Introduction
The Sonic Alert SBP100 Portable Vibrating Alarm Clock is designed to provide a reliable wake-up solution for individuals who are heavy sleepers, deaf, or hard of hearing, especially while traveling. This compact device features a powerful built-in vibrator, a loud audible alarm, and a clear digital display. Its portable design allows for use in various settings, ensuring you wake up on time for important events.
Image: The Sonic Alert SBP100 Portable Vibrating Alarm Clock in white, showing its compact design and digital display.
Package Contents
- Sonic Shaker™ Travel Alarm Clock (White)
- 3 AAA batteries (included)
- Travel Case (may vary by package)
Setup
1. Battery Installation
The SBP100 alarm clock is powered by 2 AA batteries for the vibrator and 1 AAA battery for the clock display. All required batteries are included.
- Locate the battery compartment on the underside of the alarm clock.
- Open the battery compartment cover.
- Insert 2 AA batteries and 1 AAA battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Image: The battery compartment of the Sonic Alert SBP100, illustrating where to insert the AA and AAA batteries.
2. Initial Placement
The SBP100 is designed for versatile placement to ensure effective waking.
- Under Pillow: Place the alarm clock under your pillow for direct vibration. Use the included pillow strap to secure it.
- Under Mattress: For stronger vibration, place the alarm clock between your mattress and box spring.
- Bedside Table: The alarm can also be placed on a bedside table, utilizing its loud buzzer.
- Portable Use: The compact design allows it to be clipped to clothing, a backpack, or carried in a pocket.
Image: The Sonic Alert SBP100 positioned under a pillow, secured by its strap, for silent vibrating alarm.
Image: Various ways to carry and secure the SBP100, including clipping it to a pillow, placing it in a pocket, attaching it to a backpack, or using it on a clipboard.
Operating Instructions
1. Setting Time and Alarm
The time and alarm controls are located on the top of the display unit when it is popped up.
Image: A detailed view of the SBP100's control buttons for setting time and alarm, located above the digital display.
- To Set Time: Press the TIME SET button. Use the HOUR and MINUTE buttons to adjust the current time.
- To Set Alarm: Press the ALARM SET/OFF button. Use the HOUR and MINUTE buttons to set your desired alarm time.
- To Turn Alarm On/Off: Use the ON/OFF switch located on the right side of the clock. Slide it to ON to activate the alarm or OFF to disable it.
2. Alarm Modes
The SBP100 offers three alarm modes: vibration only, buzzer only, or both. The mode switch is located on the left side of the alarm clock.
Image: Illustration of the three alarm modes available on the SBP100: vibration, audible alarm, or a combination of both.
- VIB: Activates the vibrator only. Ideal for silent waking or for individuals who are deaf or hard of hearing.
- BUZZ: Activates the loud 90dB pulsating buzzer only.
- VIB BUZZ: Activates both the vibrator and the loud buzzer simultaneously for maximum alert.
3. Snooze Function and Display Light
The SNOOZE/LIGHT button is located on the front of the alarm clock.
- Snooze: When the alarm sounds, press the SNOOZE/LIGHT button to activate a 4-minute snooze period. This can be reactivated for up to one hour from the original alarm setting.
- Display Light: Press the SNOOZE/LIGHT button to illuminate the display for a few seconds, allowing you to view the time in low-light conditions. This manually lit display helps conserve battery life.
4. Test Function
A test button is located on the top of the alarm clock, allowing you to check the vibrator, buzzer, and battery condition.
- Ensure the alarm is set to ON.
- Press the TEST button. The alarm will activate according to the selected mode (VIB, BUZZ, or VIB BUZZ).
- If the alarm does not activate or is weak, check the battery condition.
Maintenance
1. Battery Replacement
When the display becomes dim or the alarm functions weaken, it is time to replace the batteries. Refer to the "Battery Installation" section under Setup for instructions.
2. Cleaning
Wipe the alarm clock with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm does not sound or vibrate. |
|
|
| Display is dim or blank. | Low or dead AAA battery. | Replace the AAA battery. |
| Alarm is not loud enough. | Alarm mode set to VIB only. | Change the mode switch to BUZZ or VIB BUZZ. |
Specifications
- Model Number: RA49238
- Product Dimensions: 4.71 x 9.42 x 7.07 inches
- Item Weight: 7.1 ounces
- Power Source: 2 AA batteries (for vibrator), 1 AAA battery (for clock) - all included
- Display: 0.75" Pop-up digital display with convenience light
- Alarm Volume: Up to 90dB (buzzer)
- Snooze Duration: 4 minutes (continuous for up to 1 hour)
Warranty and Support
Warranty Information
Sonic Alert provides a 1-year warranty for this product. The warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please note the following conditions:
- The warranty is valid for products purchased from authorized sellers.
- The warranty may not cover products received through state or governmental programs.
- International product purchases may not be covered.
- Within the warranty period, your product will typically be replaced once.
- Proof of purchase and authorization for return are required for warranty claims.
Customer Support
For technical assistance, warranty claims, or any questions regarding your Sonic Alert SBP100, please contact Sonic Alert customer service. Contact details can typically be found on the official Sonic Alert website or within the product packaging.
For more information, you may visit the Sonic Alert Store on Amazon.
Product Video Overview
Video: An instructional video demonstrating the features and operation of the Sonic Alert SBP100 Portable Vibrating Alarm Clock.