Product Overview
The Behringer C-2 microphones are designed for high-quality stereo studio recording and live applications. They are ideal as main and support microphones for various sound sources, including choirs, pianos, and other vocal or acoustic instruments. These condenser microphones are known for their sensitivity and ability to capture subtle signals, thanks to their low-mass diaphragm.
Key features include a cardioid pickup pattern for effective feedback elimination, switchable low-frequency roll-off, and input attenuation. They also feature ultra low-noise transformerless FET input circuitry, ensuring minimal low-frequency distortion. The robust metal die-cast body and gold-plated 3-pin XLR connectors contribute to their durability and signal integrity.
- 2 matched condenser microphones for stereo studio recording and live applications
- Ideal as main and support microphones for studio and live applications
- Cardioid pickup pattern for effective feedback elimination
- Low-mass diaphragm for ultra-wide frequency response and ultimate sound reproduction
- Switchable low-frequency roll-off and input attenuation
Image: Two Behringer C-2 condenser microphones, showing their compact design and silver finish.
What's in the Box
The Behringer C-2 matched studio condenser microphones come with a comprehensive set of accessories to get you started immediately:
- 2 x Behringer C-2 Matched Studio Condenser Microphones
- 2 x Stand Adapters
- 2 x Windscreens
- 1 x Stereo Bar (for mounting both mics in stereo alignment)
- 1 x Transport Case
Image: The Behringer C-2 microphones, stand adapters, windscreens, and stereo bar neatly organized within their durable transport case.
Setup Guide
Setting up your Behringer C-2 microphones is straightforward. Follow these steps to ensure optimal performance:
- Unpack Components: Carefully remove both C-2 microphones, stand adapters, windscreens, stereo bar, and transport case contents.
- Attach Stand Adapters: Screw the provided stand adapters onto your microphone stands.
- Mount Microphones: Insert each C-2 microphone into its respective stand adapter. For stereo recording, use the included stereo bar to mount both microphones on a single stand, allowing for precise positioning.
- Apply Windscreens: Gently place the foam windscreens over the microphone capsules to reduce plosives and wind noise.
- Connect XLR Cables: Connect standard 3-pin XLR cables (not included) to the bottom of each microphone.
- Connect to Audio Interface/Mixer: Plug the other end of the XLR cables into your audio interface or mixer's microphone inputs. Ensure your device is capable of providing +48V phantom power, as condenser microphones require this for operation.
- Activate Phantom Power: Turn on the +48V phantom power on your audio interface or mixer for the connected channels.
Video: A brief product summary demonstrating the setup and key features of the Behringer C-2 microphones, including their use with the stereo bar.
Operating Instructions
The Behringer C-2 microphones offer versatile controls for various recording scenarios:
- Cardioid Pickup Pattern: The C-2 features a cardioid (heart-shaped) pickup pattern, which primarily captures sound from the front while rejecting sounds from the sides and rear. This is effective for isolating the desired sound source and minimizing feedback in live settings.
- Low-Frequency Roll-Off Switch: Located on the microphone body, this switch activates a low-cut filter. Use it to eliminate unwanted low-frequency noise such as rumble from air conditioning, handling noise, or stage vibrations. This helps in achieving a cleaner recording, especially for vocals and acoustic instruments.
- Input Attenuation (-10 dB Pad) Switch: Also on the microphone body, this switch engages a -10 dB pad. Activate this pad when recording very loud sound sources (e.g., drums, loud vocals, or amplified instruments) to prevent input overload and distortion at your mixer or interface.
Experiment with microphone placement and switch settings to achieve the best sound for your specific application.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Behringer C-2 microphones:
- Cleaning: Use a soft, dry cloth to wipe down the microphone body. Avoid using liquid cleaners or solvents, as they can damage the finish or internal components.
- Storage: Always store the microphones in their provided transport case when not in use. The case offers protection against dust, moisture, and physical damage.
- Handling: Handle the microphones with care. Avoid dropping them or exposing them to extreme temperatures or humidity.
- XLR Connectors: Ensure XLR cables are connected and disconnected gently to prevent damage to the gold-plated pins.
Troubleshooting
If you encounter issues with your Behringer C-2 microphones, consider the following common troubleshooting steps:
- No Sound Output:
- Verify that +48V phantom power is enabled on your audio interface or mixer for the correct input channels.
- Check all XLR cable connections to ensure they are secure and not damaged.
- Confirm that the input gain on your audio interface/mixer is set appropriately.
- Distorted Sound:
- Engage the -10 dB input attenuation pad on the microphone if the sound source is very loud.
- Reduce the input gain on your audio interface or mixer.
- Excessive Low-End Noise/Rumble:
- Activate the low-frequency roll-off switch on the microphone to filter out unwanted low-end frequencies.
- Ensure the microphone is isolated from vibrations (e.g., use a shock mount, if available, or place the stand on a stable surface).
- Weak or Inconsistent Signal:
- Ensure the microphone is pointed directly at the sound source (due to its cardioid pattern).
- Check for faulty cables or connections.
Specifications
| Feature | Detail |
|---|---|
| Brand | Behringer |
| Model Name | C-2 |
| Microphone Form Factor | Handheld |
| Polar Pattern | Cardioid |
| Connectivity Technology | XLR |
| Power Source | Corded Electric (requires +48V Phantom Power) |
| Frequency Response | Up to 8 KHz (ultra-wide) |
| Signal-to-Noise Ratio | 75 dB |
| Noise Level (Max SPL) | 136 dB |
| Material | Metal |
| Item Weight | 1.52 pounds |
| Product Dimensions | 11.89 x 5.12 x 3.35 inches |
Warranty and Support
The Behringer C-2 microphones come with a 1 Year Limited Warranty provided by Adorama. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or contact Adorama support.
For additional support and a comprehensive user manual, you can refer to the official PDF document available online:
