Cardone 19-B1724 Remanufactured Unloaded Disc Brake Caliper with Bracket

1. Introduction

The Cardone 19-B1724 is a remanufactured unloaded disc brake caliper designed to meet rigorous quality and performance standards. This unit is engineered to provide reliable braking performance for your vehicle. It comes equipped with new, premium components to ensure longevity and is 100% pressure-tested for consistent, industry-leading brake performance. This manual provides an overview of the product, its features, and general guidelines for installation and care.

2. Product Features

• OEM Fit: As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Durable Pistons: Pistons are durable, resistant to cracking or pitting, and handle great loads. Calipers are treated with a specially formulated rust inhibitor and kept in the original equipment finish.
• Extended Life Seals: Rubber seals are replaced with high-temperature EPDM rubber for extended life and optimum performance.
• Trouble-Free Bleeding: New bleeder screws provide trouble-free bleeding and a positive seal. New washers are included where applicable.
• Eco-Friendly Process: The remanufacturing process is earth-friendly, reducing the energy and raw material needed to make a new part by 80%.
• Complete Hardware: Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. New banjo bolts are included where applicable to ensure a perfect fit and quick installation.

3. Product Overview and Components

The Cardone 19-B1724 brake caliper is a critical component of your vehicle's disc brake system. Below are images illustrating the caliper from various angles, highlighting its design and key features.

Figure 3.1: Front view of the Cardone 19-B1724 remanufactured disc brake caliper with bracket. This image shows the primary structure of the caliper, including the piston housing and the bracket where it mounts to the vehicle.

Figure 3.2: Top-down view of the caliper, providing a clear perspective of the internal cavity where brake pads would reside and the robust construction of the bracket.

Figure 3.3: Rear view of the caliper, showcasing the mounting pins and the overall sturdy design of the bracket, which secures the caliper to the vehicle's suspension.

Figure 3.4: Side view of the caliper, illustrating the location of the bleeder screw (for air removal) and the port for connecting the hydraulic brake line.

4. Installation Guidelines

Installation of brake components requires specialized knowledge and tools. It is highly recommended that this brake caliper be installed by a qualified automotive technician. Improper installation can lead to brake system failure and serious injury.

General Steps (Consult Vehicle Service Manual for Specifics):

1. Safety First: Ensure the vehicle is safely lifted and supported on jack stands. Disconnect the negative battery terminal.
2. Remove Old Caliper: Carefully disconnect the brake line from the old caliper. Be prepared for brake fluid leakage. Remove the caliper mounting bolts and slide the old caliper off the rotor.
3. Prepare New Caliper: Ensure the new Cardone caliper is clean and free of debris. Install new brake pads into the caliper if it is an unloaded unit (as this model is).
4. Mount New Caliper: Position the new caliper over the rotor and secure it with the appropriate mounting bolts. Torque bolts to manufacturer specifications.
5. Connect Brake Line: Attach the brake line to the new caliper using the new banjo bolt and washers provided (where applicable). Ensure a tight, leak-free connection.
6. Bleed Brake System: This is a critical step. Air must be removed from the brake system to ensure proper braking function. Follow the vehicle manufacturer's bleeding procedure.
7. Test Brakes: Before driving, pump the brake pedal several times to build pressure. Check for leaks. Perform a low-speed test drive in a safe area to confirm proper brake operation.

Note: New stainless steel hardware clips and new mounting pins are included where applicable to facilitate installation. A plastic cap plug protects every brake port thread to ensure trouble-free installation.

5. Operation Principles

A disc brake caliper is a hydraulic component that houses the brake pads and pistons. When the brake pedal is pressed, hydraulic pressure from the master cylinder forces the piston(s) within the caliper to push the brake pads against the rotating brake rotor. This friction converts the vehicle's kinetic energy into heat, slowing or stopping the vehicle. The Cardone 19-B1724 caliper is designed to provide precise and consistent clamping force for effective braking.

6. Maintenance and Care

Proper maintenance of your vehicle's brake system, including the calipers, is essential for safety and longevity. While the Cardone remanufactured caliper is built for durability, regular inspection is recommended.

• Regular Inspection: During routine vehicle service, have your brake calipers, pads, and rotors inspected for wear, damage, or leaks.
• Brake Fluid: Check your vehicle's brake fluid level and condition regularly. Replace brake fluid according to your vehicle manufacturer's recommendations.
• Cleanliness: Keep the area around the calipers free from excessive dirt and debris.
• Avoid Contaminants: Prevent oil, grease, or other contaminants from coming into contact with brake pads or rotor surfaces.

7. Troubleshooting and Inspection

If you experience any issues with your braking system, it is crucial to have it inspected by a qualified technician immediately. Common symptoms that may indicate a caliper issue include:

• Pulling to One Side: The vehicle pulls to the left or right when braking, which could indicate a seized caliper or uneven brake pad wear.
• Spongy Brake Pedal: A soft or spongy brake pedal can indicate air in the brake lines or a caliper issue.
• Grinding or Squealing Noises: While often indicative of worn brake pads, these noises can also be related to caliper issues if the pads are not moving freely.
• Brake Fluid Leaks: Visible brake fluid leaks around the caliper or wheel area.
• Excessive Heat: One wheel feeling significantly hotter than others after driving, suggesting a dragging caliper.

Do not attempt to repair a faulty brake caliper yourself unless you are a certified mechanic. Always prioritize safety when dealing with brake system components.

8. Specifications

9. Warranty Information

For detailed warranty information regarding your Cardone 19-B1724 Remanufactured Unloaded Disc Brake Caliper, please refer to the official Cardone website or contact Cardone customer service directly. Warranty terms and conditions may vary.

10. Customer Support

If you have any questions, require technical assistance, or need to report an issue with your Cardone product, please contact Cardone customer support through their official website or designated support channels. Have your product model number (19-B1724) and any relevant purchase information ready when contacting support.