pot stands.

Setup

The T&G Cork Round Pot Stands are ready for immediate use upon unboxing. No assembly is required. Simply place the stand on a clean, flat surface where you intend to place hot items.

Image: A T&G cork pot stand protecting a surface from a glass bottle.

Operating Instructions

Place the cork pot stand directly on your table, countertop, or any surface requiring protection. Ensure the surface beneath the stand is clean and dry for optimal grip. Carefully place hot pots, pans, dishes, or serving bowls onto the cork stand. The cork material provides excellent insulation against high temperatures, preventing burns and thermal shock to your surfaces.

Image: T&G cork products in a dining setting, demonstrating their use as surface protectors.

Maintenance

To clean your cork pot stand, wipe it with a damp cloth. For stubborn stains, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Allow the stand to air dry completely before storing or reusing. Do not submerge in water or wash in a dishwasher, as this can damage the cork. Avoid abrasive cleaners or scrubbing pads.

Image: Various T&G cork products, illustrating the material and range.

Troubleshooting

• Issue: Pot stand slips on surface.
  Solution: Ensure both the pot stand and the surface it rests on are clean and dry. Cork is naturally anti-slip, but moisture or debris can reduce its effectiveness.
• Issue: Stains appear on the cork.
  Solution: Cork is highly resistant to stains, but some liquids may leave marks if not cleaned promptly. Refer to the 'Maintenance' section for cleaning instructions. For oil-based stains, a gentle degreaser might be used sparingly, followed by thorough rinsing and drying.

Specifications

Warranty and Support

For product support or warranty inquiries, please contact T&G customer service through their official website or the retailer where the product was purchased. Please have your model number (451) and proof of purchase available when contacting support.