Introduction
The Fabtech FTS7237 Performance Shock Absorber is engineered for enhanced vehicle suspension performance. Designed with over 25 years of experience in aftermarket suspension, this product utilizes state-of-the-art software and fabrication equipment to deliver high-quality suspension for off-road enthusiasts. It is built to provide superior damping characteristics and durability for demanding applications.
What's in the Box
- Fabtech FTS7237 Performance Shock Absorber
- Mounting Hardware (bushings, washers, nut)
Figure 1: This image displays the Fabtech FTS7237 Performance Shock Absorber, a white cylindrical unit, alongside its accompanying black rubber bushings, metal washers, and a hexagonal nut, which are essential components for installation.
Setup and Installation
Installation of the Fabtech FTS7237 Performance Shock Absorber requires mechanical knowledge and appropriate tools. It is highly recommended that installation be performed by a certified professional to ensure proper fitment and vehicle safety.
General Installation Guidelines:
- Safety First: Always ensure the vehicle is securely supported on a lift or jack stands. Disconnect the battery if working near electrical components.
- Remove Old Shock: Carefully remove the existing shock absorber, noting the orientation of all components.
- Inspect Mounting Points: Clean and inspect the vehicle's shock mounting points for any damage or wear.
- Install New Shock: Install the Fabtech FTS7237 shock absorber using the provided hardware. Ensure all bushings, washers, and nuts are correctly oriented and tightened to the manufacturer's specified torque settings.
- Final Check: After installation, re-check all fasteners for tightness and ensure there is no interference with other vehicle components.
Refer to your vehicle's service manual for specific torque specifications and detailed installation procedures.
Operating Characteristics
The Fabtech FTS7237 Performance Shock Absorber is designed to control suspension movement, providing a stable and comfortable ride while enhancing vehicle handling, especially in demanding off-road conditions. Its internal valving is tuned to optimize damping for lifted applications and increased wheel travel.
- Damping Control: Effectively manages spring oscillations, reducing bounce and improving tire contact with the road or trail.
- Durability: Constructed with robust materials to withstand harsh environments and heavy use.
- Performance: Engineered to complement Fabtech lift systems, providing balanced performance for both on-road comfort and off-road capability.
Maintenance
Regular inspection and maintenance can extend the life and performance of your Fabtech FTS7237 Performance Shock Absorber.
- Visual Inspection: Periodically inspect the shock absorber for signs of leaks, damage to the body, or worn bushings.
- Hardware Check: Ensure all mounting bolts and nuts remain tight. Re-torque if necessary according to vehicle specifications.
- Cleaning: Keep the shock body clean from excessive dirt, mud, and debris, especially around the shaft and seals.
- Bushings: Check rubber bushings for cracks, deterioration, or excessive play. Replace worn bushings promptly.
Any significant damage or fluid leaks indicate that the shock absorber may need replacement.
Troubleshooting
If you experience issues with your Fabtech FTS7237 Performance Shock Absorber, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Excessive Bouncing/Poor Ride Quality | Worn or failed shock absorber; incorrect application. | Inspect for leaks or damage. Replace if necessary. Verify correct shock for vehicle and lift. |
| Clunking/Rattling Noise | Loose mounting hardware; worn bushings. | Check and re-torque all mounting bolts. Inspect and replace worn bushings. |
| Fluid Leaks | Damaged seal; internal component failure. | A leaking shock absorber indicates failure and requires replacement. |
If problems persist after troubleshooting, consult with a qualified automotive technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Fabtech |
| Model Number | FTS7237 |
| Part Number | FTS7237 |
| Auto Part Position | Front |
| Vehicle Service Type | Car, Truck |
| Exterior Finish | Painted |
| Material | Stainless Steel |
| Item Weight | 5.2 pounds |
| Product Dimensions | 24 x 3.1 x 3.1 inches |
| UPC | 674866000094 |
Warranty and Support
For specific warranty information regarding your Fabtech FTS7237 Performance Shock Absorber, please refer to the documentation provided with your purchase or visit the official Fabtech website. For technical support or inquiries, contact Fabtech customer service directly.
Note: Warranty terms and conditions may vary and are subject to change by the manufacturer.
