Alessi AMGI01 Mr. Cold Liquid Soap Dispenser User Manual

Introduction and Overview

This manual provides essential information for the safe and effective use of your Alessi AMGI01 Mr. Cold Liquid Soap Dispenser. Designed by Massimo Giacon, this dispenser combines functionality with a distinctive aesthetic, making it a unique addition to any space.

Product Features

• Refillable liquid soap dispenser.
• Constructed from durable thermoplastic resin.
• Unique "Mr. Cold" character design.
• Capacity: Approximately 19.3 fluid ounces (0.57 liters).
• Free from harmful materials: DEHP Free, BPA Free, Mercury Free, Nickle Free, Latex Free, Phthalate Free, Cadmium Free, PVC Free, Lead Free.

Setup

1. Unpacking: Carefully remove all components from the packaging. Ensure no parts are missing or damaged.
2. Placement: Place the dispenser on a stable, flat surface in your desired location, such as a bathroom countertop or kitchen sink area.
3. Filling the Dispenser:
   • Gently twist and lift the top "head" portion of the dispenser to remove it from the base.
   • Pour your preferred liquid soap into the reservoir, ensuring not to overfill. The maximum capacity is 19.3 fl oz (0.57 liters).
   • Replace the top portion, aligning it correctly and twisting gently until secure.

Operating Instructions

The Alessi AMGI01 dispenser is designed for simple operation.

1. Dispensing Soap: Place your hand under the nozzle. Gently press down on the top of the "Mr. Cold" character's head.
2. Amount of Soap: The amount of soap dispensed can be controlled by the pressure and duration of the press.

Maintenance

• Regular Cleaning: Wipe the exterior of the dispenser regularly with a soft, damp cloth and mild soap to remove any soap residue or dust.
• Deep Cleaning: For a more thorough cleaning, disassemble the dispenser by removing the top portion. Rinse both parts with warm water. Ensure all soap residue is removed from the pump mechanism.
• Drying: Allow all parts to air dry completely before reassembling and refilling.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the thermoplastic resin finish.

Troubleshooting

Dispenser Not Pumping Soap

• Check Soap Level: Ensure there is sufficient liquid soap in the reservoir.
• Prime the Pump: If the dispenser is new or has been refilled, it may require several presses to prime the pump and start dispensing soap.
• Clog in Nozzle: Check the nozzle for any dried soap or blockages. Clean with warm water if necessary.

Leaking

• Secure Assembly: Ensure the top portion of the dispenser is correctly aligned and securely twisted onto the base.
• Overfilling: Avoid overfilling the dispenser beyond its recommended capacity.

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Alessi customer service directly. Refer to the official Alessi website or product packaging for the most current contact details.