Behringer HPX4000

BEHRINGER HPX4000 DJ Headphones User Manual

Model: HPX4000

Introduction

Thank you for choosing the BEHRINGER HPX4000 Closed-Type High-Definition DJ Headphones. These headphones are designed to deliver clear audio reproduction for DJ applications and general listening. This manual provides essential information for the safe and effective use of your new headphones.

Important Safety Instructions

Hearing Protection: Avoid listening at high volume levels for extended periods to prevent hearing damage.
Environmental Awareness: Do not use headphones in situations where inability to hear ambient sounds could be dangerous, such as driving or cycling.
Cleaning: Clean only with a dry cloth. Do not immerse in water.
Storage: Store in a cool, dry place away from extreme temperatures.
Disassembly: Do not attempt to disassemble or modify the headphones. This will void the warranty.

Package Contents

Verify that all items are present upon unpacking:

BEHRINGER HPX4000 DJ Headphones
User Manual (this document)

Note: The BEHRINGER HPX4000 headphones are sometimes sold in sets of 5 pieces. Please check your purchase details.

Key Features

High-definition bass and super-transparent highs
Ultra-high dynamic range
High-efficiency cobalt capsule
Single-sided coiled cord with oxygen-free copper wires
Round swiveling ear cups

Setup

The BEHRINGER HPX4000 headphones are designed for immediate use with compatible audio devices.

Connect to Audio Source: Insert the 3.5 mm jack of the coiled cord into the headphone output of your audio device (e.g., mixing console, MP3 player, laptop).
Adjust Fit: Place the headphones over your ears. Adjust the headband for a comfortable and secure fit. The ear cups swivel to accommodate different head shapes and wearing preferences.
Volume Control: Ensure the volume on your audio source is set to a low level before playing audio. Gradually increase the volume to a comfortable listening level.

Image: BEHRINGER HPX4000 DJ Headphones. This image shows the overall design of the headphones, featuring the over-ear cups and adjustable headband.

Operating Instructions

The HPX4000 headphones are straightforward to operate:

Audio Playback: Once connected to an audio source, simply play your desired audio.
Volume Adjustment: Use the volume controls on your connected audio device to adjust the listening level. The headphones themselves do not have integrated volume control.
Swiveling Ear Cups: The ear cups can swivel, allowing for single-ear monitoring, which is common in DJ applications.

Image: A person wearing headphones, demonstrating typical usage. The headphones are designed for comfortable over-ear listening.

Maintenance and Care

Cleaning: Use a soft, dry cloth to clean the exterior of the headphones. Do not use liquid cleaners or solvents.
Cable Care: Avoid sharp bends or excessive pulling on the coiled cord to prevent internal damage.
Storage: When not in use, store the headphones in a protective case or a clean, dry environment to prevent dust accumulation and physical damage.
Ear Pads: Over time, ear pads may show wear. Replacement ear pads may be available from authorized Behringer service centers.

Troubleshooting

Problem	Possible Cause	Solution
No sound or low volume	Cable not fully inserted Audio source volume too low Incorrect audio source selected Damaged cable or headphones	Ensure the 3.5 mm jack is fully inserted into the audio output. Increase the volume on your audio device. Verify the correct audio output is selected on your device. Test with another audio device or cable if possible. If still no sound, contact support.
Distorted sound	Volume too high on audio source Poor audio file quality Damaged headphone drivers	Reduce the volume on your audio device. Try playing a different audio file or source. If distortion persists across multiple sources and volumes, contact support.
Uncomfortable fit	Headband or ear cups not adjusted correctly	Adjust the headband length and swivel the ear cups until a comfortable fit is achieved.

Technical Specifications

Feature	Detail
Brand	Behringer
Model Number	HPX4000
Color	Black
Ear Placement	Over Ear
Form Factor	On Ear
Impedance	32 Ohms
Connectivity Technology	Wired
Headphone Jack	3.5 mm Jack
Frequency Range	20Hz - 20,000Hz
Sensitivity	100 dB
Item Weight	6.4 ounces
Cable Features	Tangle Free (Coiled Cord)
Specific Uses For Product	DJ
Compatible Devices	MP3 Players, Mixing Consoles, Laptops, Desktops, Audio Devices

Warranty Information

For detailed warranty information, please refer to the official Behringer website:

http://www.music-group.com/warranty.aspx

Customer Support

If you require further assistance or have questions not covered in this manual, please visit the official Behringer website or contact their customer support.

Behringer Official Store: Behringer Store on Amazon

For general inquiries, please visit the Behringer website for contact options.