KRUPS FLF3-JW 54-Ounce Electric Kettle User Manual

1. Introduction

Thank you for choosing the KRUPS FLF3-JW Electric Kettle. This appliance is designed for quickly boiling water for various hot beverages and instant meals. Please read this manual carefully before first use to ensure safe and efficient operation.

Image 1.1: The KRUPS FLF3-JW Electric Kettle, featuring a white and brushed stainless steel exterior. The kettle has a handle, a spout, and sits on a power base.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the kettle.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or electric kettle in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• The kettle must be used only with the provided power base.
• Ensure the lid is securely closed before operating.
• Avoid contact with steam escaping from the spout or lid during and after boiling.

3. Setup

3.1 Unpacking

Carefully remove the kettle and all accessories from the packaging. Retain the packaging for future storage or transport if needed. Ensure all components are present: the electric kettle, the power base, and the integral lime-scale filter (pre-installed).

3.2 First Use Cleaning

1. Fill the kettle with fresh water up to the maximum fill line.
2. Boil the water as described in the 'Operating Instructions' section.
3. Discard the boiled water.
4. Repeat this process two to three times to remove any manufacturing residues.

The kettle is now ready for regular use.

4. Operating Instructions

4.1 Filling the Kettle

1. Remove the kettle from its power base.
2. Open the stainless-steel locking safety lid.
3. Fill the kettle with the desired amount of fresh water. Do not fill below the minimum mark or above the maximum fill line indicated by the visible water-level indicators on both sides.
4. Close the lid securely until it locks into place.

4.2 Boiling Water

1. Place the filled kettle firmly onto its 360-degree swivel power base.
2. Plug the power base into a suitable electrical outlet.
3. Press the illuminated "on" switch. The light will illuminate, indicating that the kettle is heating.
4. The kettle will automatically shut off once the water reaches a boil, and the illuminated switch will turn off.

4.3 Serving

The kettle offers cordless operation for easy serving. Simply lift the kettle from its power base to pour. The trigger-activated covered spout helps protect against accidental spilling.

5. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your KRUPS FLF3-JW Electric Kettle.

5.1 Exterior Cleaning

Wipe the exterior of the kettle with a damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the brushed stainless steel finish. Ensure the kettle is unplugged and cool before cleaning.

5.2 Interior Cleaning and Descaling

The kettle features an integral lime-scale filter for the purest results. This filter should be cleaned regularly. For descaling the interior:

1. Fill the kettle with a mixture of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling solution.
2. Bring the mixture to a boil.
3. Let it stand for at least 30 minutes, or longer for heavy scale buildup.
4. Discard the mixture and rinse the interior thoroughly with fresh water several times.
5. For the filter, remove it and rinse under running water, gently brushing off any deposits.

Product Care Instructions: Hand wash, Wipe clean.

6. Troubleshooting

If you encounter issues with your kettle, please refer to the following common problems and solutions:

7. Specifications

• Model: FLF3-JW
• Brand: KRUPS
• Capacity: 54 Ounces (1.6 Litres)
• Wattage: 1750 Watts
• Material: Brushed Stainless Steel
• Color: White
• Special Features: Automatic Shut-Off, Cordless Operation, 360-Degree Swivel Base, Illuminated "On" Switch, Visible Water-Level Indicators, Cool-Touch Handle and Body, Integral Lime-Scale Filter, Trigger-Activated Covered Spout.
• Dimensions (LxWxH): 6 x 8.5 x 9.25 inches (15.2 x 18.4 x 23.5 cm)
• Item Weight: 1 kg 560 g
• Included Components: Kettle, Power Base, Filter
• UPC: 010942203971

8. Warranty and Support

8.1 Warranty Information

This KRUPS FLF3-JW Electric Kettle comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects under normal household use. It does not cover damage resulting from misuse, neglect, commercial use, accidents, alteration, or improper maintenance.

8.2 Customer Support

For warranty claims, technical assistance, or any questions regarding your KRUPS FLF3-JW Electric Kettle, please contact KRUPS customer service. Refer to the official KRUPS website or your purchase documentation for the most current contact information.