LASCO 08-2387

LASCO 08-2387 Three Function Massage Shower Head Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LASCO 08-2387 Three Function Massage Shower Head. Please read all instructions carefully before beginning installation or use to ensure proper function and longevity of the product.

LASCO 08-2387 Shower Head in packaging

Image: The LASCO 08-2387 Shower Head, chrome plated, shown in its retail packaging.

Safety Information

  • Always turn off the main water supply before attempting any plumbing installation or repair.
  • Wear appropriate safety gear, such as safety glasses, during installation.
  • Do not overtighten connections, as this can damage the product or existing plumbing.
  • If you are unsure about any step, consult a qualified plumber.

Package Contents

Verify that all components are present before beginning installation:

  • 1 x LASCO 08-2387 Three Function Massage Shower Head (Chrome Plated)

Setup and Installation

Tools Required: Adjustable wrench, thread sealant (Teflon tape).

  1. Turn off Water Supply: Locate and turn off the main water supply to your shower.
  2. Remove Old Shower Head: Unscrew the existing shower head from the shower arm. You may need an adjustable wrench for this step. Turn counter-clockwise.
  3. Clean Shower Arm Threads: Clean any old thread sealant or debris from the shower arm threads.
  4. Apply Thread Sealant: Wrap the threads of the shower arm with thread sealant (Teflon tape) 3-4 times in a clockwise direction. This helps prevent leaks.
  5. Install New Shower Head: Screw the LASCO 08-2387 shower head onto the shower arm by hand, turning clockwise until snug.
  6. Tighten: Use an adjustable wrench to gently tighten the shower head an additional quarter to half turn. Do not overtighten.
  7. Restore Water Supply: Turn the main water supply back on and check for leaks. If leaks occur, tighten slightly more or reapply thread sealant.
Close-up of LASCO 08-2387 Shower Head nozzle

Image: A close-up view of the LASCO 08-2387 Shower Head, highlighting the adjustable nozzles and chrome finish.

Operating Instructions

The LASCO 08-2387 Shower Head features three distinct spray functions:

  • Function 1: Full Spray - Provides a wide, consistent water flow for general showering.
  • Function 2: Massage Spray - Delivers a pulsating, invigorating stream.
  • Function 3: Combination Spray - Blends the full spray and massage functions for a unique experience.

To switch between functions, simply rotate the outer ring or face of the shower head in either direction until the desired spray pattern is achieved.

Maintenance

Regular cleaning will help maintain the performance and appearance of your shower head.

  • Cleaning: Clean the shower head regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the chrome finish.
  • Mineral Deposit Removal: If mineral deposits (limescale) accumulate on the nozzles, they can be gently scrubbed with a soft brush or soaked in a solution of equal parts white vinegar and water. For stubborn deposits, you may need to remove the shower head and soak it completely in the vinegar solution for several hours before rinsing thoroughly.

Troubleshooting

ProblemPossible CauseSolution
Low Water PressureMineral buildup in nozzles; partially closed water valve; low household water pressure.Clean nozzles as described in Maintenance section; ensure shower valve is fully open; consult a plumber if household pressure is consistently low.
Leaking at Connection PointInsufficient thread sealant; loose connection.Turn off water, remove shower head, reapply thread sealant, and re-tighten connection.
Difficulty Changing Spray SettingsMineral buildup preventing rotation.Clean the shower head, focusing on the rotating mechanism, using a vinegar solution if necessary.

Specifications

  • Model Number: 08-2387
  • Brand: LASCO
  • Material: Metal
  • Finish: Chrome Plated (Polished)
  • Number of Functions: 3 (Full Spray, Massage Spray, Combination Spray)
  • Installation Type: Fixed Showerhead
  • GTIN/UPC: 052151091857

Warranty and Support

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. For further assistance or technical support, please visit the official LASCO website or contact their customer service department.

You can find more information about LASCO products at the LASCO Store on Amazon.

© 2023 LASCO. All rights reserved.

Related Documents - 08-2387

Preview Larsen Supply Co. Ceramic Stems Catalog
Comprehensive catalog of ceramic faucet stems and related repair parts from Larsen Supply Co. (LASCO), featuring detailed specifications, model numbers, and compatibility information for various brands.
Preview FK technics Power Supply with Covered Terminals - Manual and Specifications
Comprehensive user manual and technical specifications for FK technics power supplies with covered terminals, including model numbers, voltage, power, current, dimensions, and safety guidelines.
Preview Smartrise Hydro:Evolved User Manual Addendum - Version 1.0
User manual addendum for the Smartrise Hydro:Evolved system, detailing parameter configurations for leveling, offsets, NTS/TSRD, and valve control. Version 1.0.
Preview herQs Single Max Vleesthermometer Handleiding
Handleiding voor de herQs Single Max draadloze vleesthermometer, inclusief installatie, bediening en probleemoplossing.
Preview Brilliant Endura Tri-Proof CCT LED Batten Installation and Specifications
Comprehensive guide for the Brilliant Endura Tri-Proof CCT LED Batten, covering installation, operation, specifications, and warranty for models 22752, 22753, and 22755.
Preview HerQs Easy BBQ Thermometer Handleiding
Gebruikershandleiding voor de HerQs Easy BBQ slimme thermometer. Leer hoe u het apparaat installeert, koppelt met uw telefoon, en gebruikt voor het monitoren van voedseltemperaturen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.