Wagner Lighting 4537

Download PDF
Contents

Wagner Lighting 4537 Standard Multi-Purpose Light Bulb User Manual

Model: 4537

1. Product Overview

The Wagner Lighting miniature lamp, model 4537, is engineered for multi-purpose applications. It features a continuous coil design that enhances resistance to shock and vibration, contributing to an extended service life. This bulb is designed to meet DOT/SAE compliance standards, ensuring it adheres to regulatory requirements for automotive lighting.

Key characteristics include high-grade stainless steel terminals to prevent corrosion and a non-reflective bottom shelf, which aids in reducing glare during adverse weather conditions such as rain, snow, and fog.

Wagner Lighting 4537 Multi-Purpose Light Bulb, rear view showing terminals

Figure 1: Rear view of the Wagner Lighting 4537 bulb, illustrating the two electrical terminals for connection.

2. Installation and Setup

Proper installation is crucial for the optimal performance and longevity of the Wagner Lighting 4537 bulb. Always ensure the vehicle's power system is off before beginning any installation or replacement procedures to prevent electrical shock or damage to the bulb or vehicle.

2.1 Safety Precautions

  • Disconnect the vehicle's battery before handling electrical components.
  • Allow existing bulbs to cool down completely before removal, as they can be very hot.
  • Wear appropriate personal protective equipment, such as gloves and eye protection.
  • Avoid touching the glass surface of the new bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.

2.2 Installation Steps

  1. Identify the correct bulb housing in your vehicle. Refer to your vehicle's service manual for specific instructions on accessing the bulb.
  2. Carefully remove the old bulb from its socket. This may involve twisting, unlatching, or unscrewing, depending on the vehicle's design.
  3. Inspect the socket and wiring for any signs of corrosion or damage. Clean if necessary.
  4. Align the terminals of the new Wagner Lighting 4537 bulb with the corresponding slots in the vehicle's socket.
  5. Gently push and/or twist the bulb into place until it is securely seated. Ensure a firm connection.
  6. Reconnect the vehicle's battery.
  7. Test the light function to confirm proper installation.
Wagner Lighting 4537 Multi-Purpose Light Bulb, front view

Figure 2: Front view of the Wagner Lighting 4537 bulb, showing the clear lens and reflector.

3. Operation

The Wagner Lighting 4537 bulb operates as a standard multi-purpose light. Once correctly installed and connected to the vehicle's electrical system, it will illuminate when the corresponding circuit is activated (e.g., turning on headlights, fog lights, or other auxiliary lights, depending on its application).

The bulb is designed for consistent light output and features a non-reflective bottom shelf to minimize glare, enhancing visibility for the driver in various conditions.

4. Maintenance

The Wagner Lighting 4537 bulb is a sealed unit and requires minimal maintenance. Its robust construction with a continuous coil and high-grade stainless steel terminals is designed for durability.

4.1 General Care

  • Periodically inspect the bulb and its housing for any signs of dirt, moisture, or damage.
  • If cleaning is necessary, use a soft, dry cloth to wipe the exterior of the bulb and housing. Avoid abrasive cleaners or excessive moisture.
  • Ensure the electrical connections remain clean and free of corrosion.

4.2 Replacement

The bulb has a finite lifespan. If the bulb dims significantly or ceases to function, it indicates the need for replacement. Follow the installation steps outlined in Section 2.2 for safe and proper replacement.

5. Troubleshooting

This section provides guidance for common issues encountered with the Wagner Lighting 4537 bulb.

ProblemPossible CauseSolution
Bulb does not illuminate.
  • Blown fuse in vehicle's electrical system.
  • Loose or corroded electrical connection.
  • Bulb has reached end of life.
  • Faulty wiring or switch.
  • Check and replace relevant fuse.
  • Ensure bulb is securely seated and connections are clean.
  • Replace the bulb.
  • Consult a qualified automotive technician for wiring inspection.
Bulb is dim or flickers.
  • Low voltage from vehicle's electrical system.
  • Corroded or poor electrical connection.
  • Bulb nearing end of life.
  • Check vehicle's battery and alternator.
  • Clean and secure electrical connections.
  • Replace the bulb.

6. Specifications

The following are the technical specifications for the Wagner Lighting 4537 Multi-Purpose Light Bulb:

AttributeDetail
ManufacturerWagner Lighting
BrandFederal Mogul
Model Number4537
Item Weight12.8 ounces
Voltage12 Volts
Wattage55 watts
Special FeaturesWaterproof
ComplianceDOT/SAE compliant
First Available DateSeptember 19, 2007
Technical diagram of Wagner Lighting 4537 bulb with dimensions

Figure 3: Technical diagram showing the dimensions of the Wagner Lighting 4537 bulb, including overall length (M.O.L.) and maximum diameter.

7. Warranty Information

Specific warranty details for the Wagner Lighting 4537 Multi-Purpose Light Bulb are provided by the manufacturer, Wagner Lighting (a Federal Mogul brand). For comprehensive information regarding warranty coverage, terms, and conditions, please refer to the official documentation included with your purchase or visit the official Wagner Lighting website.

8. Customer Support

For technical assistance, product inquiries, or support related to the Wagner Lighting 4537 Multi-Purpose Light Bulb, please contact Wagner Lighting customer service directly. Contact information, including phone numbers and online support portals, can typically be found on the product packaging or the official Wagner Lighting website.

© 2024 Wagner Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.