Introduction
The Sonic Alert SB200SS Alarm Clock is designed to provide a reliable and effective wake-up solution, especially for individuals who are hard of hearing or heavy sleepers. It combines an extra-loud alarm with a powerful bed shaker to ensure you wake up on time. This manual provides detailed instructions for setting up, operating, and maintaining your alarm clock.
Key Features:
- Extra-Loud Dual Alarm: Features an adjustable volume and tone, reaching up to 113 decibels.
- Powerful Super Shaker: A bed vibrating unit that silently wakes you without disturbing others.
- Large Display with Dimmer: A clear, easy-to-read display with 5 levels of brightness adjustment.
- Dual Time Formats: Supports both 12-hour and 24-hour time displays.
- User-Selectable Snooze & Alarm Duration: Customize snooze time from 1-30 minutes and alarm duration from 1-59 minutes.
- Improved Battery Backup: Maintains time and alarm settings for up to one week during power outages.
- Green Power Technology: Designed for energy efficiency, using 60% less energy.
Setup
Unpacking and Initial Placement:
Carefully remove all components from the packaging. Place the alarm clock on a stable, flat surface near a power outlet and your bed.
Figure 1: Sonic Alert SB200SS Alarm Clock with its Super Shaker bed vibrator.
Power Connection:
- Connect the provided power adapter to the DC input jack on the back of the alarm clock.
- Plug the power adapter into a standard electrical outlet.
Battery Backup Installation:
The alarm clock requires 2 AA batteries (included) for battery backup. This feature ensures that time and alarm settings are retained during a power outage for up to one week.
- Locate the battery compartment on the back of the unit.
- Open the battery compartment cover.
- Insert 2 AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 2: Rear view showing the battery compartment and vibrator port.
Super Shaker Placement:
Connect the Super Shaker's cord to the "VIBRATOR" port on the back of the alarm clock. For optimal vibration, place the Super Shaker under your pillow or between your mattress and box spring.
Figure 3: Proper placement of the Super Shaker under a pillow.
Operating Instructions
Setting the Time:
Use the TIME button along with the FAST and SLOW buttons to set the current time. The display supports both 12-hour and 24-hour formats.
Figure 4: Top controls for time and alarm settings.
Setting Alarms (Dual Alarms):
The SB200SS features dual alarms (AL1 and AL2) to accommodate different schedules. Use the AL.SET button to select and set each alarm time. Indicators on the display will show which alarms are active.
Alarm Mode Selection (Vibration/Buzz):
On the side of the unit, there is a switch to select the alarm mode:
- VIB/BUZZ: Activates both the Super Shaker and the audible alarm.
- VIB: Activates only the Super Shaker for silent waking.
- BUZZ: Activates only the audible alarm.
- OFF: Turns off the alarm function.
Adjusting Alarm Tone and Volume:
Use the TONE wheel on the top of the clock to adjust the frequency of the alarm sound. The VOL (Volume) wheel on the side allows you to control the loudness of the audible alarm.
Snooze Function:
Press the SNOOZE button to temporarily silence the alarm. You can set the snooze duration from 1 to 30 minutes using the time setting buttons.
Display Dimmer:
The display features a 5-level dimmer function. Press the 5 LEVEL DIMMER button to cycle through brightness levels, allowing you to adjust the display's intensity to your preference.
Alarm Duration:
You can set the duration for which the alarm will sound or vibrate, ranging from 1 to 59 minutes. Refer to the specific instructions in the full manual for setting this feature.
Alarm and Bed Shaker Test Mode:
The unit includes a test mode to verify the functionality of both the alarm sound and the bed shaker at any time. Consult the full manual for instructions on how to activate and use this test mode.
Maintenance
- Cleaning: Wipe the alarm clock and Super Shaker with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace the 9V battery in the battery backup compartment annually or if the clock loses time during a power outage.
- Storage: If storing the unit for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm does not sound/vibrate. | Alarm mode switch is set to OFF or VIB (if expecting sound). Volume is too low. Shaker not connected. | Ensure alarm mode switch is set to VIB/BUZZ or BUZZ. Increase volume. Check shaker connection. |
| Display is too bright/dim. | Dimmer setting is not optimal. | Press the 5 LEVEL DIMMER button to adjust brightness. |
| Clock loses time during power outage. | Battery backup not installed or batteries are dead. | Install new 9V battery in the battery compartment. |
| Vibrator not working. | Shaker not connected or alarm mode is not set to VIB/BUZZ or VIB. | Ensure shaker is securely plugged in. Set alarm mode switch to VIB/BUZZ or VIB. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Sonic Alert |
| Model Number | SB200SS |
| Display Type | Digital |
| Alarm Loudness | Up to 113 dB |
| Power Source | Corded Electric |
| Battery Backup | 2 AA batteries (included), up to 1 week retention |
| Product Dimensions | 5"W x 7"H |
| Item Weight | 1.1 Pounds |
| Material | Plastic |
| Special Feature | Loud Alarm, Bed Shaker, Dimmer |
Warranty and Support
The Sonic Alert SB200SS Alarm Clock comes with a One-year Sonic Alert® blast-proof warranty. For warranty claims, technical support, or further assistance, please contact Sonic Alert customer service directly. Refer to the product packaging or the official Sonic Alert website for the most current contact information.
Video: Official product overview of the Sonic Alert SB200SS Dual Alarm Clock with Super Shaker, demonstrating its features and benefits for users.
