LASCO HL-50 Metal Lever Handle Instruction Manual

1. Product Overview

The LASCO HL-50 is a durable metal lever handle designed as a direct replacement for existing Valley brand single-lever faucet handles. Constructed from metal with a chrome-plated finish, this handle offers both longevity and a clean aesthetic. It is engineered for easy installation, providing a reliable solution for updating or repairing your faucet.

Figure 1: The LASCO HL-50 Metal Lever Handle, featuring a chrome-plated finish and single-lever design. This image displays the handle's overall appearance and the 'H', 'C', and 'ON' indicators.

2. Key Features

• Material: Constructed from durable metal for enhanced longevity.
• Finish: Chrome-plated exterior provides a sleek, corrosion-resistant surface.
• Design: Single lever operation for easy control of water flow and temperature.
• Compatibility: Specifically designed to fit Valley brand faucets.
• Installation: Features an easy-to-install design with a setscrew mechanism.

3. Installation Instructions

This section outlines the steps for replacing your existing Valley brand faucet handle with the LASCO HL-50. Basic tools, such as an Allen wrench (hex key), may be required.

1. Turn Off Water Supply: Locate the main water shut-off valves for your faucet (typically under the sink or near the shower/tub) and turn them off to prevent water flow during installation.
2. Remove Old Handle: Identify the setscrew on your current Valley faucet handle. This is usually located on the underside or back of the handle. Use an appropriate Allen wrench to loosen and remove the setscrew. Once loosened, pull the old handle straight off the faucet stem.
3. Prepare New Handle: Ensure the faucet stem is clean and free of debris. The LASCO HL-50 handle is designed to slide directly onto the Valley faucet stem.
4. Install New Handle: Align the new LASCO HL-50 handle with the faucet stem. Slide the handle onto the stem, ensuring it is fully seated. Position the handle in the desired 'off' position.
5. Secure Handle: Locate the setscrew opening on the LASCO HL-50 handle. Insert the setscrew and tighten it firmly with an Allen wrench. Do not overtighten, as this can damage the handle or stem.
6. Restore Water Supply: Slowly turn the water shut-off valves back on.
7. Test Operation: Check the new handle for proper operation, ensuring smooth movement and no leaks.

Figure 2: Image illustrating the approximate dimensions of the LASCO HL-50 handle, showing a length of 2.8 inches (7 cm). This helps in understanding the handle's size for replacement purposes.

4. Operating the Handle

The LASCO HL-50 is a single-lever handle designed for intuitive control of your Valley brand faucet.

• Turning On/Off: Push the lever down to turn the water off. Lift the lever up to turn the water on.
• Adjusting Temperature: Move the lever to the left for hotter water (indicated by 'H') and to the right for colder water (indicated by 'C').
• Adjusting Flow: The height to which the lever is lifted controls the water flow rate. A higher lift provides more flow.

5. Care and Maintenance

To ensure the longevity and appearance of your LASCO HL-50 Metal Lever Handle, follow these simple care instructions:

• Cleaning: Clean the chrome-plated surface regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Drying: After cleaning, dry the handle thoroughly with a soft cloth to prevent water spots and maintain its shine.
• Inspection: Periodically check the setscrew for tightness. If the handle feels loose, gently retighten the setscrew.

6. Troubleshooting

If you encounter issues with your LASCO HL-50 handle, consider the following common solutions:

• Loose Handle: If the handle feels wobbly or loose, check the setscrew. Tighten it gently with an Allen wrench until the handle is secure.
• Water Leakage: If water leaks from around the handle base, ensure the handle is properly seated and the setscrew is tight. Leaks from the faucet itself may indicate an issue with the internal cartridge, which is separate from the handle and may require professional plumbing assistance or replacement of the faucet's internal components.
• Difficulty Adjusting: If the handle is stiff or difficult to move, ensure no debris is obstructing its movement. Avoid forcing the handle.

7. Product Specifications

8. Warranty Information

The LASCO HL-50 Metal Lever Handle is covered by the Larsen Supply Product Warranty, which extends for one year from the date of purchase. This warranty specifically covers parts only. For the warranty to remain valid, the product must be installed according to the manufacturer's specifications as outlined in this manual.

For warranty claims or further details, please refer to your purchase documentation or contact LASCO customer support.

9. Customer Support

If you have any questions regarding the installation, operation, or maintenance of your LASCO HL-50 Metal Lever Handle, please contact LASCO customer support. For the most up-to-date contact information, please visit the official LASCO website or refer to your product packaging.

You can also visit the LASCO Store on Amazon for additional product information and resources.