Introduction
Thank you for purchasing the JVC UX-N1W CD Micro System. This compact audio system is designed to provide high-quality sound reproduction from various sources, including CDs, AM/FM radio, and external audio devices. Featuring bass-reflex speakers and JVC's Active Hyper-Bass Pro technology, it delivers rich, dynamic audio. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your system.
Safety Information
- Power Source: Ensure the system is connected to an AC outlet of the correct voltage as specified on the unit.
- Ventilation: Do not block ventilation openings. Allow adequate space around the unit for proper airflow to prevent overheating.
- Water and Moisture: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the system.
- Heat Sources: Keep the unit away from radiators, heat registers, stoves, or other heat-producing appliances.
- Cleaning: Unplug the system from the power outlet before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Package Contents
Please check that all items listed below are included in the package:
- JVC UX-N1W Main Unit (CD Receiver)
- Two (2) Bass-Reflex Speakers
- Remote Control with Batteries
- FM Wire Antenna
- AM Loop Antenna
- AC Power Cord
- User Manual (this document)
Figure 1: The JVC UX-N1W CD Micro System components. This image displays the central CD receiver unit, two matching bass-reflex speakers, and the included remote control. The main unit is white and black, with a front display and control buttons. The speakers are white with black grilles.
Setup
1. Unpacking and Placement
Carefully remove all components from the packaging. Place the main unit on a stable, flat surface. Position the speakers equidistant from the main unit for optimal stereo sound. Ensure there is sufficient space around the unit for ventilation.
2. Speaker Connection
- Identify the speaker wires. Each speaker has two wires, typically color-coded (e.g., red for positive, black for negative).
- Connect the speaker wires to the corresponding speaker terminals on the rear of the main unit. Ensure positive (+) terminals on the unit connect to positive (+) terminals on the speakers, and negative (-) to negative (-). Incorrect polarity will result in poor sound quality.
- Securely fasten the wires in the terminals.
3. Antenna Connection
- FM Antenna: Connect the supplied FM wire antenna to the FM antenna terminal on the rear of the unit. Extend the wire fully for best reception.
- AM Antenna: Assemble the AM loop antenna as per its instructions and connect it to the AM antenna terminals. Position it away from the main unit for optimal reception.
4. Power Connection
Connect the AC power cord to the AC IN jack on the rear of the main unit, then plug the other end into a wall outlet.
5. Auxiliary Device Connection
To connect an external audio device (e.g., iPod, MP3 player), use a 3.5mm stereo audio cable (not supplied) to connect the device's headphone output or line-out to the "IN LINE OUT" jack on the front panel of the main unit. The system features automatic source detection for this input.
Operating Instructions
1. Basic Operation
- Power On/Off: Press the POWER button on the unit or remote control to turn the system on or off.
- Volume Control: Use the VOLUME +/- buttons on the unit or remote control to adjust the sound level.
- Source Selection: Press the FUNCTION or dedicated source buttons (CD, TUNER, LINE) on the unit or remote to select the desired input source.
2. CD Playback
- Press the CD button to select the CD function.
- Press the OPEN/CLOSE button to open the CD tray.
- Place a CD (or CD-R/RW with MP3 files) with the label side up into the tray.
- Press OPEN/CLOSE again to close the tray. Playback will usually start automatically.
- Use PLAY/PAUSE, STOP, SKIP (<< / >>) buttons for playback control.
- The system supports 32-track program play, random play, and repeat play functions. Refer to the remote control for these specific buttons.
3. Radio Operation (AM/FM)
- Press the TUNER button to select the radio function.
- Press BAND to switch between FM and AM bands.
- Use the TUNE +/- buttons to manually tune to a station.
- Press and hold TUNE +/- for automatic scanning to the next available station.
- Preset Stations: To store a station, tune to the desired frequency, then press MEMORY followed by a preset number button (1-9) on the remote. To recall, press the corresponding preset number.
4. Auxiliary Input Operation
- Connect your external audio device to the "IN LINE OUT" jack on the front panel.
- The system will automatically switch to the LINE input when a signal is detected. If not, press the LINE button.
- Control playback (play, pause, skip) directly on your connected device.
5. Clock and Timer Settings
The system includes a clock with sleep and wake-up timer functions. Refer to the remote control's CLOCK, TIMER, and SLEEP buttons for detailed setup.
6. Sound Adjustments
- Active Hyper-Bass Pro: Press the HYPER-BASS PRO button on the remote to activate or deactivate enhanced bass response.
- Bass/Treble Control: Use the BASS +/- and TREBLE +/- buttons on the remote to adjust the low and high frequency levels.
Maintenance
- Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. For stubborn stains, dampen the cloth slightly with water and a mild detergent, then wipe dry. Do not use abrasive cleaners or solvents.
- CD Care: Handle CDs by their edges. Keep them clean and free of scratches. Store them in their cases when not in use.
- Speaker Grilles: Gently dust the speaker grilles with a soft brush or cloth. Do not press hard on the speaker cones.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not securely connected. | Check power cord connection to unit and wall outlet. |
| No sound | Volume is too low or muted. Speakers not connected properly. Incorrect source selected. | Increase volume. Check speaker wire connections. Select the correct input source (CD, TUNER, LINE). |
| CD does not play | CD inserted incorrectly. CD is dirty or scratched. Disc format not supported. | Insert CD with label side up. Clean the CD. Ensure it's an audio CD or CD-R/RW with MP3 files. |
| Poor radio reception | Antenna not properly connected or positioned. Interference from other electronic devices. | Adjust antenna position. Move unit away from other electronics. |
| Remote control not working | Batteries are dead or inserted incorrectly. Obstruction between remote and unit. | Replace batteries. Ensure correct polarity. Remove any obstructions. Point remote directly at the unit's sensor. |
Specifications
- Model: UX-N1W
- Power Output: 12 Watts (RMS)
- Speaker Type: Full-Range, Bass-Reflex (3 3/16 inch / 8cm cone speakers)
- CD Compatibility: CD, CD-R/RW, MP3 (on CD-R/RW)
- Tuner: AM/FM Digital Tuner
- Inputs: Front Auxiliary Input (3.5mm stereo mini jack)
- Sound Enhancements: Active Hyper-Bass Pro, Electronic Bass & Treble Tone Controls
- Timer Functions: Clock, Sleep Timer, Wake-Up Timer
- Dimensions (Main Unit): Approximately 17.7 cm (H) x 46 cm (W) x 32.99 cm (D)
- Weight: Approximately 3.79 kg (Main Unit)
- Power Requirements: AC 120V, 60Hz (or as specified on unit)
Warranty and Support
JVC provides a 1-year limited warranty for this product, covering defects in materials and workmanship from the original date of purchase. Please retain your proof of purchase for warranty claims. For technical support, service, or further inquiries, please visit the official JVC website or contact JVC customer service in your region. Do not attempt to repair the unit yourself.
For more information, visit: www.jvc.com