Flowmaster 52558
Flowmaster 52558 Super 50 Series Chambered Muffler Instruction Manual
Model: 52558 | Brand: Flowmaster
Product Overview
The Flowmaster Super 50 series muffler is an advanced design, larger than the standard 50 series Delta Flow muffler. It is specifically engineered for trucks and SUVs, but its performance characteristics also make it highly suitable for muscle car and high-performance vehicle applications. The increased case size of this muffler is instrumental in significantly reducing interior resonance, providing a deep, rich exhaust tone. Users can also expect potential improvements in fuel mileage and engine power. This muffler is constructed from durable 16 gauge aluminized steel and features full MIG welding for maximum strength and longevity.
Key Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved Horsepower, Torque and Engine Efficiency
Product Images
Figure 1: Main view of the Flowmaster Super 50 Series Chambered Muffler, showcasing its robust black finish and oval shape.
Figure 2: Side view of the Flowmaster Super 50 Series Chambered Muffler, highlighting the inlet and outlet pipes and the embossed Flowmaster logo.
Figure 3: Diagram illustrating the internal chambered design of the Flowmaster Super 50 Series Muffler, which is key to its sound and performance characteristics.
Setup and Installation
Installation of the Flowmaster Super 50 Series Chambered Muffler typically involves replacing an existing muffler in your vehicle's exhaust system. Professional installation is recommended due to the specialized tools and expertise required for proper fitment and welding.
General Installation Steps (Consult a professional or vehicle-specific guide):
- Safety First: Ensure the vehicle is securely lifted on a hoist or jack stands. Allow the exhaust system to cool completely before beginning work. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Remove Old Muffler: Locate the existing muffler. Depending on your vehicle, this may involve cutting the exhaust pipe before and after the muffler, or unbolting flanges. Support the exhaust system to prevent it from falling.
- Prepare New Muffler: Position the Flowmaster Super 50 muffler to determine the correct orientation and fit. Note the offset inlet and outlet for proper alignment.
- Secure New Muffler: If cutting was involved, use appropriate exhaust clamps or, preferably, weld the new muffler into place. Ensure all connections are tight and leak-free.
- Check Alignment: Verify that the muffler is properly aligned and does not interfere with any other vehicle components.
- Test System: Start the vehicle and check for exhaust leaks and proper sound. Listen for any unusual noises or vibrations.
For detailed, vehicle-specific instructions, please refer to your vehicle's service manual or consult a certified automotive technician.
Operating Characteristics
The Flowmaster Super 50 Series Chambered Muffler is designed to deliver a specific acoustic profile and performance benefits. Its internal chambered design, a signature of Flowmaster technology, manipulates exhaust gas flow to produce a deep, rich tone that is mild to stock at idle and low RPMs, becoming more pronounced under acceleration. The larger case size helps to minimize interior cabin resonance, providing a comfortable driving experience while still offering the characteristic Flowmaster sound. Users may experience improved horsepower, torque, and overall engine efficiency due to optimized exhaust flow.
Maintenance
The Flowmaster Super 50 Series Chambered Muffler is constructed from durable aluminized steel and is designed for long-term performance with minimal maintenance. However, periodic inspection is recommended to ensure optimal function and longevity.
Recommended Maintenance:
- Regular Visual Inspection: Periodically inspect the muffler and the entire exhaust system for signs of rust, corrosion, cracks, or damage. Pay close attention to welds and connection points.
- Check for Leaks: Listen for any hissing or blowing sounds that might indicate an exhaust leak. Leaks can reduce performance and increase noise.
- Secure Mounts: Ensure that all hangers and mounting points are secure and free from excessive wear. Loose mounts can lead to vibrations and premature failure.
- Cleanliness: While not strictly necessary for function, keeping the exterior of the muffler clean can help prevent premature corrosion, especially in areas exposed to road salt or harsh chemicals.
If any significant damage or leaks are detected, it is advisable to have the system inspected and repaired by a qualified technician.
Troubleshooting
This section addresses common issues that may arise with your exhaust system after muffler installation.
| Problem | Possible Cause | Solution |
|---|---|---|
| Excessive Noise / Louder than Expected | Exhaust leak at connections; improper installation; damaged muffler. | Check all clamps and welds for leaks. Ensure proper alignment. Inspect muffler for damage. Consult installer. |
| Rattling or Vibrations | Loose hangers or mounting points; exhaust system contacting vehicle chassis or components. | Inspect and tighten all hangers and mounts. Adjust exhaust system clearance from vehicle components. |
| Reduced Performance | Significant exhaust leak; obstruction in exhaust path (unlikely with new muffler). | Check for and repair any exhaust leaks. Ensure no foreign objects are in the exhaust path. |
| Unusual Odor | Exhaust leak allowing fumes into the cabin. | Immediately check for exhaust leaks and have them repaired. Ensure proper ventilation. |
If you are unable to resolve an issue, it is recommended to seek assistance from a qualified automotive technician.
Specifications
- Brand: Flowmaster
- Model: 52558
- Shape: Oval
- Vehicle Service Type: Car
- Item Weight: 13.9 pounds
- Exterior Finish: Painted
- Construction Material: 16 gauge aluminized steel, MIG welded
- Inlet/Outlet Configuration: 2.50 Offset IN / 2.50 Offset OUT
- UPC: 700042014125
- ASIN: B000CNJ8R6
- Date First Available: November 23, 2005
Official Product Video
Video: Flowmaster Lifestyle Video. This video provides an overview of Flowmaster's manufacturing process and highlights the quality and performance associated with their products, including the Super 50 Series mufflers. It showcases the dedication to craftsmanship and the rigorous standards applied in production.
Warranty and Support
Flowmaster products are manufactured to high standards. For specific warranty information, including terms, conditions, and duration, please refer to the official Flowmaster website or the warranty card included with your purchase. For technical support, installation assistance, or to inquire about replacement parts, please contact Flowmaster customer service directly. Contact details can typically be found on the manufacturer's website or product packaging.
Online Resources: For the most up-to-date information, product guides, and FAQs, visit the official Flowmaster website: www.flowmastermufflers.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.